Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: fake ACPI IDs in the drivers, (continued)
- [PATCH 0/1] iio: accel: kxcjk1013: Add tablet_mode sysfs file for exercising the KIOX010A ACPI DSM,
Hans de Goede
- [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible,
Hans de Goede
- [PATCH 1/3] iio: accel: bmc150: Improve ACPI enumeration support,
Hans de Goede
- [PATCH 1/1] iio: potentiometer: ad5272: Correct polarity of reset,
Phil Reid
- [PULL] First set of new device support, cleanups and yaml conversions for the 5.11 cycle.,
Jonathan Cameron
- [PATCH 1/2] dt-bindings: iio: dac: AD5766 yaml documentation,
Cristian Pop
- [PATCH 1/2] iio: cros_ec: do an early exit if not physical_device case,
Alexandru Ardelean
- [PATCH v6 0/5] Introduce the Counter character device interface,
William Breathitt Gray
- Message not available
- Re: [PATCH v6 0/5] Introduce the Counter character device interface, David Lechner
[PATCH v2 0/2] hts221: add vdd power regulator,
Lorenzo Bianconi
[PATCH v3] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer,
William Breathitt Gray
[PATCH v2] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer,
William Breathitt Gray
[PATCH 0/2] Make cb a required parameter of buffer-cb,
Nuno Sá
[PATCH v2] HID: mcp2221: add ADC support,
Matt Ranostay
[PATCH v2] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16,
Stephen Boyd
[PATCH 000/141] Fix fall-through warnings for Clang,
Gustavo A. R. Silva
Re: [PATCH 000/141] Fix fall-through warnings for Clang, Miguel Ojeda
Re: [PATCH 000/141] Fix fall-through warnings for Clang, Jason Gunthorpe
Message not available
Re: [PATCH 000/141] Fix fall-through warnings for Clang, Martin K. Petersen
Re: (subset) [PATCH 000/141] Fix fall-through warnings for Clang, Martin K. Petersen
[PATCH] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16,
Stephen Boyd
[PATCH] HID: mcp2221: add ADC support,
Matt Ranostay
[PATCH] iio: adc: ad7292: remove unneeded spi_set_drvdata(),
Alexandru Ardelean
[PATCH] iio: accel: adis16209: remove unneeded spi_set_drvdata(),
Alexandru Ardelean
[PATCH] iio: accel: adis16201: remove unneeded spi_set_drvdata(),
Alexandru Ardelean
[PATCH v2 1/4] iio: adc: ad7887: convert dual-channel mode to DT/ACPI,
Alexandru Ardelean
[PATCH v2 0/4] add custom hinge sensor support,
Ye Xiang
[PATCH 0/2] hts221: add vdd power regulator,
Lorenzo Bianconi
[PATCH 0/4] add custom hinge sensor support,
Ye Xiang
[PATCH v2 0/2] st_lsm6dsx: add vdd-vddio power regulator,
Lorenzo Bianconi
[RFC PATCH 00/12] iio: core,buffer: add support for multiple IIO buffers per IIO device,
Alexandru Ardelean
- [RFC PATCH 03/12] iio: buffer: rework buffer & scan_elements dir creation, Alexandru Ardelean
- [RFC PATCH 04/12] iio: buffer: add index to the first IIO buffer dir and symlink it back, Alexandru Ardelean
- [RFC PATCH 02/12] iio: buffer: add back-ref from iio_buffer to iio_dev, Alexandru Ardelean
- [RFC PATCH 08/12] iio: buffer: add helper to get the IIO device to which a buffer belongs, Alexandru Ardelean
- [RFC PATCH 09/12] iio: re-route all buffer attributes through new buffer kobj_type, Alexandru Ardelean
- [RFC PATCH 11/12] iio: buffer: introduce support for attaching more IIO buffers, Alexandru Ardelean
- [RFC PATCH 01/12] iio: core: register chardev only if needed, Alexandru Ardelean
- [RFC PATCH 07/12] iio: buffer: re-route core buffer attributes via it's new kobj_type, Alexandru Ardelean
- [RFC PATCH 05/12] iio: core: split __iio_device_attr_init() to init only the attr object, Alexandru Ardelean
- [RFC PATCH 12/12] iio: buffer: add ioctl() to support opening extra buffers for IIO device, Alexandru Ardelean
- [RFC PATCH 10/12] iio: core: wrap iio device & buffer into struct for character devices, Alexandru Ardelean
- [RFC PATCH 06/12] iio: buffer: re-route scan_elements via it's kobj_type, Alexandru Ardelean
- Re: [RFC PATCH 00/12] iio: core,buffer: add support for multiple IIO buffers per IIO device, Jonathan Cameron
[PATCH 0/2] st_lsm6dsx: add vdd-vddio power regulator,
Lorenzo Bianconi
[PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings,
Alexandre Belloni
- [PATCH v2 01/11] iio: adc: at91_adc: remove platform data, Alexandre Belloni
- [PATCH v2 02/11] iio: adc: at91_adc: rework resolution selection, Alexandre Belloni
- [PATCH v2 05/11] iio: adc: at91_adc: rework trigger definition, Alexandre Belloni
- [PATCH v2 04/11] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt, Alexandre Belloni
- [PATCH v2 03/11] dt-bindings:iio:adc:remove atmel,adc-res and atmel,adc-res-names, Alexandre Belloni
- [PATCH v2 09/11] ARM: dts: at91: sama5d3: use proper ADC compatible, Alexandre Belloni
- [PATCH v2 11/11] ARM: dts: at91: remove deprecated ADC properties, Alexandre Belloni
- [PATCH v2 10/11] ARM: dts: at91: at91sam9rl: fix ADC triggers, Alexandre Belloni
- [PATCH v2 08/11] iio: adc: at91_adc: remove forward declaration, Alexandre Belloni
- [PATCH v2 07/11] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe, Alexandre Belloni
- [PATCH v2 06/11] dt-bindings:iio:adc:remove triggers, Alexandre Belloni
- Re: [PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings, Jonathan Cameron
[PATCH v2] iio: accel: yamaha-yas: Add DT bindings,
Linus Walleij
[PATCH v2 1/2] iio: hrtimer-trigger: Mark hrtimer to expire in hard interrupt context,
Lars-Peter Clausen
[PATCH] iio: core: organize buffer file-ops in the order defined in the struct, Alexandru Ardelean
[PATCH] iio: core: return -EINVAL when no ioctl handler has been run,
Alexandru Ardelean
[PATCH 1/3] iio: adc: ad7887: convert dual-channel mode to DT/ACPI,
Alexandru Ardelean
[PULL] First set of IIO and counter fixes for the 5.10 cycle.,
Jonathan Cameron
[PATCH] MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer,
William Breathitt Gray
[PATCH] iio: accel: yamaha-yas: Add DT bindings, Linus Walleij
[PATCH 1/3 v3] iio: accel: bmc150-accel: Add DT bindings,
Linus Walleij
[PATCH 0/9] dt-bindings: IIO: Drop wrong use of io-channel-ranges then drop it as well.,
Jonathan Cameron
- [PATCH 1/9] dt-bindings:iio:qcom-spmi-vadc drop incorrect io-channel-ranges from example, Jonathan Cameron
- [PATCH 2/9] dt-bindings:iio:samsung,exynos-adc: drop missuse of io-channel-ranges, Jonathan Cameron
- [PATCH 3/9] ARM: dts: Cygnus: Drop incorrect io-channel-ranges property., Jonathan Cameron
- [PATCH 4/9] ARM: dts: exynos: Drop incorrect use of io-channel-ranges, Jonathan Cameron
- [PATCH 5/9] ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property., Jonathan Cameron
- [PATCH 6/9] ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges, Jonathan Cameron
- [PATCH 7/9] ARM: dts: s5pv210-aries: Drop unneeded io-channel-ranges property., Jonathan Cameron
- [PATCH 8/9] arm64: dts: exynos: Drop incorrect use of io-channel-ranges property., Jonathan Cameron
- [RFC PATCH 9/9] iio: inkern: Drop io-channel-ranges dt property support, Jonathan Cameron
[PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread,
Lorenzo Bianconi
[PATCH v2] counter: microchip-tcb-capture: Fix CMR value check,
William Breathitt Gray
[PATCH v3] iio: imu: st_lsm6dsx: fix edge-trigger interrupts,
Lorenzo Bianconi
[PATCH 1/2] iio: core: Consolidate iio_format_avail_{list,range}(),
Lars-Peter Clausen
[PATCH 0/9] iio: adc: at91_adc: cleanup DT bindings,
Alexandre Belloni
- [PATCH 1/9] iio: adc: at91_adc: remove platform data, Alexandre Belloni
- [PATCH 6/9] iio: adc: at91_adc: remove forward declaration, Alexandre Belloni
- [PATCH 4/9] iio: adc: at91_adc: rework trigger definition, Alexandre Belloni
- [PATCH 2/9] iio: adc: at91_adc: rework resolution selection, Alexandre Belloni
- [PATCH 8/9] ARM: dts: at91: sama5d3: use proper ADC compatible, Alexandre Belloni
- [PATCH 5/9] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe, Alexandre Belloni
- [PATCH 7/9] iio: adc: at91_adc: use devm_input_allocate_device, Alexandre Belloni
- [PATCH 3/9] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt, Alexandre Belloni
- [PATCH 9/9] ARM: dts: at91: remove deprecated ADC properties, Alexandre Belloni
- Re: [PATCH 0/9] iio: adc: at91_adc: cleanup DT bindings, Jonathan Cameron
- Re: [PATCH 0/9] iio: adc: at91_adc: cleanup DT bindings, Ludovic Desroches
[RFC PATCH 0/1] Adding support for IIO SCMI based sensors,
Jyoti Bhayana
[PATCH] iio: adc: ad7887: convert probe to device-managed functions,
Alexandru Ardelean
[PATCH 1/3 v2] iio: accel: bmc150-accel: Add DT bindings,
Linus Walleij
[RFC PATCH 0/1] Sanity check buffer callback,
Nuno Sá
[PATCH] iio: buffer: Fix demux update,
Nuno Sá
[PATCH] counter: microchip-tcb-capture: Fix CMR value check,
William Breathitt Gray
[PATCH bugfix for 5.10 0/2] iio: accel: kxcjk1013: Fix kbd/touchpad not working on some 2-in-1s,
Hans de Goede
[PATCH] MAINTAINERS: Fix 'W:' prefix in Invensense IMU entry,
Jonathan Neuschäfer
[PATCH] docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI,
Fabrice Gasnier
[PATCH] iio: adc: stm32-adc: adapt clock duty cycle for proper operation,
Fabrice Gasnier
Counter device Interface for reading out input capture,
Ahmad Fatoum
[PATCH] iio: adc: stm32-adc: dma transfers cleanup,
Olivier Moysan
[PATCH] iio/adc: ingenic: Fix battery VREF for JZ4770 SoC,
Paul Cercueil
[PATCH] iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used,
Paul Cercueil
[PATCH v3] MAINTAINERS: add Dan Murphy as TI LP8xxx drivers maintainer,
Krzysztof Kozlowski
[PATCH v2] iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume,
Qinglang Miao
[PATCH] HID: hid-sensor-hub: Fix issue with devices with no report ID,
Pablo Ceballos
[PATCH] iio: light: fix kconfig dependency bug for VCNL4035,
Necip Fazil Yildiran
[PATCH v2] iio: imu: st_lsm6dsx: fix edge-trigger interrupts,
Lorenzo Bianconi
[PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring,
Dmitry Baryshkov
- [PATCH v9 01/15] dt-bindings: thermal: qcom: add adc-thermal monitor bindings, Dmitry Baryshkov
- [PATCH v9 02/15] fixp-arith: add a linear interpolation function, Dmitry Baryshkov
- [PATCH v9 03/15] iio: adc: qcom-vadc: move several adc5 functions to common file, Dmitry Baryshkov
- [PATCH v9 04/15] iio: adc: qcom-vadc-common: use fixp_linear_interpolate, Dmitry Baryshkov
- [PATCH v9 05/15] iio: adc: move qcom-vadc-common.h to include dir, Dmitry Baryshkov
- [PATCH v9 06/15] iio: adc: qcom-spmi-adc5: use of_device_get_match_data, Dmitry Baryshkov
- [PATCH v9 07/15] iio: provide of_iio_channel_get_by_name() and devm_ version it, Dmitry Baryshkov
- [PATCH v9 08/15] iio: adc: move vadc_map_pt from header to the source file, Dmitry Baryshkov
- [PATCH v9 09/15] iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation, Dmitry Baryshkov
- [PATCH v9 10/15] iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp, Dmitry Baryshkov
- [PATCH v9 11/15] iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb, Dmitry Baryshkov
- [PATCH v9 12/15] thermal: qcom: add support for adc-tm5 PMIC thermal monitor, Dmitry Baryshkov
- [PATCH v9 13/15] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part, Dmitry Baryshkov
- [PATCH v9 14/15] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5, Dmitry Baryshkov
- [PATCH v9 15/15] arm64: dts: qrb5165-rb5: port thermal zone definitions, Dmitry Baryshkov
- Re: [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring, Daniel Lezcano
[PATCH v2 0/4] iio: adc: xilinx: use even more devres,
Bartosz Golaszewski
[PATCH 1/1] iio: industrialio-trigger: Use 'gnu_printf' format notation,
Lee Jones
[PATCH] iio: afe: iio-rescale: Support processed channels,
Linus Walleij
[PATCH v2] iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout,
Lorenzo Bianconi
[PATCH 1/3] iio: accel: bmc150-accel: Add DT bindings,
Linus Walleij
[PATCH 00/46] dt-bindings:iio: yet more txt to yam conversions,
Jonathan Cameron
- [PATCH 01/46] dt-bindings:iio:resolver:adi,ad2s90: Conversion of binding to yaml., Jonathan Cameron
- [PATCH 02/46] dt-bindings:iio:potentiometer:adi,ad5272 yaml conversion, Jonathan Cameron
- [PATCH 03/46] dt-bindings:iio:potentiometer:microchip,mcp4131 txt to yaml conversion, Jonathan Cameron
- [PATCH 04/46] dt-bindings:iio:potentiometer:microchip,mcp41010 txt to yaml conversion, Jonathan Cameron
- [PATCH 05/46] dt-bindings:iio:impedance-analyzer:adi,ad5933 yaml conversion., Jonathan Cameron
- [PATCH 06/46] dt-bindings:iio:samsung,sensorhub-rinato: yaml conversion, Jonathan Cameron
- [PATCH 07/46] dt-bindings:iio:health:ti,afe4403: txt to yaml binding, Jonathan Cameron
- [PATCH 08/46] dt-bindings:iio:health:ti,afe4404: txt to yaml conversion, Jonathan Cameron
- [PATCH 09/46] dt-bindings:iio:health:maxim,max30100: txt to yaml conversion, Jonathan Cameron
- [PATCH 10/46] dt-bindings:iio:health:maxim,max30102: txt to yaml conversion, Jonathan Cameron
- [PATCH 11/46] dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion, Jonathan Cameron
- [PATCH 12/46] dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion, Jonathan Cameron
- [PATCH 13/46] dt-bindings:iio:light:avago,apds9300: txt to yaml conversion., Jonathan Cameron
- [PATCH 14/46] dt-bindings:iio:light:avago,apds9960: txt to yaml conversion, Jonathan Cameron
- [PATCH 15/46] dt-bindings:iio:light:capella,cm36651: txt to yaml conversion., Jonathan Cameron
- [PATCH 16/46] dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion., Jonathan Cameron
- [PATCH 17/46] dt-bindings:iio:light:maxim,max44009: txt to yaml conversion., Jonathan Cameron
- [PATCH 18/46] dt-bindings:iio:light:ti,opt3001: txt to yaml conversion, Jonathan Cameron
- [PATCH 19/46] dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion., Jonathan Cameron
- [PATCH 20/46] dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor, Jonathan Cameron
- [PATCH 21/46] dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion, Jonathan Cameron
- [PATCH 22/46] dt-bindings:iio:light:st,vl6180: txt to yaml format conversion., Jonathan Cameron
- [PATCH 23/46] dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion, Jonathan Cameron
- [PATCH 24/46] dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion, Jonathan Cameron
- [PATCH 25/46] dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion., Jonathan Cameron
- [PATCH 26/46] dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion, Jonathan Cameron
- [PATCH 27/46] dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion., Jonathan Cameron
- [PATCH 28/46] dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion, Jonathan Cameron
- [PATCH 29/46] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt, Jonathan Cameron
- [PATCH 30/46] dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion., Jonathan Cameron
- [PATCH 31/46] dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion, Jonathan Cameron
- [PATCH 32/46] dt-bindings:iio:adc:brcm,iproc-static-adc: txt to yaml conversion, Jonathan Cameron
- [PATCH 33/46] dt-bindings:iio:adc:mediatek,mt2701-auxadc: rename and yaml conversion., Jonathan Cameron
- [PATCH 34/46] dt-bindings:iio:adc:ti,palmas-gpadc: txt to yaml format conversion., Jonathan Cameron
- [PATCH 36/46] dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion., Jonathan Cameron
- [PATCH 37/46] dt-binding:iio:adc:ti,ads124s08: txt to yaml format conversion., Jonathan Cameron
- [PATCH 35/46] dt-bindings:iio:adc:qcom,pm8018-adc: yaml conversion and rename., Jonathan Cameron
- [PATCH 38/46] dt-bindings:iio:dac:ad5592r: txt to yaml format conversion., Jonathan Cameron
- [PATCH 39/46] dt-bindings:iio:dac:ad5755: txt to yaml format conversion., Jonathan Cameron
- [PATCH 40/46] dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion., Jonathan Cameron
- [PATCH 41/46] dt-bindings:iio:accel:kionix,kxcjk1013: txt to yaml format conversion., Jonathan Cameron
- [PATCH 42/46] dt-bindings:iio:accel:fsl,mma8452: txt to yaml conversion., Jonathan Cameron
- [PATCH 43/46] dt-bindings:iio:gyro:bosch,bmg180: txt to yaml format conversion., Jonathan Cameron
- [PATCH 44/46] dt-bindings:iio:st,st-sensors: txt to yaml conversion., Jonathan Cameron
- [PATCH 46/46] dt-bindings:iio:temperature: Drop generic binding file., Jonathan Cameron
- [PATCH 45/46] dt-bindings:iio:frequency:adi,adf4350: txt to yaml format conversion., Jonathan Cameron
- Re: [PATCH 00/46] dt-bindings:iio: yet more txt to yam conversions, Rob Herring
[PATCH 0/7] dt-bindings:iio: Move to trivial-devices.yaml from txt files.,
Jonathan Cameron
[PATCH 3/7] dt-bindings:iio:potentiometer:maxim,ds1803 move to trivial devices., Jonathan Cameron
[PATCH 4/7] dt-bindings:iio:potentiometer:maxim,max5481 move to trivial devices, Jonathan Cameron
[PATCH 5/7] dt-bindings:iio:light:renesas,isl29501: Move to trivial devices., Jonathan Cameron
[PATCH 6/7] dt-bindings:iio:magnetometer:memsic,mmc35240: move to trivial-devices.yaml, Jonathan Cameron
[PATCH 7/7] dt-bindings:iio:accel:domintech,dmard06: Move to trivial-devices.yaml, Jonathan Cameron
Re: [PATCH 0/7] dt-bindings:iio: Move to trivial-devices.yaml from txt files., Rob Herring
[PATCH 0/3] dt-bindings:iio:adc: Convert generic ADC channel binding to yaml,
Jonathan Cameron
[PATCH 0/3] dt-bindings: yaml conversion of i2c-gate and IIO users,
Jonathan Cameron
[PATCH 00/10] dt-bindings: iio: conversion of consumer drivers,
Jonathan Cameron
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]