[PATCH v2 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>From fe0a37d5e53381c3f79c6b6cf7915e44789f516f Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@xxxxxx>
Date: Tue, 7 Feb 2017 16:52:57 +0530
Subject: [PATCH 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO

Introduce HWMOD_CLKDM_NOAUTO flag that allows the hwmod's
clockdomain to be prevented from HW_AUTO while the hwmod is active.

This is needed to workaround some modules which don't function
correctly with HW_AUTO. e.g. DCAN on DRA7.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
[nsekhar@xxxxxx: rebased to v4.9 kernel]
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
---
v2:
- add comment explaining why we don't call clkdm_deny_idle() in _idle()

 arch/arm/mach-omap2/omap_hwmod.c | 9 +++++++--
 arch/arm/mach-omap2/omap_hwmod.h | 5 +++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 0da4f2e..360fded 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2092,7 +2092,7 @@ static int _enable(struct omap_hwmod *oh)
 
 	r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
 		-EINVAL;
-	if (oh->clkdm)
+	if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
 		clkdm_allow_idle(oh->clkdm);
 
 	if (!r) {
@@ -2149,7 +2149,12 @@ static int _idle(struct omap_hwmod *oh)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 
-	if (oh->clkdm)
+	/*
+	 * If HWMOD_CLKDM_NOAUTO is set then we don't
+	 * deny idle the clkdm again since idle was already denied
+	 * in _enable()
+	 */
+	if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
 		clkdm_deny_idle(oh->clkdm);
 
 	if (oh->flags & HWMOD_BLOCK_WFI)
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 9e1c4ed..cda553a 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -531,6 +531,10 @@ struct omap_hwmod_omap4_prcm {
  *     operate and they need to be handled at the same time as the main_clk.
  * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
  *     IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
+ * HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from
+ *     entering HW_AUTO while hwmod is active. This is needed to workaround
+ *     some modules which don't function correctly with HW_AUTO. For example,
+ *     DCAN on DRA7x SoC needs this to workaround errata i893.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -548,6 +552,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_RECONFIG_IO_CHAIN			(1 << 13)
 #define HWMOD_OPT_CLKS_NEEDED			(1 << 14)
 #define HWMOD_NO_IDLE				(1 << 15)
+#define HWMOD_CLKDM_NOAUTO			(1 << 16)
 
 /*
  * omap_hwmod._int_flags definitions
-- 
2.7.4


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux