On Fri, 2 Apr 2021 20:14:04 +0000 "Song Bao Hua (Barry Song)" <song.bao.hua@xxxxxxxxxxxxx> wrote: > > -----Original Message----- > > From: Jonathan Cameron [mailto:jic23@xxxxxxxxxx] > > Sent: Saturday, April 3, 2021 7:46 AM > > To: linux-iio@xxxxxxxxxxxxxxx > > Cc: Song Bao Hua (Barry Song) <song.bao.hua@xxxxxxxxxxxxx>; Jonathan Cameron > > <jonathan.cameron@xxxxxxxxxx>; Tomasz Duszynski > > <tomasz.duszynski@xxxxxxxxxxx> > > Subject: [PATCH 5/7] iio:chemical:scd30: Use IRQF_NO_AUTOEN to avoid irq request > > then disable > > > > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > > > This new flag cleanly avoids the need for a dance where we request the > > interrupt only to immediately disabling it by ensuring it is not > > auto-enabled in the first place. > > > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > Cc: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx> > > --- > > Reviewed-by: Barry Song <song.bao.hua@xxxxxxxxxxxxx> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to poke at it. Whilst they are doing that, any additional feedback welcomed. Thanks, Jonathan > > > drivers/iio/chemical/scd30_core.c | 16 ++++++++-------- > > 1 file changed, 8 insertions(+), 8 deletions(-) > > > > diff --git a/drivers/iio/chemical/scd30_core.c > > b/drivers/iio/chemical/scd30_core.c > > index 261c277ac4a5..d89f117dd0ef 100644 > > --- a/drivers/iio/chemical/scd30_core.c > > +++ b/drivers/iio/chemical/scd30_core.c > > @@ -655,19 +655,19 @@ static int scd30_setup_trigger(struct iio_dev *indio_dev) > > > > indio_dev->trig = iio_trigger_get(trig); > > > > + /* > > + * Interrupt is enabled just before taking a fresh measurement > > + * and disabled afterwards. This means we need to ensure it is not > > + * enabled here to keep calls to enable/disable balanced. > > + */ > > ret = devm_request_threaded_irq(dev, state->irq, scd30_irq_handler, > > - scd30_irq_thread_handler, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, > > + scd30_irq_thread_handler, > > + IRQF_TRIGGER_HIGH | IRQF_ONESHOT | > > + IRQF_NO_AUTOEN, > > indio_dev->name, indio_dev); > > if (ret) > > dev_err(dev, "failed to request irq\n"); > > > > - /* > > - * Interrupt is enabled just before taking a fresh measurement > > - * and disabled afterwards. This means we need to disable it here > > - * to keep calls to enable/disable balanced. > > - */ > > - disable_irq(state->irq); > > - > > return ret; > > } > > > > -- > > 2.31.1 >
