On 02/14/2017 12:51 PM, Tony Lindgren wrote:
Nishanth,
* Tony Lindgren <tony@xxxxxxxxxxx> [161230 10:50]:
Add dra7 iodelay configuration and use it for MMC.
I just noticed that this patch should probably be:
From: Nishanth Menon <nm@xxxxxx>
I think I just added the description to the patch.
Can you please confirm and reply with your Signed-off-by
if that's the case?
Though I had introduced the node [
http://git.ti.com/ti-linux-kernel/ti-linux-kernel/commit/34661cbccc679bb8d91768bc78495e94e6d40f1f
], the x15 values were first introduced by Kishon.
http://git.ti.com/ti-linux-kernel/ti-linux-kernel/commit/1463b1e8facb7180f5679b373411b3fbeb1608fd
personally, From or not really does'nt matter as long as we can get
the solution in.
So, as long as it helps..
Signed-off-by: Nishanth Menon <nm@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 21 ++++++++++++++++++++-
arch/arm/boot/dts/dra7.dtsi | 8 ++++++++
include/dt-bindings/pinctrl/dra.h | 4 ++++
3 files changed, 32 insertions(+), 1 deletion(-)
---
And ere are the related dts changes.
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -190,6 +190,25 @@
>;
};
};
+
+&dra7_iodelay_core
+{
+ mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */
+ 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */
+ 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */
+ 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1ec A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */
+ 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ >;
+ };
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -452,7 +471,7 @@
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-0 = <&mmc2_pins_default &mmc2_iodelay_3v3_conf>;
vmmc-supply = <&vdd_3v3>;
bus-width = <8>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -401,6 +401,14 @@
reg = <0x40d00000 0x100>;
};
+ dra7_iodelay_core: padconf@4844a000 {
+ compatible = "ti,dra7-iodelay";
+ reg = <0x4844a000 0x0d1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -73,5 +73,9 @@
*/
#define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val)
+/* DRA7 IODELAY configuration parameters */
+#define A_DELAY_PS(val) ((val) & 0xffff)
+#define G_DELAY_PS(val) ((val) & 0xffff)
+
#endif
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
