On Sun, 2011-03-13 at 11:20 -0500, Stephan Raue wrote: > Am 13.03.2011 15:32, schrieb Stephan Raue: <snip> > > i have tried this omap2plus defconfig now too, with some little > > changes needed to boot my system (config: > > http://paste.pocoo.org/show/352917/). Now i get this error (see also: > > http://paste.pocoo.org/show/352915/) > > > > [ 3.255065] omapdss HDMI: fallback to VGA > > [ 3.271636] omapdss HDMI error: Failed to set PHY_PWR_STATUS > > [ 3.277587] omapdss HDMI error: failed to power on device > > [ 3.283325] omapdss error: failed to power on > > [ 3.287902] omapfb omapfb: Failed to enable display 'hdmi' > > [ 3.293853] Console: switching to colour dummy device 80x30 > > [ 3.304595] omapfb omapfb: failed to setup omapfb > > [ 3.309539] omapfb: probe of omapfb failed with error -5 > > using omap2plus defconfig with my little changes i need to boot my > system i get the error above, also if i remove CONFIG_ARCH_OMAP2. but if > i remove CONFIG_ARCH_OMAP3 too i get the error i reported originally > (the kernel begins to boot, but crashes) (diff between omap2plus > defconfig without CONFIG_ARCH_OMAP2 and omap2plus defconfig without > CONFIG_ARCH_OMAP2, CONFIG_ARCH_OMAP3: http://paste.pocoo.org/show/352960/) I'm currently traveling for this week so I have quite limited ability to test this. Mythri still haven't been able to reproduce any of these errors, right? Anybody else there to test HDMI on Panda and/or Blaze? I pushed the latest DSS + HDMI patches to a test branch for easier testing (I'll push Panda DVI patches there also when I get the new version): git://gitorious.org/linux-omap-dss2/linux.git test Tomi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
