* Jason Kridner <jkridner@xxxxxxxxxxxxxxx> [170601 00:43]: > On Tue, May 30, 2017 at 12:20 PM, Robert Nelson <robertcnelson@xxxxxxxxx> wrote: > > BeagleBone Blue is robotics-oriented version of the BeagleBone Black (BBB). > > > > This board can be indentified by the BLAx value after A335BNLT (BBB) > > in the at24 eeprom: > > BLAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|] > > > > http://beagleboard.org/blue > > https://github.com/beagleboard/beaglebone-blue > > > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > > wl18xx mac address: /proc/device-tree/ocp/ethernet@4a100000/slave@4a100200/mac-address > > > > Signed-off-by: Robert Nelson <robertcnelson@xxxxxxxxx> > > CC: Tony Lindgren <tony@xxxxxxxxxxx> > > CC: Jason Kridner <jkridner@xxxxxxxxxxxxxxx> > > Acked-by: Jason Kridner <jkridner@xxxxxxxxxxxxxxx> Applying into omap-for-v4.13/dt. > Discussed offline the fact that the couple of connectors where we'd > like to support dynamic pinmuxing that the required pinmux helper code > is not upstream. Hmm do you have some link for that? We do have dynamic muxing working with mainline tree using the named pinctrl modes. At least omap_hsmmc.c is doing it for am335x SDIO interrupt pin. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
