Am 12.03.2011 07:51, schrieb K, Mythri P:
Hi,
On Sat, Mar 12, 2011 at 12:12 AM, Stephan Raue<mailinglists@xxxxxxxxxxx> wrote:
Am 11.03.2011 19:27, schrieb Tomi Valkeinen:
On Fri, 2011-03-11 at 10:18 -0600, Stephan Raue wrote:
Am 11.03.2011 14:22, schrieb Tomi Valkeinen:
On Fri, 2011-03-11 at 02:43 -0600, Stephan Raue wrote:
Am 11.03.2011 08:12, schrieb Tomi Valkeinen:
On Thu, 2011-03-10 at 08:45 -0600, Stephan Raue wrote:
Hi,
if i try this patch series the boot stops after (seeing via serial
console):
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
without this patch series i can see the boot to th OS. I am using
this
patches on top of
http://gitorious.org/linux-omap-dss2/linux/commits/master
Do i anything wrong or do i use a wrong git repo (the patches apply
cleanly)? Her my kernel config: http://fpaste.org/9Esw/
Hmm, I cannot even compile the kernel with that config:
CC arch/arm/mach-omap2/io.o
In file included from arch/arm/mm/init.c:27:0:
/home/tomba/work/linux/arch/arm/include/asm/tlb.h: In function
'tlb_flush_mmu':
/home/tomba/work/linux/arch/arm/include/asm/tlb.h:104:3: error:
implicit declaration of function 'release_pages'
In file included from arch/arm/mm/init.c:27:0:
/home/tomba/work/linux/arch/arm/include/asm/tlb.h: In function
'tlb_remove_page':
/home/tomba/work/linux/arch/arm/include/asm/tlb.h:168:3: error:
implicit declaration of function 'page_cache_release'
make[1]: *** [arch/arm/mm/init.o] Error 1
make: *** [arch/arm/mm] Error 2
make: *** Waiting for unfinished jobs....
Tomi
please enable swap support or try:
http://ftp.arm.linux.org.uk/git/?p=linux-2.6-arm.git;a=commit;h=97594b0f35c0708cb9551c070b9693a52ec24ebf
which is fixed in 2.6.38-rc8
Ok. So you didn't have just my master branch and the HDMI patch set? I
see that the config you gave is for rc8, and mine is rc7, so I guess you
also merged rc8 into your tree?
Tomi
yes, you are right, i have tested this with different kernel configs and
both rc7 and rc8 with the same results.
Ok. I need to dig out my panda and try to get it running. Blaze board
seems to work fine, at least for me.
Does the crash happen every time?
Tomi
omap2plus_defconfig
yes, with all configs i tried. will try a "make omap2plus_defconfig" too and
let you know.
I have tried booting on Panda board and it works fine , I am using
OMAP2PLUS defconfig.
I have disabled VENC though( without that i see that kernel hangs , ie
because reading VENC register in hwmod probe is resulting in a crash.
i have tried this omap2plus defconfig now too, with some little changes
needed to boot my system (config: http://paste.pocoo.org/show/352917/).
Now i get this error (see also: http://paste.pocoo.org/show/352915/)
[ 3.255065] omapdss HDMI: fallback to VGA
[ 3.271636] omapdss HDMI error: Failed to set PHY_PWR_STATUS
[ 3.277587] omapdss HDMI error: failed to power on device
[ 3.283325] omapdss error: failed to power on
[ 3.287902] omapfb omapfb: Failed to enable display 'hdmi'
[ 3.293853] Console: switching to colour dummy device 80x30
[ 3.304595] omapfb omapfb: failed to setup omapfb
[ 3.309539] omapfb: probe of omapfb failed with error -5
thanks
Stephan
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
