Russell,
On 04/05/2017 09:33 AM, Tony Lindgren wrote:
* Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx> [170405 07:02]:
On Tue, Apr 04, 2017 at 09:11:52AM -0700, Tony Lindgren wrote:
Russell,
* Dave Gerlach <d-gerlach@xxxxxx> [170328 13:57]:
Certain SoCs like Texas Instruments AM335x and AM437x require parts
of the EMIF PM code to run late in the suspend sequence from SRAM,
such as saving and restoring the EMIF context and placing the memory
into self-refresh.
One requirement for these SoCs to suspend and enter its lowest power
mode, called DeepSleep0, is that the PER power domain must be shut off.
Because the EMIF (DDR Controller) resides within this power domain, it
will lose context during a suspend operation, so we must save it so we
can restore once we resume. However, we cannot execute this code from
external memory, as it is not available at this point, so the code must
be executed late in the suspend path from SRAM.
This patch introduces a ti-emif-sram driver that includes several
functions written in ARM ASM that are relocatable so the PM SRAM
code can use them. It also allocates a region of writable SRAM to
be used by the code running in the executable region of SRAM to save
and restore the EMIF context. It can export a table containing the
absolute addresses of the available PM functions so that other SRAM
code can branch to them. This code is required for suspend/resume on
AM335x and AM437x to work.
In addition to this, to be able to share data structures between C and
the ti-emif-sram-pm assembly code, we can automatically generate all of
the C struct member offsets and sizes as macros by making use of the ARM
asm-offsets file. In the same header that we define our data structures
in we also define all the macros in an inline function and by adding a
call to this in the asm_offsets file all macros are properly generated
and available to the assembly code without cluttering up the asm-offsets
file.
Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx>
---
arch/arm/kernel/asm-offsets.c | 6 +
drivers/memory/Kconfig | 10 ++
drivers/memory/Makefile | 4 +
drivers/memory/emif.h | 17 ++
drivers/memory/ti-emif-pm.c | 295 ++++++++++++++++++++++++++++++++++
drivers/memory/ti-emif-sram-pm.S | 334 +++++++++++++++++++++++++++++++++++++++
include/linux/ti-emif-sram.h | 143 +++++++++++++++++
7 files changed, 809 insertions(+)
create mode 100644 drivers/memory/ti-emif-pm.c
create mode 100644 drivers/memory/ti-emif-sram-pm.S
create mode 100644 include/linux/ti-emif-sram.h
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 608008229c7d..d728b5660e36 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -28,6 +28,7 @@
#include <asm/vdso_datapage.h>
#include <asm/hardware/cache-l2x0.h>
#include <linux/kbuild.h>
+#include <linux/ti-emif-sram.h>
/*
* Make sure that the compiler and target are compatible.
@@ -183,5 +184,10 @@ int main(void)
#ifdef CONFIG_VDSO
DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store));
#endif
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+ BLANK();
+ ti_emif_offsets();
+#endif
+
return 0;
}
Does the above look OK to you?
I'm not going to comment on this yet, but I'll instead comment on the
newly appeared sram_exec_copy() stuff.
So, a few years ago, we went to significant effort in ARM land to come
up with a way to _safely_ copy assembler from the kernel into SRAM,
because copying code to SRAM that is compiled in thumb mode and then
executing it is _not_ as simple as memcpy(), cast the pointer to a
function pointer, and then call the function pointer.
The SRAM stuff throws all that out, instead preferring the dumb memcpy()
approach.
This needs resolving, and I'd like to see it resolved to the satisfaction
of architecture maintainers before we progress any further down this
route.
I'm sure you are referring to fncpy, correct? This is what we used before with
ARM specific code to do the copy, but we've moved into drivers now. What are
your thoughts on exposing fncpy outside of arch/arm?
Regards,
Dave
OK thanks, will wait until that is sorted out before merging any
of the SRAM code.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
