Hello Rob,
On Thu, Apr 20, 2017 at 1:56 AM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Apr 13, 2017 at 10:04:27PM -0300, Javier Martinez Canillas wrote:
>> The at24 driver allows to register I2C EEPROM chips using different vendor
>> and devices, but the I2C subsystem does not take the vendor into account
>> when matching using the I2C table since it only has device entries.
>>
>> But when matching using an OF table, both the vendor and device has to be
>> taken into account so the driver defines only a set of compatible strings
>> using the "atmel" vendor as a generic fallback for compatible I2C devices.
>>
>> So add this generic fallback to the device node compatible string to make
>> the device to match the driver using the OF device ID table.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>> ---
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>> arch/arm/boot/dts/am335x-baltos.dtsi | 2 +-
>> arch/arm/boot/dts/am335x-base0033.dts | 2 +-
>> arch/arm/boot/dts/am335x-bone-common.dtsi | 10 +++++-----
>> arch/arm/boot/dts/am335x-nano.dts | 2 +-
>> arch/arm/boot/dts/am335x-pepper.dts | 2 +-
>> arch/arm/boot/dts/am335x-shc.dts | 2 +-
>> arch/arm/boot/dts/am335x-sl50.dts | 2 +-
>> arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
>> arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
>> arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
>> arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +-
>> arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
>> arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
>> arch/arm/boot/dts/omap3-sb-t35.dtsi | 2 +-
>> arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 +-
>> arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
>> arch/arm/boot/dts/omap5-sbc-t54.dts | 2 +-
>> 17 files changed, 21 insertions(+), 21 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
>> index d42b98f15e8b..6ca780d0623f 100644
>> --- a/arch/arm/boot/dts/am335x-baltos.dtsi
>> +++ b/arch/arm/boot/dts/am335x-baltos.dtsi
>> @@ -255,7 +255,7 @@
>> };
>>
>> at24@50 {
>> - compatible = "at24,24c02";
>> + compatible = "at24,24c02", "atmel,24c02";
>
> I think you can just drop the at24 compatibles. A new kernel doesn't
> need it. An old kernel ignores the manufacturer. I checked that u-boot
> only matches on "atmel,*", so okay there. Don't know about the *BSDs. I
> couldn't find anything.
>
That's a very good point, it doesn't make sense indeed to keep them,
since the vendor prefix can as you said be ignored (until the OF
modalias report is fixed).
I'll re-spin the series dropping them. Thanks a lot.
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
