Droid 4 has two modems, mdm6600 and w3glte. Both are on the HCI USB controller. Let's add a configuration for the HCI so the modems can be enabled. Note that the modems still need GPIO based configuration that can be done with the test-d4-echi shell script I've posted to: http://muru.com/linux/d4/test-d4-ehci Cc: devicetree@xxxxxxxxxxxxxxx Cc: Marcel Partap <mpartap@xxxxxxx> Cc: Michael Scott <michael.scott@xxxxxxxxxx> Cc: Sebastian Reichel <sre@xxxxxxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -71,6 +71,11 @@ regulator-always-on; }; + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + }; + /* LCD regulator from sw5 source */ lcd_regulator: regulator-lcd { compatible = "regulator-fixed"; @@ -475,6 +480,15 @@ &omap4_pmx_core 0x17c>; }; +&usbhsehci { + phys = <&hsusb1_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>; -- 2.11.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
