Re: [PATCH] phy: cpcap-usb: Add CPCAP PMIC USB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Mar 16, 2017 at 08:51:52PM -0700, Tony Lindgren wrote:
> Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a
> multiplexing USB PHY.
> 
> This USB PHY can operate at least in four modes using pin multiplexing
> and two control GPIOS:
> 
> - Pass through companion PHY for the SoC USB PHY
> - ULPI PHY for the SoC
> - Pass through USB for the modem
> - UART debug console for the SoC
> 
> This patch adds support for droid 4 USB PHY and debug UART modes,
> support for other modes can be added later on as needed.
> 
> Both peripheral and host mode are working for the USB. The
> host mode depends on the cpcap-charger driver for VBUS.
> 
> VBUS and ID pin detection are done using cpcap-adc IIO ADC
> driver.

I tested UART, USB slave (cdc-ether) & USB host (keyboard & touchpad
from Atrix lapdock) mode with Droid 4:

Tested-by: Sebastian Reichel <sre@xxxxxxxxxx>

-- Sebastian

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux