On Thu, 24 Mar 2011 12:00:30 -0700 Tony Lindgren <tony@xxxxxxxxxxx> wrote: > * Belisko Marek <marek.belisko@xxxxxxxxx> [110324 08:18]: > > On Thu, Mar 24, 2011 at 4:18 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > > > > > * Belisko Marek <marek.belisko@xxxxxxxxx> [110324 02:50]: > > > > Hi, > > > > > > > > Try to run 2.6.38 on my sbc8100 > > > > (use mach-type for devkit8000 because boards are similar) board but > > > > when u-boot load it to ram I see just: ... > > > Can you enable DEBUG_LL and EARLY_PRINTK in your .config > > > and add earlyprintk to your cmdline? Then you should see > > > what goes wrong. > > > > > Forgot to mention. I already test this options but result is same like I > > report in > > first email. > > Maybe add some printk statements to start_kernel function in > init/main.c and see if you get any output? > For earlyprintk worth to check also arch/arm/plat-omap/include/plat/uncompress.h that there is entry for sbc8100 (double check with devkit8000 as there is entry for it and if you are re-using the mach-type). -- Jarkko -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
