We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, charger, HDMI audio, LEDs, RTC, ADC, and USB working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/configs/omap2plus_defconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -213,6 +213,7 @@ CONFIG_KEYBOARD_TWL4030=m # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m CONFIG_TOUCHSCREEN_PIXCIR=m @@ -220,6 +221,7 @@ CONFIG_TOUCHSCREEN_TSC2004=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y +CONFIG_INPUT_CPCAP_PWRBUTTON=m CONFIG_INPUT_TPS65218_PWRBUTTON=m CONFIG_INPUT_TWL4030_PWRBUTTON=m CONFIG_INPUT_PALMAS_PWRBUTTON=m @@ -256,7 +258,9 @@ CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m CONFIG_POWER_AVS=y CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y CONFIG_BATTERY_BQ27XXX=m +CONFIG_CHARGER_CPCAP=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_TWL4030=m CONFIG_CHARGER_BQ2415X=m @@ -278,6 +282,7 @@ CONFIG_DRA752_THERMAL=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=m CONFIG_TWL4030_WATCHDOG=m +CONFIG_MFD_CPCAP=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y @@ -285,7 +290,9 @@ CONFIG_MFD_TI_LP873X=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_CPCAP=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_LM363X=m CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_LP873X=y CONFIG_REGULATOR_PALMAS=y @@ -354,6 +361,7 @@ CONFIG_SND_SOC=m CONFIG_SND_EDMA_SOC=m CONFIG_SND_AM33XX_SOC_EVM=m CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m @@ -418,6 +426,7 @@ CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CPCAP=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PCA963X=m CONFIG_LEDS_PWM=m @@ -436,6 +445,7 @@ CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=m CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_OMAP=m +CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y CONFIG_DMA_OMAP=y CONFIG_TI_EDMA=y @@ -448,6 +458,7 @@ CONFIG_IIO=m CONFIG_IIO_SW_DEVICE=m CONFIG_IIO_SW_TRIGGER=m CONFIG_IIO_ST_ACCEL_3AXIS=m +CONFIG_CPCAP_ADC=m CONFIG_TI_AM335X_ADC=m CONFIG_BMP280=m CONFIG_PWM=y @@ -456,6 +467,7 @@ CONFIG_PWM_TIECAP=m CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m +CONFIG_PHY_CPCAP_USB=m CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_USB2=m CONFIG_TI_PIPE3=y -- 2.12.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
