Hi,
On Wed, May 10, 2017 at 11:42:27AM +0300, Peter Ujfalusi wrote:
> We have one register for each EP to set the maximum packet size for both
> TX and RX.
> If for example an RX programming would happen before the previous TX
> transfer finishes we would reset the TX packet side.
>
> To fix this issue, only modify the TX or RX part of the register.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> drivers/usb/musb/tusb6010_omap.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
> index db2e4c379ccf..4e1a6e4a61b8 100644
> --- a/drivers/usb/musb/tusb6010_omap.c
> +++ b/drivers/usb/musb/tusb6010_omap.c
> @@ -389,15 +389,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
>
> if (chdat->tx) {
> /* Send transfer_packet_sz packets at a time */
> - musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
> - chdat->transfer_packet_sz);
> + u32 psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
checkpatch.pl complains about declaration and assignment together.
> + psize &= ~0x7ff;
> + psize |= chdat->transfer_packet_sz;
> + musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
>
> musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
> TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
> } else {
> /* Receive transfer_packet_sz packets at a time */
> - musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
> - chdat->transfer_packet_sz << 16);
> + u32 psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
and at here too.
> + psize &= ~(0x7ff << 16);
> + psize |= (chdat->transfer_packet_sz << 16);
> + musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
>
> musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
> TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
Regards,
-Bin.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
