On Thu, Mar 17, 2011 at 02:29:18PM -0700, Kevin Hilman wrote: > "G, Manjunath Kondaiah" <manjugk@xxxxxx> writes: > > > Patch series to support mstandby mode handling and enabling runtime PM > > support for DMA driver. > > I still have the same problems as with the previous revision: > > > This is still not runtime-suspending when I use my DMA test in linking > mode. > > If I put a large enough period between transfers, it should autosuspend > during transfers. It seems to do auto-suspend and resume once, but then > it never suspends again. > > I tested with my dmatest module[1], and loaded with: > > # insmod ./dmatest.ko linking=1 forever=1 forever_period=1024 > > Not only does it not auto-suspend between transfers (which I expected), > it also doesn't suspend after removing the module which stops all active > channels. Tested again on 2.6.38 with patches pulled from patchworks and for me, the same test case seems to be passing. Here is the log: http://pastebin.com/ccEmTZS5 The above test case is executed on blaze and same result is observed with other OMAP2+ boards also. Can you please let me know which board and code base you are using for testing so that I can try to replicate the same. -Manjunath > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
