Hi, On Sat, Mar 04, 2017 at 09:43:55PM -0800, Tony Lindgren wrote: > The TI LMU driver has not yet been merged, but the device > tree binding for TI LMU drivers has been acked already > earlier by Rob Herring <robh+dt@xxxxxxxxxx>. So it should > be safe to apply to cut down the number of pending patches. > > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: Marcel Partap <mpartap@xxxxxxx> > Cc: Michael Scott <michael.scott@xxxxxxxxxx> > Cc: Milo Kim <milo.kim@xxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Sebastian Reichel <sre@xxxxxxxxxx> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Tested-By: Sebastian Reichel <sre@xxxxxxxxxx> I had to add https://patchwork.kernel.org/patch/7704601/ in addition to the patches recently queued into MFD. It would be nice to get that into 4.12 - @Milo Kim: What's your plan on that patch? -- Sebastian > --- > arch/arm/boot/dts/omap4-droid4-xt894.dts | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts > --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts > +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts > @@ -180,6 +180,25 @@ > }; > }; > > +&i2c1 { > + lm3532@38 { > + compatible = "ti,lm3532"; > + reg = <0x38>; > + > + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; > + > + backlight { > + compatible = "ti,lm3532-backlight"; > + > + lcd { > + led-sources = <0 1 2>; > + ramp-up-msec = <1>; > + ramp-down-msec = <0>; > + }; > + }; > + }; > +}; > + > /* > * REVISIT: Add gpio173 reset pin handling to the driver, see gpio-hog above. > * If the GPIO reset is used, we probably need to have /lib/firmware/maxtouch.fw > -- > 2.11.1
Attachment:
signature.asc
Description: PGP signature
