Re: [PATCH] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine

[Alexandre Bailon <abailon@xxxxxxxxxxxx>]

Hello Serge,


On 03/29/2017 06:16 PM, Sergei Shtylyov wrote:
> Hello!
>
> On 03/29/2017 07:09 PM, Alexandre Bailon wrote:
>
> > The CPPI 4.1 DMA is sharing its clock with the USB OTG,
> > and most of the time, the clock will be enabled by USB.
> > But during the init of the DMA, USB is not enabled (waiting for DMA),
> > and then we must enable the clock before to do anything.
>
>    s/to do/doing/.
>
> > Add the clock for the CPPI 4.1 DMA engine.
> >
> > Note:
> > This patch is to apply instead of:
> > "ARM: davinci: Make the usb20 clock available to PM runtime"
> >
> > Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
> > ---
> >  arch/arm/mach-davinci/da830.c    | 1 +
> >  arch/arm/mach-davinci/da850.c    | 1 +
> >  arch/arm/mach-davinci/da8xx-dt.c | 2 ++
> >  3 files changed, 4 insertions(+)
> >
> > diff --git a/arch/arm/mach-davinci/da830.c 
> > b/arch/arm/mach-davinci/da830.c
> > index 073c458..ae4a8a5 100644
> > --- a/arch/arm/mach-davinci/da830.c
> > +++ b/arch/arm/mach-davinci/da830.c
> > @@ -413,6 +413,7 @@ static struct clk_lookup da830_clks[] = {
> >      CLK("davinci-mcasp.1",    NULL,        &mcasp1_clk),
> >      CLK("davinci-mcasp.2",    NULL,        &mcasp2_clk),
> >      CLK("musb-da8xx",    "usb20",    &usb20_clk),
> > +    CLK("cppi41-dmaengine",    NULL,        &usb20_clk),
> >      CLK(NULL,        "aemif",    &aemif_clk),
> >      CLK(NULL,        "aintc",    &aintc_clk),
> >      CLK(NULL,        "secu_mgr",    &secu_mgr_clk),
> > diff --git a/arch/arm/mach-davinci/da850.c 
> > b/arch/arm/mach-davinci/da850.c
> > index ccad2f9..9739aaa 100644
> > --- a/arch/arm/mach-davinci/da850.c
> > +++ b/arch/arm/mach-davinci/da850.c
> > @@ -560,6 +560,7 @@ static struct clk_lookup da850_clks[] = {
> >      CLK("davinci-nand.0",    "aemif",    &aemif_nand_clk),
> >      CLK("ohci-da8xx",    "usb11",    &usb11_clk),
> >      CLK("musb-da8xx",    "usb20",    &usb20_clk),
> > +    CLK("cppi41-dmaengine",    NULL,        &usb20_clk),
> >      CLK("spi_davinci.0",    NULL,        &spi0_clk),
> >      CLK("spi_davinci.1",    NULL,        &spi1_clk),
> >      CLK("vpif",        NULL,        &vpif_clk),
> > diff --git a/arch/arm/mach-davinci/da8xx-dt.c 
> > b/arch/arm/mach-davinci/da8xx-dt.c
> > index e3cef50..5bf08ba 100644
> > --- a/arch/arm/mach-davinci/da8xx-dt.c
> > +++ b/arch/arm/mach-davinci/da8xx-dt.c
> > @@ -53,6 +53,8 @@ static struct of_dev_auxdata da850_auxdata_lookup[] 
> > __initdata = {
> >      OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
> >      OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", 
> > NULL),
> >      OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL),
> > +    OF_DEV_AUXDATA("ti,da830-cppi41", 0x01e01000, "cppi41-dma-engine",
>
>    Not "cppi41-dmaengine"?
Oops. I should I removed this line. It must be made in the da8xx.c USB 
driver.
> [...]
>
> MBR, Sergei
Regards,
Alexandre
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html