From: Tony Lindgren <tony@xxxxxxxxxxx>
Things are a bit whacked right now for panel-dsi-cm:
1. We're missing call to of_get_display_timing() and
videomode_from_timing()
2. We need to call dsicm_probe_of() after we initialize the
default values to not overwrite device tree configured
values
3. We need to implement minimal get_timings() and check_timings()
for the panel to work
With these changes we get panel-dsi-cm to probe with device tree
configuraion. Note that the dsicm_check_timings adapted from an
earlier patch by Sebastian Reichel <sre@xxxxxxxxxx>.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Tested-By: Sebastian Reichel <sre@xxxxxxxxxx>
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 65 ++++++++++++++++++++-----
1 file changed, 52 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index ac5800c72cb4..ad1058fafe92 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -25,6 +25,7 @@
#include <linux/of_gpio.h>
#include <video/mipi_display.h>
+#include <video/of_display_timing.h>
#include "../dss/omapdss.h"
@@ -379,13 +380,6 @@ static const struct backlight_ops dsicm_bl_ops = {
.update_status = dsicm_bl_update_status,
};
-static void dsicm_get_resolution(struct omap_dss_device *dssdev,
- u16 *xres, u16 *yres)
-{
- *xres = dssdev->panel.vm.hactive;
- *yres = dssdev->panel.vm.vactive;
-}
-
static ssize_t dsicm_num_errors_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1106,6 +1100,36 @@ static void dsicm_ulps_work(struct work_struct *work)
mutex_unlock(&ddata->lock);
}
+static void dsicm_get_timings(struct omap_dss_device *dssdev,
+ struct videomode *vm)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *vm = ddata->vm;
+}
+
+static int dsicm_check_timings(struct omap_dss_device *dssdev,
+ struct videomode *vm)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ int ret = 0;
+
+ if (vm->hactive != ddata->vm.hactive)
+ ret = -EINVAL;
+
+ if (vm->vactive != ddata->vm.vactive)
+ ret = -EINVAL;
+
+ if (ret) {
+ dev_warn(dssdev->dev, "wrong resolution: %d x %d",
+ vm->hactive, vm->vactive);
+ dev_warn(dssdev->dev, "panel resolution: %d x %d",
+ ddata->vm.hactive, ddata->vm.vactive);
+ }
+
+ return ret;
+}
+
static struct omap_dss_driver dsicm_ops = {
.connect = dsicm_connect,
.disconnect = dsicm_disconnect,
@@ -1116,7 +1140,10 @@ static struct omap_dss_driver dsicm_ops = {
.update = dsicm_update,
.sync = dsicm_sync,
- .get_resolution = dsicm_get_resolution,
+ .get_timings = dsicm_get_timings,
+ .check_timings = dsicm_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
.get_recommended_bpp = omapdss_default_get_recommended_bpp,
.enable_te = dsicm_enable_te,
@@ -1130,7 +1157,8 @@ static int dsicm_probe_of(struct platform_device *pdev)
struct device_node *node = pdev->dev.of_node;
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *in;
- int gpio;
+ struct display_timing timing;
+ int gpio, err;
gpio = of_get_named_gpio(node, "reset-gpios", 0);
if (!gpio_is_valid(gpio)) {
@@ -1147,6 +1175,17 @@ static int dsicm_probe_of(struct platform_device *pdev)
return gpio;
}
+ err = of_get_display_timing(node, "panel-timing", &timing);
+ if (!err) {
+ videomode_from_timing(&timing, &ddata->vm);
+ if (!ddata->vm.pixelclock)
+ ddata->vm.pixelclock =
+ ddata->vm.hactive * ddata->vm.vactive * 60;
+ } else {
+ dev_warn(&pdev->dev,
+ "failed to get video timing, using defaults\n");
+ }
+
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
@@ -1181,14 +1220,14 @@ static int dsicm_probe(struct platform_device *pdev)
if (!pdev->dev.of_node)
return -ENODEV;
- r = dsicm_probe_of(pdev);
- if (r)
- return r;
-
ddata->vm.hactive = 864;
ddata->vm.vactive = 480;
ddata->vm.pixelclock = 864 * 480 * 60;
+ r = dsicm_probe_of(pdev);
+ if (r)
+ return r;
+
dssdev = &ddata->dssdev;
dssdev->dev = dev;
dssdev->driver = &dsicm_ops;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
