Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/14/2017 11:41 AM, Tony Lindgren wrote:
> * Andrew F. Davis <afd@xxxxxx> [170314 09:04]:
>> On 03/14/2017 10:17 AM, Tony Lindgren wrote:
>>> * Tero Kristo <t-kristo@xxxxxx> [170314 00:32]:
>>>> On 13/03/17 22:52, Tony Lindgren wrote:
>>>>> Additionally we also need to fix the hot-unplug code to properly park CPU1
>>>>> to the bootrom loop so it's not affected by SDRAM changes done by kexec
>>>>> booting kernel.
>>>>
>>>> Imo, we are doing too much bandaid hackery for this issue now. How much do
>>>> we care if the older kernels don't work properly with kexec? I know I don't
>>>> care a bit myself. It means you just need to do 1 cold-boot for the system
>>>> to fix it.
>>>
>>> Well kexec is a standard Linux feature and it is currently working and
>>> at least I care.
>>>
>>> And if the CPU1 start-up address is programmed to be in the currently
>>> booting kernel's area by something else, it's almost certainly totally
>>> broken.
>>>
>>
>> I disagree, the core can be parked correctly and still have the boot-to
>> address point to anywhere. There are two registers in play here, one
>> sets the target jump-to address, the other lets it out of the parking
>> loop. To know we are not parked we need to check the parking release
>> register, the jump-to address is completely irrelevant as a check for
>> proper parking.
> 
> Well at this point we have CPU1 parked and configured for a wrong
> start-up address. So the boot-to address is a valid check. I can
> certainly add a check for CPU1 being parked too.
> 
>>> Note that this still does not remove the need to park CPU1 properly to
>>> bootrom loop.
>>>
>>
>> I agree, and if we always park the the core correctly every time then
>> there is no reason to do all these checks and resets, we just boot as
>> normal.
> 
> Correct. And these sanity checks are still needed to keep things
> working and fix the regression you reported.
> 
>> If the core is not parked correctly then the system is messed up and
>> should be cold-booted, we have no way to know whether that core is off
>> running in space wreaking stuff.
>>
>> I cannot think of any reliable test, for now the focus should be
>> figuring out why we have escaped cores in the first place.
> 
> Well I think we got there as omap4 powers CPU1 off in idle. And now
> we have dra7 using the same code and not doing that.
> 

I think this is the case, it may be useful to have them take different
paths.

>> In my testing, core1 always ends up looping in omap4_cpu_die(), the loop
>> in this function doesn't check for the boot-to address register, just
>> the core release register. I'm not sure how this works at all, if even
>> in the same kernel, when trying to bring this core back up it will
>> ignore our set boot-to address and return to the caller of this
>> function. Maybe the kernel is able to cope with that, but it does not
>> seem to be the intended wakeup path.
> 
> The kernel wakeup_secondary() loops won't work without reset naturally
> as that area of memory will be overwritten with different code by the
> new kernel booting depending on the kernel version. It only works
> kexec booting the same exact kernel version by luck because the code
> at that address stays the same. So not very usable :)
> 
>> I'll do some testing and see if this will help in omap4_cpu_die():
>>
>> if (boot_cpu == smp_processor_id()) {
>> 	/*
>> 	 * OK, proper wakeup, we're done
>> 	 */
>> +
>> +	boot_address = readl_relaxed(base + OMAP_AUX_CORE_BOOT_1);
>> +	boot_address();
>> +
>> 	break;
>> }
> 
> That's not going to help unless the boot_address is in the bootrom
> so it won't get trashed by the next booting kernel in kexec case.
> Or else we need to relocate the loop out of the way and that too
> gets messy as it can still be overwritten by appended dtb or
> initramfs. So it would really be best to have bootloader configure
> CPU1, then park it back to bootrom loop both in u-boot and kernel.
> Presumably the bootrom loop won't affect CPU1 state so this should
> be doable.
> 

We re-park cpu1 in bootROM in U-Boot already, in the U-Boot tree:
arch/arm/mach-omap2/omap5/sec_entry_cpu1.S

omap_smc_sec_cpu1() wakes up cpu1 into the function cpu1_entry(), this
makes an SMC call to setup the core, then re-parks itself back in bootROM.
Relevant code to run on cpu1:

> #define AUX_CORE_BOOT_0		0x48281800
> #define AUX_CORE_BOOT_1		0x48281804
> /* DRA7xx ROM code function "startup_BootSlave". This function is where CPU1
>  * waits on WFE, polling on AUX_CORE_BOOT_x registers.
>  * This address is same for J6 and J6 Eco.
>  */
> #define ROM_FXN_STARTUP_BOOTSLAVE     0x00038a64
>
> ldr	r4, =AUX_CORE_BOOT_0
> mov	r5, #0x0
> str	r5, [r4]
> ldr	r4, =ROM_FXN_STARTUP_BOOTSLAVE
> bx	r4	@ Jump back to ROM

We would have to do this in kernel. The issue I'm thinking we are going
to hit is that the parking function in bootROM expects the MMU to be
off. Although we don't really need to turn it off as long as we can
identity map the bootROM area, the AUX_CORE_BOOT_0/1 space, and wherever
we plan to exit the parking loop.

Andrew

> Regards,
> 
> Tony
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux