Am 16.03.2011 11:53, schrieb K, Mythri P:
Hi Tomi,
On Wed, Mar 16, 2011 at 12:21 PM, Tomi Valkeinen<tomi.valkeinen@xxxxxx> wrote:
On Sun, 2011-03-13 at 11:20 -0500, Stephan Raue wrote:
Am 13.03.2011 15:32, schrieb Stephan Raue:
<snip>
i have tried this omap2plus defconfig now too, with some little
changes needed to boot my system (config:
http://paste.pocoo.org/show/352917/). Now i get this error (see also:
http://paste.pocoo.org/show/352915/)
[ 3.255065] omapdss HDMI: fallback to VGA
[ 3.271636] omapdss HDMI error: Failed to set PHY_PWR_STATUS
[ 3.277587] omapdss HDMI error: failed to power on device
[ 3.283325] omapdss error: failed to power on
[ 3.287902] omapfb omapfb: Failed to enable display 'hdmi'
[ 3.293853] Console: switching to colour dummy device 80x30
[ 3.304595] omapfb omapfb: failed to setup omapfb
[ 3.309539] omapfb: probe of omapfb failed with error -5
using omap2plus defconfig with my little changes i need to boot my
system i get the error above, also if i remove CONFIG_ARCH_OMAP2. but if
i remove CONFIG_ARCH_OMAP3 too i get the error i reported originally
(the kernel begins to boot, but crashes) (diff between omap2plus
defconfig without CONFIG_ARCH_OMAP2 and omap2plus defconfig without
CONFIG_ARCH_OMAP2, CONFIG_ARCH_OMAP3: http://paste.pocoo.org/show/352960/)
I'm currently traveling for this week so I have quite limited ability to
test this. Mythri still haven't been able to reproduce any of these
errors, right?
That's right i have not been able to reproduce the error. I have
tried with 4 Panda Boards with atleast 4 - 5 Montiors connected (
Also without connecting any monitor).
Anybody else there to test HDMI on Panda and/or Blaze? I pushed the
latest DSS + HDMI patches to a test branch for easier testing (I'll push
Panda DVI patches there also when I get the new version):
git://gitorious.org/linux-omap-dss2/linux.git test
Stephan,
It would be great if you could try out with this tree with omap2plus_defconfig.
Note : Please disable VENC , there is a known issue of kernel crash
with VENC enabled.
Thanks and regards,
Mythri.
Hi,
i tried this test tree with omap2plus_defconfig.
it seems the kernel crashes and poweroff the board on loading this hdmi
stuff, but dont print any crashlog. is there a way any backtraces will
be printed?
output from serial console: http://paste.pocoo.org/show/354850/
kernel config (omap2plus_defconfig, added squashfs support, added
support to include initramfs in kernel, build omapfb stuff statically
into the kernel): http://paste.pocoo.org/show/354853/
i am using a own toolchain to crosscompile with gcc-4.5.2, binutils-2.21...
Stephan
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
