Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] omap-fixes for -rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP 3430 Camera/ISP out of memory error
  • From: Patrick Radius <info@xxxxxxxxxxx>
• Re: OMAP 3430 Camera/ISP out of memory error
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: "Avinash.H.M." <avinashhm@xxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: "Avinash.H.M." <avinashhm@xxxxxx>
• Re: [PATCH] OMAP3: l3: fix for "irq 10: nobody cared" message
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH] OMAP3: l3: fix for "irq 10: nobody cared" message
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH/RFC 00/19] OMAP: voltage layer cleanup and restructure
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH/RFC 00/19] OMAP: voltage layer cleanup and restructure
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or missing MAC addresses for eth0 and wlan0
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or missing MAC addresses for eth0 and wlan0
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or missing MAC addresses for eth0 and wlan0
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] OMAP: iovmm: fix SW flags passed by user
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH v2] OMAP: iovmm: fix SW flags passed by user
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or missing MAC addresses for eth0 and wlan0
  • From: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: iovmm: fix SW flags passed by user
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] iommu: Prevent oops in iommu_get() and while arch_iommu is in use
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: OMAP 3430 Camera/ISP out of memory error
  • From: Patrick Radius <info@xxxxxxxxxxx>
• Re: [PATCH] OMAP: iovmm: fix SW flags passed by user
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] OMAP: iovmm: fix SW flags passed by user
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] OMAP: iovmm: fix SW flags passed by user
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH/RFC 13/19] OMAP2+: voltage: keep track of powerdomains in each voltagedomain
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 10/19] OMAP3: powerdomain data: add voltage domains
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 04/19] OMAP2+: voltage: start towards a new voltagedomain layer
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH] omap: fix compiler warning
  • From: Michael Jones <michael.jones@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] clock: Integrate TI816X clock data into OMAP clock framework
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH 3/4] TI816X: clock: Add clockdomains and powerdomains data
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH 2/4] TI816X: clock: Add clock data
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH 1/4] TI816X: prcm: Add module and register offsets
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH/RFC 13/19] OMAP2+: voltage: keep track of powerdomains in each voltagedomain
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH/RFC 12/19] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH/RFC 10/19] OMAP3: powerdomain data: add voltage domains
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH/RFC 08/19] OMAP2+: powerdomain: add voltagedomain to struct powerdomain
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH/RFC 04/19] OMAP2+: voltage: start towards a new voltagedomain layer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/4] iommu: Prevent oops in iommu_get() and while arch_iommu is in use
  • From: David Cohen <dacohen@xxxxxxxxx>
• RE: [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: "K, Mythri P" <mythripk@xxxxxx>
• [PATCH 1/4] omap iommu: Check existence of arch_iommu
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] omap iommu: Prevent iommu implementations from being unloaded while in use
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] omap iommu: Add module information to struct iommu_functions
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] omap2 iommu: Set module information in omap2_iommu_ops
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] iommu: Prevent oops in iommu_get() and while arch_iommu is in use
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] iommu: Prevent oops in iommu_get() and while arch_iommu is in use
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [PATCH 2/6] arm: mach-omap2: smartreflex: fix sr_late_init() error path in probe
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH/RFC 00/19] OMAP: voltage layer cleanup and restructure
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: OMAP 3430 Camera/ISP out of memory error
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH/RFC 01/19] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP2+: VC: add SoC-specific op for PMIC register addresses
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or missing MAC addresses for eth0 and wlan0
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: OMAP 3430 Camera/ISP out of memory error
  • From: Patrick Radius <info@xxxxxxxxxxx>
• OMAP 3430 Camera/ISP out of memory error
  • From: Patrick Radius <info@xxxxxxxxxxx>
• Re: 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• RE: [PATCH] OMAP2+: VC: add SoC-specific op for PMIC register addresses
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH/RFC 14/19] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 13/19] OMAP2+: voltage: keep track of powerdomains in each voltagedomain
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 12/19] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 10/19] OMAP3: powerdomain data: add voltage domains
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 08/19] OMAP2+: powerdomain: add voltagedomain to struct powerdomain
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 06/19] OMAP3: voltagedomain data: add wakeup domain
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 04/19] OMAP2+: voltage: start towards a new voltagedomain layer
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 01/19] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 00/19] OMAP: voltage layer cleanup and restructure
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• RE: [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or missing MAC addresses for eth0 and wlan0
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: "Avinash.H.M." <avinashhm@xxxxxx>
• RE: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: "Avinash.H.M." <avinashhm@xxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• Re: [PATCH 2/6] arm: mach-omap2: smartreflex: fix sr_late_init() error path in probe
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] OMAP2+: VC: add SoC-specific op for PMIC register addresses
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] OMAP2+: VC: begin spliting out SoC specifics; start with i2c slave addr
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH/RFC 00/19] OMAP: voltage layer cleanup and restructure
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or missing MAC addresses for eth0 and wlan0
  • From: Andy Green <andy@xxxxxxxxxxx>
• [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper
  • From: Andy Green <andy@xxxxxxxxxxx>
• [RFC PATCH 0/2] OMAP2+: PANDA: Provide unique-ish MAC addresses for Ethernet and WLAN interfaces
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Corbin Simpson <mostawesomedude@xxxxxxxxx>
• Re: 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Updated mach-types update
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] OMAP2+: PM: omap device: API's for handling mstandby mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH/RFC 07/19] OMAP3: voltage: add scalable flag to voltagedomain
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH 2/6] arm: mach-omap2: smartreflex: fix sr_late_init() error path in probe
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 4/6] arm: mach-omap2: smartreflex: fix ioremap leak on probe error
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 6/6] arm: mach-omap2: smartreflex: delete debugfs entries on probe error
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 2/6] arm: mach-omap2: smartreflex: fix sr_late_init() error path in probe
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 3/6] arm: mach-omap2: smartreflex: request the memory region
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 5/6] arm: mach-omap2: smartreflex: delete instance from sr_list on probe error
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 1/6] arm: mach-omap2: omap_l3_smx: fix request_irq() error path
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH/RFC 07/19] OMAP3: voltage: add scalable flag to voltagedomain
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH/RFC 07/19] OMAP3: voltage: add scalable flag to voltagedomain
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• [PATCH 2/2 v2] usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 1/2 v2] usb: otg: OMAP4430: Fixing the omap4430_phy_init function
  • From: Hema HK <hemahk@xxxxxx>
• RE: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
  • From: Hema HK <hemahk@xxxxxx>
• 2.6.38 not booting on sbc8100 (aka devkit8000)
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [PATCH] OMAP: DSS2: DSI: Introduce sync_vc functions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAP: DSS2: DSI: Introduce sync_vc functions
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] OMAP: DSS2: DSI: Introduce sync_vc functions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH/RFC 07/19] OMAP3: voltage: add scalable flag to voltagedomain
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v3 1/4] OMAP2+: PM: omap device: API's for handling mstandby mode
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH v3 3/4] OMAP: PM: DMA: Enable runtime pm
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v3 1/4] OMAP2+: PM: omap device: API's for handling mstandby mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v3 2/4] OMAP2+: DMA: prevent races while setting M idle mode to nostandby
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v3 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v3 4/4] OMAP: DMA: Fix: context restore during off mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH/RFC 09/19] OMAP2: add voltage domains and connect to powerdomains
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 19/19] OMAP2+: VC: add SoC-specific op for PMIC register addresses
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 18/19] OMAP2+: VC: support PMICs with separate voltage and command registers
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 17/19] OMAP2+: voltage: VC: begin spliting out SoC specifics; start with i2c slave addr
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 16/19] OMAP2+: voltage: split out voltage processor (VP) code into new layer
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 15/19] OMAP2+: voltage: move VC into struct voltagedomain, misc. renames
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 14/19] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 13/19] OMAP2+: voltage: keep track of powerdomains in each voltagedomain
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 12/19] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 11/19] OMAP4: powerdomain data: add voltage domains
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 04/19] OMAP2+: voltage: start towards a new voltagedomain layer
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 10/19] OMAP3: powerdomain data: add voltage domains
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 08/19] OMAP2+: powerdomain: add voltagedomain to struct powerdomain
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 07/19] OMAP3: voltage: add scalable flag to voltagedomain
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 06/19] OMAP3: voltagedomain data: add wakeup domain
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 05/19] OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva"
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 03/19] OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 02/19] OMAP2+: voltage: move PRCM mod offets into VC/VP structures
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 01/19] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH/RFC 00/19] OMAP: voltage layer cleanup and restructure
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP4: clockdomain: Follow recommended enable sequence
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3] SoC Camera: add driver for OMAP1 camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH-v2.6.39] spi/omap_mcspi: Fix broken last word xfer
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH 5/8] staging: tidspbridge: send wake message even if dsp is running
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 7/8] staging: tidspbridge: remove redundant indentation in PM routines
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 8/8] staging: tidspbridge: protect critical sections on PM routines
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 4/8] staging: tidspbridge: send mbox PM command directly
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 6/8] staging: tidspbridge: remove redundant code from PM routines
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 3/8] staging: tidspbridge: remove msleep for dsp transition wait
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 2/8] staging: tidspbridge: fix resume path from retention
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 1/8] staging: tidspbridge: make wake_dsp to handle PM code
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 0/8] staging: tidspbridge: PM routines cleanup
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] OMAP2+: voltage: move PRCM mod offets into VDD structure
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v3] SoC Camera: add driver for OMAP1 camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH] OMAP: DSS2: DSI: Introduce sync_vc functions
  • From: archit@xxxxxx
• Re: [GIT PULL] omap display subsystem changes for 2.6.39
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Dave Airlie <airlied@xxxxxxxxx>
• Re: [PATCH 0/7] OMAP2+: voltage layer cleanup and restructure.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 7/7] OMAP3: powerdomain data: add voltage domains
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 5/7] OMAP2+: voltage: keep track of powerdomains in each voltagedomain
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/7] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/7] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 7/7] OMAP3: powerdomain data: add voltage domains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/7] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 7/7] OMAP3: powerdomain data: add voltage domains
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 4/7] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 5/7] OMAP2+: voltage: keep track of powerdomains in each voltagedomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 7/7] OMAP3: powerdomain data: add voltage domains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/7] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] omap display subsystem changes for 2.6.39
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [RFC PATCH] HDMI:Support for EDID parsing in kernel.
  • From: Mythri P K <mythripk@xxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Input: tca6416-keypad: Change to module_init()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH] omap3: am3517evm : Read MAC address from E-Fuses
  • From: Sriramakrishnan A G <srk@xxxxxx>
• Re: [PATCH 1/3] OMAP4: DSS2: Register configuration changes for DSI
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 1/3] OMAP4: DSS2: Register configuration changes for DSI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/3] OMAP4: DSS2: Register configuration changes for DSI
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
• RE: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 0/2] USB: twl4030-usb: fix isp1707 xceiver powering
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 1/2] USB: twl4030-usb: do board specific phy_power up/down
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: [RFC PATCHv4 0/7] HSI framework and drivers
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [PATCH 0/2] USB: twl4030-usb: fix isp1707 xceiver powering
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
• Re: [PATCH 1/2] USB: twl4030-usb: do board specific phy_power up/down
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: [RFC 3/3] OMAP3: omap_device: Add support to associate a device with an initiator
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH-v2.6.39] spi/omap_mcspi: Fix broken last word xfer
  • From: Michael Jones <michael.jones@xxxxxxxxxxxxxxxx>
• Re: [PATCH-v2.6.39] spi/omap_mcspi: Fix broken last word xfer
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• Re: [PATCH 06/13] omap: use list_move() instead of list_del()/list_add() combination
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [GIT PULL] omap display subsystem changes for 2.6.39
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [GIT PULL] omap display subsystem changes for 2.6.39
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• RE: cpufreq support for the Beagleboard.
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: cpufreq support for the Beagleboard.
  • From: Matt Johnson <johnso87@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [GIT PULL] omap display subsystem changes for 2.6.39
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [GIT PULL] omap display subsystem changes for 2.6.39
  • From: John S <john.schi15@xxxxxxxxx>
• Re: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/7] OMAP2+: voltage: move PRCM mod offets into VDD structure
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/7] OMAP2+: voltage: move PRCM mod offets into VDD structure
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: cpufreq support for the Beagleboard.
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH-v2.6.39] spi/omap_mcspi: Fix broken last word xfer
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 1/2] USB: twl4030-usb: do board specific phy_power up/down
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Problems with powermanagement (suspend/wake/shutdown) on OMAP3530.
  • From: Tasslehoff Kjappfot <tasskjapp@xxxxxxxxx>
• Re: cpufreq support for the Beagleboard.
  • From: javier Martin <javier.martin@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] USB: twl4030-usb: do board specific phy_power up/down
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 0/2] USB: twl4030-usb: fix isp1707 xceiver powering
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 2/2] OMAP3: rx51: specify phy_power for usb tranceiver
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• RE: cpufreq support for the Beagleboard.
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [RFC 3/3] OMAP3: omap_device: Add support to associate a device with an initiator
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• RE: [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [RFC 1/3] OMAP3: PRM: Add grpsel programming support
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: [GIT PULL] omap display subsystem changes for 2.6.39
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: cpufreq support for the Beagleboard.
  • From: javier Martin <javier.martin@xxxxxxxxxxxxxxxxx>
• [RFC 2/3] OMAP3: hwmod: Add support to associate an initiator with a hwmod
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 1/3] OMAP3: PRM: Add grpsel programming support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 3/3] OMAP3: omap_device: Add support to associate a device with an initiator
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 0/3] OMAP3: Support processor group selection by a peripheral
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: cpufreq support for the Beagleboard.
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCH 2/7] OMAP2+: voltage: move PRCM mod offets into VDD structure
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• cpufreq support for the Beagleboard.
  • From: javier Martin <javier.martin@xxxxxxxxxxxxxxxxx>
• [GIT PULL] omap display subsystem changes for 2.6.39
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAP4: clockdomain: Follow recommended enable sequence
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCHv4 0/7] HSI framework and drivers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Some issue about CA816x/819x EVM board
  • From: Xiao Jiang <jgq516@xxxxxxxxx>
• RE: [PATCH 2/7] OMAP2+: voltage: move PRCM mod offets into VDD structure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 4/4] OMAP: DMA: Fix: context restore during off mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [GIT PULL] OMAP PM updates for 2.6.39
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/7] OMAP3: powerdomain data: add voltage domains
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 6/7] OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 5/7] OMAP2+: voltage: keep track of powerdomains in each voltagedomain
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 4/7] OMAP2+: powerdomain: add voltage domain lookup during register
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 3/7] OMAP2+: voltage: start towards a new voltagedomain layer
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 2/7] OMAP2+: voltage: move PRCM mod offets into VDD structure
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 1/7] OMAP2+: hwmod: remove unused voltagedomain pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 0/7] OMAP2+: voltage layer cleanup and restructure.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP4: PandaBoard: remove unused power regulators
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: OMAP2+: gpmc warning fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Kernel Question
  • From: "Boswell, Patrick" <Patrick.Boswell@xxxxxxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper
  • From: Andy Green <andy@xxxxxxxxxxx>
• RE: [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] omap3: beaglexm: fix user button.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [RFC][PATCH 1/3] OMAP PM: Seggregate Voltage layer parameters
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH 1/2] omap3: voltage: remove unnecessary param passing
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH 2/2] omap3: voltage: fix variable type and name
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• FW: omap2+ voltage: Few queries
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap changes for v2.6.39 merge window
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 3/3] OMAP PM: Add Board specific parameters for OMAP Volatge layer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC][PATCH 1/3] OMAP PM: Seggregate Voltage layer parameters
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 0/2] [pm-wip/cpufreq] OMAP: CPUfreq cleanup and SMP support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP4: PM: remove redundant #ifdef CONFIG_PM
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Stephan Raue <mailinglists@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Stephan Raue <mailinglists@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] OMAP: DMA: Fix: context restore during off mode
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 7/7] OMAP: PM CONSTRAINTS: add power domains wake-up latency figures
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 6/7] OMAP: PM CONSTRAINTS: control power domains next state
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 5/7] OMAP: PM CONSTRAINTS: add a power domains state update function in hwmod
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 3/7] OMAP: PM CONSTRAINTS: implement wake-up latency constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Stephan Raue <mailinglists@xxxxxxxxxxx>
• RE: [RFCv2 2/2] AM35x: voltage: Basic initialization
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/2] omap3: voltage: fix variable type and name
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] omap3: voltage: remove unnecessary param passing
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 18/19] OMAP3630+: SR: add support for class 1.5
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 19/19] OMAP3430: SR: class3: restrict CPU to run on
  • From: Kevin Hilman <khilman@xxxxxx>
• [GIT PULL] omap changes for v2.6.39 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH V3 17/19] OMAP3+: SR: make enable path use volt_data pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 15/19] OMAP3+: SR: introduce notifier_control
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 14/19] OMAP3+: SR: introduce notifiers flags
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 13/19] OMAP3+: SR: Reuse sr_[start|stop]_vddautocomp functions
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 12/19] OMAP3+: SR: introduce class start,stop and priv data
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 10/19] OMAP3+: SR: enable/disable SR only on need
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 09/19] OMAP3+: SR: disable interrupt by default
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 08/19] OMAP3+: SR: make notify independent of class
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 07/19] OMAP3+: voltage: add transdone APIs
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 06/19] OMAP3+: voltage: use volt_data pointer instead values
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• [PATCH 3/3] ARM: OMAP4: correct GPMC IRQ number
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/3] ARM: OMAP2+: GPMC set dummy irq chip
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 1/3] ARM: OMAP2+: correct GPMC IRQ
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 0/3] ARM: OMAP2+: gpmc warning fixes
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/2] omap3: voltage: fix variable type and name
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 1/2] omap3: voltage: remove unnecessary param passing
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 0/2] omap2+: voltage: simple clean-ups
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH V3 04/19] OMAP3+: voltage: remove spurious pr_notice for debugfs
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 02/19] OMAP3+: voltage: fix build warning
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V3 01/19] OMAP3: hwmod: add SmartReflex IRQs
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP4: PandaBoard: remove unused power regulators
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap3: beaglexm: fix user button.
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] omap3: beaglexm: fix user button.
  • From: Javier Martin <javier.martin@xxxxxxxxxxxxxxxxx>
• Re: PM Questions
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH] OMAP4: PandaBoard: remove unused power regulators
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [RFCv2 2/2] AM35x: voltage: Basic initialization
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [RFCv2 2/2] AM35x: voltage: Basic initialization
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH 2/2] arm: mach-omap2: omap_l3_smx: fix irq handler setup
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Stephan Raue <mailinglists@xxxxxxxxxxx>
• Re: [PATCH RFC] n810 USB: Initialize USB-FS
  • From: Michael Büsch <mb@xxxxxxxxx>
• PM Questions
  • From: Marshall Crocker <maroc81@xxxxxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 2/2] arm: mach-omap2: omap_l3_smx: fix irq handler setup
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH] rtc-twl: Switch to using threaded irq
  • From: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
• Re: [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP4: PandaBoard: remove unused power regulators
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v2 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH 06/13] omap: use list_move() instead of list_del()/list_add() combination
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• RE: [RFCv2 2/2] AM35x: voltage: Basic initialization
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH] OMAP4: PandaBoard: remove unused power regulators
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type
  • From: Sanjeev Premi <premi@xxxxxx>
• RE: [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [RFCv2 2/2] AM35x: voltage: Basic initialization
  • From: Sanjeev Premi <premi@xxxxxx>
• [RFCv2 1/2] OMAP3: Add support for TPS65023 (AM35x only)
  • From: Sanjeev Premi <premi@xxxxxx>
• [RFCv2 0/2] Support TPS65023 with AM35x
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver
  • From: Andy Green <andy@xxxxxxxxxxx>
• RE: [HELP] Audio on BeagleBoard xM can't work
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [RFC][PATCH 2/3] OMAP PM: Add support for bypassing VP/VC in Voltage layer
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [RFC][PATCH 3/3] OMAP PM: Add Board specific parameters for OMAP Volatge layer
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [RFC][PATCH 0/3] OMAP PM: Voltage layer clean up
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 06/13] omap: use list_move() instead of list_del()/list_add() combination
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• Re: [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 2420 sDMA address mapping typo
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: 2420 sDMA address mapping typo
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: 2420 sDMA address mapping typo
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: Code for v2.6.39 merge window frozen, patches archived
  • From: <aaro.koskinen@xxxxxxxxx>
• Re: 2420 sDMA address mapping typo
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Question regarding suspend/resume
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 3 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 15/18] OMAP2+: hwmod data: add correct functionality flags to all omap2plus i2c dev_attr
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 10/18] I2C: OMAP2+: address confused probed version naming
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 08/18] I2C: OMAP2+: use platform_data ip revision to select register map
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 06/18] I2C: OMAP1: set IP revision in platform data
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 05/18] I2C: OMAP: add rev to omap i2c platform data
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 04/18] I2C: OMAP2+: hwmod data: Tag all OMAP2+ hwmod definitions with I2C IP revision
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 01/18] OMAP2+: hwmod data: Set hwmod flags to only allow 16-bit accesses to i2c
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver
  • From: Andy Green <andy@xxxxxxxxxxx>
• Question regarding suspend/resume
  • From: Peter Barada <peter.barada@xxxxxxxxx>
• Re: [PATCH] OMAP4: PandaBoard: remove unused power regulators
  • From: Andy Green <andy@xxxxxxxxxxx>
• [PATCH] OMAP4: PandaBoard: remove unused power regulators
  • From: David Anders <x0132446@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• 2420 sDMA address mapping typo
  • From: "Fillinger, Michael" <m-fillinger@xxxxxx>
• Re: [Security] [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: James Bottomley <James.Bottomley@xxxxxxx>
• RE: [HELP] Audio on BeagleBoard xM can't work
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [RFC][PATCH 2/3] OMAP PM: Add support for bypassing VP/VC in Voltage layer
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [Security] [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: Vasiliy Kulikov <segoon@xxxxxxxxxxxx>
• RE: [RFC][PATCH 0/3] OMAP PM: Voltage layer clean up
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [RFC][PATCH 3/3] OMAP PM: Add Board specific parameters for OMAP Volatge layer
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [RFC][PATCH 2/3] OMAP PM: Add support for bypassing VP/VC in Voltage layer
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [RFC][PATCH 0/3] OMAP PM: Voltage layer clean up
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v5 10/10] OMAP4 : HDMI : Add HDMI structure in the board file for OMAP4 PANDA
  • From: John S <john.schi15@xxxxxxxxx>
• [RFC][PATCH 3/3] OMAP PM: Add Board specific parameters for OMAP Volatge layer
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [RFC][PATCH 1/3] OMAP PM: Seggregate Voltage layer parameters
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [RFC][PATCH 2/3] OMAP PM: Add support for bypassing VP/VC in Voltage layer
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [RFC][PATCH 0/3] OMAP PM: Voltage layer clean up
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [Security] [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: James Bottomley <James.Bottomley@xxxxxxx>
• Re: [Security] [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Security] [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: James Bottomley <James.Bottomley@xxxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [HELP] Audio on BeagleBoard xM can't work
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v2] OMAP: DSS2: FEATURES: DSI PLL parameter cleanup
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAP: DSS2: FEATURES: Functions to return min and max values of parameters
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH 2/2] OMAP3: wdtimer: Fix CORE idle transition
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: DSS2: FEATURES: Fix usage of dss_reg_field and dss_clk_source_name
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [GIT PULL] OMAP PM updates for 2.6.39
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device.
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "K, Mythri P" <mythripk@xxxxxx>
• [PATCH v2] OMAP: DSS2: FEATURES: DSI PLL parameter cleanup
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH] OMAP: DSS2: FEATURES: Functions to return min and max values of parameters
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH] OMAP2PLUS: DSS2: FEATURES: Fix usage of dss_reg_field and dss_clk_source_name
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v5 10/10] OMAP4 : HDMI : Add HDMI structure in the board file for OMAP4 PANDA
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: GPIO chip select support in McSPI
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [HELP] Audio on BeagleBoard xM can't work
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [Security] [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Code for v2.6.39 merge window frozen, patches archived
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: James Bottomley <James.Bottomley@xxxxxxx>
• Re: GPIO chip select support in McSPI
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [Security] [PATCH 00/20] world-writable files in sysfs and debugfs
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] OMAP PM updates for 2.6.39
  • From: Stephan Raue <mailinglists@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP PM updates for 2.6.39
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP PM updates for 2.6.39
  • From: Stephan Raue <mailinglists@xxxxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• RE: [PATCH 2/2] OMAP3: wdtimer: Fix CORE idle transition
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Code for v2.6.39 merge window frozen, patches archived
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: GPIO chip select support in McSPI
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] omap: zoom: host should not pull up wl1271's irq line
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 3/5] OMAP2+:Common CPU DIE ID reading code reads wrong registers for OMAP4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver
  • From: Andy Green <andy@xxxxxxxxxxx>
• Re: [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] omap4: mux: Remove duplicate mux modes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v12 4/9] OMAP2+: dmtimer: convert to platform devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] omap4: mux: Remove duplicate mux modes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods
  • From: "Avinash.H.M." <avinashhm@xxxxxx>
• Re: [PATCH] staging: tidspbridge: protect dmm_map properly
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 0/2] power button repeat input events
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] power button repeat input events
  • From: Denis Karpov <ext-denis.2.karpov@xxxxxxxxx>
• [PATCH] omap: zoom: host should not pull up wl1271's irq line
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• RE: [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH 0/2] power button repeat input events
  • From: "Menon, Nishanth" <nm@xxxxxx>
• [PATCH v2 1/2] OMAP: cpufreq: Split OMAP1 and OMAP2PLUS CPUfreq drivers.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 2/2] OMAP2PLUS: cpufreq: Add SMP support to cater OMAP4430
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 0/2] [pm-wip/cpufreq] OMAP: CPUfreq cleanup and SMP support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/2] omap: rx51: initialize platform data for twl4030 powerbutton
  • From: Denis Karpov <ext-denis.2.karpov@xxxxxxxxx>
• Re: [PATCH 0/2] power button repeat input events
  • From: Denis Karpov <ext-denis.2.karpov@xxxxxxxxx>
• Re: [PATCH 2/2] omap: rx51: initialize platform data for twl4030 powerbutton
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH] OMAP4: clockdomain: Follow recommended enable sequence
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "Jan, Sebastien" <s-jan@xxxxxx>
• RE: [PATCH 2/2] OMAP3: wdtimer: Fix CORE idle transition
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH 1/3] omap2plus: clock: Add an alias cpu_ck to be used in common cpufreq driver
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/2] omap4: mux: Remove duplicate mux modes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH v12 6/9] dmtimer: switch-over to platform device driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• GPIO chip select support in McSPI
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>