Hi Tomi, On Wed, Mar 16, 2011 at 12:21 PM, Tomi Valkeinen <tomi.valkeinen@xxxxxx> wrote: > On Sun, 2011-03-13 at 11:20 -0500, Stephan Raue wrote: >> Am 13.03.2011 15:32, schrieb Stephan Raue: > > <snip> > >> > i have tried this omap2plus defconfig now too, with some little >> > changes needed to boot my system (config: >> > http://paste.pocoo.org/show/352917/). Now i get this error (see also: >> > http://paste.pocoo.org/show/352915/) >> > >> > [ 3.255065] omapdss HDMI: fallback to VGA >> > [ 3.271636] omapdss HDMI error: Failed to set PHY_PWR_STATUS >> > [ 3.277587] omapdss HDMI error: failed to power on device >> > [ 3.283325] omapdss error: failed to power on >> > [ 3.287902] omapfb omapfb: Failed to enable display 'hdmi' >> > [ 3.293853] Console: switching to colour dummy device 80x30 >> > [ 3.304595] omapfb omapfb: failed to setup omapfb >> > [ 3.309539] omapfb: probe of omapfb failed with error -5 >> >> using omap2plus defconfig with my little changes i need to boot my >> system i get the error above, also if i remove CONFIG_ARCH_OMAP2. but if >> i remove CONFIG_ARCH_OMAP3 too i get the error i reported originally >> (the kernel begins to boot, but crashes) (diff between omap2plus >> defconfig without CONFIG_ARCH_OMAP2 and omap2plus defconfig without >> CONFIG_ARCH_OMAP2, CONFIG_ARCH_OMAP3: http://paste.pocoo.org/show/352960/) > > I'm currently traveling for this week so I have quite limited ability to > test this. Mythri still haven't been able to reproduce any of these > errors, right? > That's right i have not been able to reproduce the error. I have tried with 4 Panda Boards with atleast 4 - 5 Montiors connected ( Also without connecting any monitor). > Anybody else there to test HDMI on Panda and/or Blaze? I pushed the > latest DSS + HDMI patches to a test branch for easier testing (I'll push > Panda DVI patches there also when I get the new version): > > git://gitorious.org/linux-omap-dss2/linux.git test Stephan, It would be great if you could try out with this tree with omap2plus_defconfig. Note : Please disable VENC , there is a known issue of kernel crash with VENC enabled. Thanks and regards, Mythri. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
