> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Stephan Raue > Sent: Tuesday, March 15, 2011 1:21 AM > To: Tony Lindgren > Cc: Kevin Hilman; linux-omap@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx > Subject: Re: [GIT PULL] OMAP PM updates for 2.6.39 > > Am 14.03.2011 20:38, schrieb Tony Lindgren: > > * Stephan Raue<mailinglists@xxxxxxxxxxx> [110314 12:32]: > >> Hi, > >> > >> Am 11.03.2011 01:59, schrieb Kevin Hilman: > >>> Dave Martin (5): > >>> ARM: omap4: Provide do_wfi() for Thumb-2 > >>> ARM: omap4: Convert END() to ENDPROC() for correct > linkage with CONFIG_THUMB2_KERNEL > >>> ARM: omap3: Remove hand-encoded SMC instructions > >> "ARM: omap3: Remove hand-encoded SMC instructions" fails for me > with: > >> > >> /home/stephan/projects/openelec/build.OpenELEC-panda.arm- > devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc -Wp,- > MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem > /home/stephan/projects/openelec/build.OpenELEC-panda.arm- > devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include - > I/home/stephan/projects/openelec/build.OpenELEC-panda.arm- > devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -include > include/generated/autoconf.h -D__KERNEL__ -mlittle-endian - > Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include - > D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables > -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,- > mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h > -msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -o arch/arm/mach- > omap2/sleep34xx.o arch/arm/mach-omap2/sleep34xx.S > >> arch/arm/mach-omap2/sleep34xx.S: Assembler messages: > >> arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor > does not support ARM mode `smc #1' > >> arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor > does not support ARM mode `smc #1' > >> arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor > does not support ARM mode `smc #1' > >> arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor > does not support ARM mode `smc #0' > >> arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor > does not support ARM mode `smc #0' > >> arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor > does not support ARM mode `smc #0' > >> make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1 > >> make[1]: *** [arch/arm/mach-omap2] Error 2 > >> > >> > >> replacing in arch/arm/mach-omap2/Makefile: > >> > >> AFLAGS_sleep24xx.o :=-Wa,-march=armv6 > >> AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a > >> > >> to: > >> > >> AFLAGS_sleep24xx.o :=-Wa,-march=armv6 > >> AFLAGS_sleep34xx.o :=-Wa,-march=armv7- > a$(plus_sec) > >> > >> helps compiling (see also: > https://patchwork.kernel.org/patch/369681/) > > Care to post a patch for this and mention your compiler version > too? > > > > Tony > patch attached. > > i am using http://gitorious.org/linux-omap-dss2/linux with gcc- > 4.5.2, binutils-2.21 > Looks like I need to upgrade my gcc version. This is not seen with 4.3.3 Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
