This change provides ARM SCMI Protocol based IIO device. This driver provides support for Accelerometer and Gyroscope using SCMI Sensor Protocol extensions added in the SCMIv3.0 ARM specification Reported-by: kernel test robot <lkp@xxxxxxxxx> Signed-off-by: Jyoti Bhayana <jbhayana@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210212172235.507028-2-jbhayana@xxxxxxxxxx Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> --- MAINTAINERS | 6 + drivers/firmware/arm_scmi/driver.c | 2 +- drivers/iio/common/Kconfig | 1 + drivers/iio/common/Makefile | 1 + drivers/iio/common/scmi_sensors/Kconfig | 18 + drivers/iio/common/scmi_sensors/Makefile | 5 + drivers/iio/common/scmi_sensors/scmi_iio.c | 683 +++++++++++++++++++++ 7 files changed, 715 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/common/scmi_sensors/Kconfig create mode 100644 drivers/iio/common/scmi_sensors/Makefile create mode 100644 drivers/iio/common/scmi_sensors/scmi_iio.c diff --git a/MAINTAINERS b/MAINTAINERS index d92f85ca831d..14227980f3d2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8692,6 +8692,12 @@ S: Maintained F: Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt F: drivers/iio/multiplexer/iio-mux.c +IIO SCMI BASED DRIVER +M: Jyoti Bhayana <jbhayana@xxxxxxxxxx> +L: linux-iio@xxxxxxxxxxxxxxx +S: Maintained +F: drivers/iio/common/scmi_sensors/scmi_iio.c + IIO SUBSYSTEM AND DRIVERS M: Jonathan Cameron <jic23@xxxxxxxxxx> R: Lars-Peter Clausen <lars@xxxxxxxxxx> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index cacdf1589b10..3e748e57deab 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -741,7 +741,7 @@ static struct scmi_prot_devnames devnames[] = { { SCMI_PROTOCOL_SYSTEM, { "syspower" },}, { SCMI_PROTOCOL_PERF, { "cpufreq" },}, { SCMI_PROTOCOL_CLOCK, { "clocks" },}, - { SCMI_PROTOCOL_SENSOR, { "hwmon" },}, + { SCMI_PROTOCOL_SENSOR, { "hwmon", "iiodev" },}, { SCMI_PROTOCOL_RESET, { "reset" },}, { SCMI_PROTOCOL_VOLTAGE, { "regulator" },}, }; diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig index 2b9ee9161abd..0334b4954773 100644 --- a/drivers/iio/common/Kconfig +++ b/drivers/iio/common/Kconfig @@ -6,5 +6,6 @@ source "drivers/iio/common/cros_ec_sensors/Kconfig" source "drivers/iio/common/hid-sensors/Kconfig" source "drivers/iio/common/ms_sensors/Kconfig" +source "drivers/iio/common/scmi_sensors/Kconfig" source "drivers/iio/common/ssp_sensors/Kconfig" source "drivers/iio/common/st_sensors/Kconfig" diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile index 4bc30bb548e2..fad40e1e1718 100644 --- a/drivers/iio/common/Makefile +++ b/drivers/iio/common/Makefile @@ -11,5 +11,6 @@ obj-y += cros_ec_sensors/ obj-y += hid-sensors/ obj-y += ms_sensors/ +obj-y += scmi_sensors/ obj-y += ssp_sensors/ obj-y += st_sensors/ diff --git a/drivers/iio/common/scmi_sensors/Kconfig b/drivers/iio/common/scmi_sensors/Kconfig new file mode 100644 index 000000000000..67e084cbb1ab --- /dev/null +++ b/drivers/iio/common/scmi_sensors/Kconfig @@ -0,0 +1,18 @@ +# +# IIO over SCMI +# +# When adding new entries keep the list in alphabetical order + +menu "IIO SCMI Sensors" + +config IIO_SCMI + tristate "IIO SCMI" + depends on ARM_SCMI_PROTOCOL + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Say yes here to build support for IIO SCMI Driver. + This provides ARM SCMI Protocol based IIO device. + This driver provides support for accelerometer and gyroscope + sensors available on SCMI based platforms. +endmenu diff --git a/drivers/iio/common/scmi_sensors/Makefile b/drivers/iio/common/scmi_sensors/Makefile new file mode 100644 index 000000000000..f13140a2575a --- /dev/null +++ b/drivers/iio/common/scmi_sensors/Makefile @@ -0,0 +1,5 @@ +# SPDX - License - Identifier : GPL - 2.0 - only +# +# Makefile for the IIO over SCMI +# +obj-$(CONFIG_IIO_SCMI) += scmi_iio.o diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c new file mode 100644 index 000000000000..872d87ca6256 --- /dev/null +++ b/drivers/iio/common/scmi_sensors/scmi_iio.c @@ -0,0 +1,683 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * System Control and Management Interface(SCMI) based IIO sensor driver + * + * Copyright (C) 2021 Google LLC + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/sysfs.h> +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/scmi_protocol.h> +#include <linux/time.h> +#include <linux/types.h> + +#define SCMI_IIO_NUM_OF_AXIS 3 + +struct scmi_iio_priv { + struct scmi_handle *handle; + const struct scmi_sensor_info *sensor_info; + struct iio_dev *indio_dev; + /* adding one additional channel for timestamp */ + s64 iio_buf[SCMI_IIO_NUM_OF_AXIS + 1]; + struct notifier_block sensor_update_nb; + u32 *freq_avail; +}; + +static int scmi_iio_sensor_update_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct scmi_sensor_update_report *sensor_update = data; + struct iio_dev *scmi_iio_dev; + struct scmi_iio_priv *sensor; + s8 tstamp_scale; + u64 time, time_ns; + int i; + + if (sensor_update->readings_count == 0) + return NOTIFY_DONE; + + sensor = container_of(nb, struct scmi_iio_priv, sensor_update_nb); + + for (i = 0; i < sensor_update->readings_count; i++) + sensor->iio_buf[i] = sensor_update->readings[i].value; + + if (!sensor->sensor_info->timestamped) { + time_ns = ktime_to_ns(sensor_update->timestamp); + } else { + /* + * All the axes are supposed to have the same value for timestamp. + * We are just using the values from the Axis 0 here. + */ + time = sensor_update->readings[0].timestamp; + + /* + * Timestamp returned by SCMI is in seconds and is equal to + * time * power-of-10 multiplier(tstamp_scale) seconds. + * Converting the timestamp to nanoseconds below. + */ + tstamp_scale = sensor->sensor_info->tstamp_scale + + const_ilog2(NSEC_PER_SEC) / const_ilog2(10); + if (tstamp_scale < 0) { + do_div(time, int_pow(10, abs(tstamp_scale))); + time_ns = time; + } else { + time_ns = time * int_pow(10, tstamp_scale); + } + } + + scmi_iio_dev = sensor->indio_dev; + iio_push_to_buffers_with_timestamp(scmi_iio_dev, sensor->iio_buf, + time_ns); + return NOTIFY_OK; +} + +static int scmi_iio_buffer_preenable(struct iio_dev *iio_dev) +{ + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + u32 sensor_id = sensor->sensor_info->id; + u32 sensor_config = 0; + int err; + + if (sensor->sensor_info->timestamped) + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, + SCMI_SENS_CFG_TSTAMP_ENABLE); + + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, + SCMI_SENS_CFG_SENSOR_ENABLE); + + err = sensor->handle->notify_ops->register_event_notifier(sensor->handle, + SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE, + &sensor_id, &sensor->sensor_update_nb); + if (err) { + dev_err(&iio_dev->dev, + "Error in registering sensor update notifier for sensor %s err %d", + sensor->sensor_info->name, err); + return err; + } + + err = sensor->handle->sensor_ops->config_set(sensor->handle, + sensor->sensor_info->id, sensor_config); + if (err) { + sensor->handle->notify_ops->unregister_event_notifier(sensor->handle, + SCMI_PROTOCOL_SENSOR, + SCMI_EVENT_SENSOR_UPDATE, &sensor_id, + &sensor->sensor_update_nb); + dev_err(&iio_dev->dev, "Error in enabling sensor %s err %d", + sensor->sensor_info->name, err); + } + + return err; +} + +static int scmi_iio_buffer_postdisable(struct iio_dev *iio_dev) +{ + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + u32 sensor_id = sensor->sensor_info->id; + u32 sensor_config = 0; + int err; + + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, + SCMI_SENS_CFG_SENSOR_DISABLE); + + err = sensor->handle->notify_ops->unregister_event_notifier(sensor->handle, + SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE, + &sensor_id, &sensor->sensor_update_nb); + if (err) { + dev_err(&iio_dev->dev, + "Error in unregistering sensor update notifier for sensor %s err %d", + sensor->sensor_info->name, err); + return err; + } + + err = sensor->handle->sensor_ops->config_set(sensor->handle, sensor_id, + sensor_config); + if (err) { + dev_err(&iio_dev->dev, + "Error in disabling sensor %s with err %d", + sensor->sensor_info->name, err); + } + + return err; +} + +static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = { + .preenable = scmi_iio_buffer_preenable, + .postdisable = scmi_iio_buffer_postdisable, +}; + +static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) +{ + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + const unsigned long UHZ_PER_HZ = 1000000UL; + u64 sec, mult, uHz, sf; + u32 sensor_config; + char buf[32]; + + int err = sensor->handle->sensor_ops->config_get(sensor->handle, + sensor->sensor_info->id, &sensor_config); + if (err) { + dev_err(&iio_dev->dev, + "Error in getting sensor config for sensor %s err %d", + sensor->sensor_info->name, err); + return err; + } + + uHz = val * UHZ_PER_HZ + val2; + + /* + * The seconds field in the sensor interval in SCMI is 16 bits long + * Therefore seconds = 1/Hz <= 0xFFFF. As floating point calculations are + * discouraged in the kernel driver code, to calculate the scale factor (sf) + * (1* 1000000 * sf)/uHz <= 0xFFFF. Therefore, sf <= (uHz * 0xFFFF)/1000000 + * To calculate the multiplier,we convert the sf into char string and + * count the number of characters + */ + sf = (u64)uHz * 0xFFFF; + do_div(sf, UHZ_PER_HZ); + mult = scnprintf(buf, sizeof(buf), "%llu", sf) - 1; + + sec = int_pow(10, mult) * UHZ_PER_HZ; + do_div(sec, uHz); + if (sec == 0) { + dev_err(&iio_dev->dev, + "Trying to set invalid sensor update value for sensor %s", + sensor->sensor_info->name); + return -EINVAL; + } + + sensor_config &= ~SCMI_SENS_CFG_UPDATE_SECS_MASK; + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_SECS_MASK, sec); + sensor_config &= ~SCMI_SENS_CFG_UPDATE_EXP_MASK; + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_EXP_MASK, -mult); + + if (sensor->sensor_info->timestamped) { + sensor_config &= ~SCMI_SENS_CFG_TSTAMP_ENABLED_MASK; + sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, + SCMI_SENS_CFG_TSTAMP_ENABLE); + } + + sensor_config &= ~SCMI_SENS_CFG_ROUND_MASK; + sensor_config |= + FIELD_PREP(SCMI_SENS_CFG_ROUND_MASK, SCMI_SENS_CFG_ROUND_AUTO); + + err = sensor->handle->sensor_ops->config_set(sensor->handle, + sensor->sensor_info->id, sensor_config); + if (err) + dev_err(&iio_dev->dev, + "Error in setting sensor update interval for sensor %s value %u err %d", + sensor->sensor_info->name, sensor_config, err); + + return err; +} + +static int scmi_iio_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + int err; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&iio_dev->mlock); + err = scmi_iio_set_odr_val(iio_dev, val, val2); + mutex_unlock(&iio_dev->mlock); + return err; + default: + return -EINVAL; + } +} + +static int scmi_iio_read_avail(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = sensor->freq_avail; + *type = IIO_VAL_INT_PLUS_MICRO; + *length = sensor->sensor_info->intervals.count * 2; + if (sensor->sensor_info->intervals.segmented) + return IIO_AVAIL_RANGE; + else + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static void convert_ns_to_freq(u64 interval_ns, u64 *hz, u64 *uhz) +{ + u64 rem, freq; + + freq = NSEC_PER_SEC; + rem = do_div(freq, interval_ns); + *hz = freq; + *uhz = rem * 1000000UL; + do_div(*uhz, interval_ns); +} + +static int scmi_iio_get_odr_val(struct iio_dev *iio_dev, int *val, int *val2) +{ + u64 sensor_update_interval, sensor_interval_mult, hz, uhz; + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + u32 sensor_config; + int mult; + + int err = sensor->handle->sensor_ops->config_get(sensor->handle, + sensor->sensor_info->id, &sensor_config); + if (err) { + dev_err(&iio_dev->dev, + "Error in getting sensor config for sensor %s err %d", + sensor->sensor_info->name, err); + return err; + } + + sensor_update_interval = + SCMI_SENS_CFG_GET_UPDATE_SECS(sensor_config) * NSEC_PER_SEC; + + mult = SCMI_SENS_CFG_GET_UPDATE_EXP(sensor_config); + if (mult < 0) { + sensor_interval_mult = int_pow(10, abs(mult)); + do_div(sensor_update_interval, sensor_interval_mult); + } else { + sensor_interval_mult = int_pow(10, mult); + sensor_update_interval = + sensor_update_interval * sensor_interval_mult; + } + + convert_ns_to_freq(sensor_update_interval, &hz, &uhz); + *val = hz; + *val2 = uhz; + return 0; +} + +static int scmi_iio_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *ch, int *val, + int *val2, long mask) +{ + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + s8 scale; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + scale = sensor->sensor_info->axis[ch->scan_index].scale; + if (scale < 0) { + *val = 1; + *val2 = int_pow(10, abs(scale)); + return IIO_VAL_FRACTIONAL; + } + *val = int_pow(10, scale); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = scmi_iio_get_odr_val(iio_dev, val, val2); + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info scmi_iio_info = { + .read_raw = scmi_iio_read_raw, + .read_avail = scmi_iio_read_avail, + .write_raw = scmi_iio_write_raw, +}; + +static ssize_t scmi_iio_get_raw_available(struct iio_dev *iio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + u64 resolution, rem; + s64 min_range, max_range; + s8 exponent, scale; + int len = 0; + + /* + * All the axes are supposed to have the same value for range and resolution. + * We are just using the values from the Axis 0 here. + */ + if (sensor->sensor_info->axis[0].extended_attrs) { + min_range = sensor->sensor_info->axis[0].attrs.min_range; + max_range = sensor->sensor_info->axis[0].attrs.max_range; + resolution = sensor->sensor_info->axis[0].resolution; + exponent = sensor->sensor_info->axis[0].exponent; + scale = sensor->sensor_info->axis[0].scale; + + /* + * To provide the raw value for the resolution to the userspace, + * need to divide the resolution exponent by the sensor scale + */ + exponent = exponent - scale; + if (exponent < 0) { + rem = do_div(resolution, + int_pow(10, abs(exponent)) + ); + len = scnprintf(buf, PAGE_SIZE, + "[%lld %llu.%llu %lld]\n", min_range, + resolution, rem, max_range); + } else { + resolution = resolution * int_pow(10, exponent); + len = scnprintf(buf, PAGE_SIZE, "[%lld %llu %lld]\n", + min_range, resolution, max_range); + } + } + return len; +} + +static const struct iio_chan_spec_ext_info scmi_iio_ext_info[] = { + { + .name = "raw_available", + .read = scmi_iio_get_raw_available, + .shared = IIO_SHARED_BY_TYPE, + }, + {}, +}; + +static void scmi_iio_set_timestamp_channel(struct iio_chan_spec *iio_chan, + int scan_index) +{ + iio_chan->type = IIO_TIMESTAMP; + iio_chan->channel = -1; + iio_chan->scan_index = scan_index; + iio_chan->scan_type.sign = 'u'; + iio_chan->scan_type.realbits = 64; + iio_chan->scan_type.storagebits = 64; +} + +static void scmi_iio_set_data_channel(struct iio_chan_spec *iio_chan, + enum iio_chan_type type, + enum iio_modifier mod, int scan_index) +{ + iio_chan->type = type; + iio_chan->modified = 1; + iio_chan->channel2 = mod; + iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_SCALE); + iio_chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ); + iio_chan->info_mask_shared_by_type_available = + BIT(IIO_CHAN_INFO_SAMP_FREQ); + iio_chan->scan_index = scan_index; + iio_chan->scan_type.sign = 's'; + iio_chan->scan_type.realbits = 64; + iio_chan->scan_type.storagebits = 64; + iio_chan->scan_type.endianness = IIO_LE; + iio_chan->ext_info = scmi_iio_ext_info; +} + +static int scmi_iio_get_chan_modifier(const char *name, + enum iio_modifier *modifier) +{ + char *pch, mod; + + if (!name) + return -EINVAL; + + pch = strrchr(name, '_'); + if (!pch) + return -EINVAL; + + mod = *(pch + 1); + switch (mod) { + case 'X': + *modifier = IIO_MOD_X; + return 0; + case 'Y': + *modifier = IIO_MOD_Y; + return 0; + case 'Z': + *modifier = IIO_MOD_Z; + return 0; + default: + return -EINVAL; + } +} + +static int scmi_iio_get_chan_type(u8 scmi_type, enum iio_chan_type *iio_type) +{ + switch (scmi_type) { + case METERS_SEC_SQUARED: + *iio_type = IIO_ACCEL; + return 0; + case RADIANS_SEC: + *iio_type = IIO_ANGL_VEL; + return 0; + default: + return -EINVAL; + } +} + +static u64 scmi_iio_convert_interval_to_ns(u32 val) +{ + u64 sensor_update_interval = + SCMI_SENS_INTVL_GET_SECS(val) * NSEC_PER_SEC; + u64 sensor_interval_mult; + int mult; + + mult = SCMI_SENS_INTVL_GET_EXP(val); + if (mult < 0) { + sensor_interval_mult = int_pow(10, abs(mult)); + do_div(sensor_update_interval, sensor_interval_mult); + } else { + sensor_interval_mult = int_pow(10, mult); + sensor_update_interval = + sensor_update_interval * sensor_interval_mult; + } + return sensor_update_interval; +} + +static int scmi_iio_set_sampling_freq_avail(struct iio_dev *iio_dev) +{ + u64 cur_interval_ns, low_interval_ns, high_interval_ns, step_size_ns, + hz, uhz; + unsigned int cur_interval, low_interval, high_interval, step_size; + struct scmi_iio_priv *sensor = iio_priv(iio_dev); + int i; + + sensor->freq_avail = + devm_kzalloc(&iio_dev->dev, + sizeof(*sensor->freq_avail) * + (sensor->sensor_info->intervals.count * 2), + GFP_KERNEL); + if (!sensor->freq_avail) + return -ENOMEM; + + if (sensor->sensor_info->intervals.segmented) { + low_interval = sensor->sensor_info->intervals + .desc[SCMI_SENS_INTVL_SEGMENT_LOW]; + low_interval_ns = scmi_iio_convert_interval_to_ns(low_interval); + convert_ns_to_freq(low_interval_ns, &hz, &uhz); + sensor->freq_avail[0] = hz; + sensor->freq_avail[1] = uhz; + + step_size = sensor->sensor_info->intervals + .desc[SCMI_SENS_INTVL_SEGMENT_STEP]; + step_size_ns = scmi_iio_convert_interval_to_ns(step_size); + convert_ns_to_freq(step_size_ns, &hz, &uhz); + sensor->freq_avail[2] = hz; + sensor->freq_avail[3] = uhz; + + high_interval = sensor->sensor_info->intervals + .desc[SCMI_SENS_INTVL_SEGMENT_HIGH]; + high_interval_ns = + scmi_iio_convert_interval_to_ns(high_interval); + convert_ns_to_freq(high_interval_ns, &hz, &uhz); + sensor->freq_avail[4] = hz; + sensor->freq_avail[5] = uhz; + } else { + for (i = 0; i < sensor->sensor_info->intervals.count; i++) { + cur_interval = sensor->sensor_info->intervals.desc[i]; + cur_interval_ns = + scmi_iio_convert_interval_to_ns(cur_interval); + convert_ns_to_freq(cur_interval_ns, &hz, &uhz); + sensor->freq_avail[i * 2] = hz; + sensor->freq_avail[i * 2 + 1] = uhz; + } + } + return 0; +} + +static int scmi_iio_buffers_setup(struct iio_dev *scmi_iiodev) +{ + struct iio_buffer *buffer; + + buffer = devm_iio_kfifo_allocate(&scmi_iiodev->dev); + if (!buffer) + return -ENOMEM; + + iio_device_attach_buffer(scmi_iiodev, buffer); + scmi_iiodev->modes |= INDIO_BUFFER_SOFTWARE; + scmi_iiodev->setup_ops = &scmi_iio_buffer_ops; + return 0; +} + +static struct iio_dev *scmi_alloc_iiodev(struct device *dev, + struct scmi_handle *handle, + const struct scmi_sensor_info *sensor_info) +{ + struct iio_chan_spec *iio_channels; + struct scmi_iio_priv *sensor; + enum iio_modifier modifier; + enum iio_chan_type type; + struct iio_dev *iiodev; + int i, ret; + + iiodev = devm_iio_device_alloc(dev, sizeof(*sensor)); + if (!iiodev) + return ERR_PTR(-ENOMEM); + + iiodev->modes = INDIO_DIRECT_MODE; + iiodev->dev.parent = dev; + sensor = iio_priv(iiodev); + sensor->handle = handle; + sensor->sensor_info = sensor_info; + sensor->sensor_update_nb.notifier_call = scmi_iio_sensor_update_cb; + sensor->indio_dev = iiodev; + + /* adding one additional channel for timestamp */ + iiodev->num_channels = sensor_info->num_axis + 1; + iiodev->name = sensor_info->name; + iiodev->info = &scmi_iio_info; + + iio_channels = + devm_kzalloc(dev, + sizeof(*iio_channels) * (iiodev->num_channels), + GFP_KERNEL); + if (!iio_channels) + return ERR_PTR(-ENOMEM); + + ret = scmi_iio_set_sampling_freq_avail(iiodev); + if (ret < 0) + return ERR_PTR(ret); + + for (i = 0; i < sensor_info->num_axis; i++) { + ret = scmi_iio_get_chan_type(sensor_info->axis[i].type, &type); + if (ret < 0) + return ERR_PTR(ret); + + ret = scmi_iio_get_chan_modifier(sensor_info->axis[i].name, + &modifier); + if (ret < 0) + return ERR_PTR(ret); + + scmi_iio_set_data_channel(&iio_channels[i], type, modifier, + sensor_info->axis[i].id); + } + + scmi_iio_set_timestamp_channel(&iio_channels[i], i); + iiodev->channels = iio_channels; + return iiodev; +} + +static int scmi_iio_dev_probe(struct scmi_device *sdev) +{ + const struct scmi_sensor_info *sensor_info; + struct scmi_handle *handle = sdev->handle; + struct device *dev = &sdev->dev; + struct iio_dev *scmi_iio_dev; + u16 nr_sensors; + int err = -ENODEV, i; + + if (!handle || !handle->sensor_ops) { + dev_err(dev, "SCMI device has no sensor interface\n"); + return -EINVAL; + } + + nr_sensors = handle->sensor_ops->count_get(handle); + if (!nr_sensors) { + dev_dbg(dev, "0 sensors found via SCMI bus\n"); + return -ENODEV; + } + + for (i = 0; i < nr_sensors; i++) { + sensor_info = handle->sensor_ops->info_get(handle, i); + if (!sensor_info) { + dev_err(dev, "SCMI sensor %d has missing info\n", i); + return -EINVAL; + } + + /* This driver only supports 3-axis accel and gyro, skipping other sensors */ + if (sensor_info->num_axis != SCMI_IIO_NUM_OF_AXIS) + continue; + + /* This driver only supports 3-axis accel and gyro, skipping other sensors */ + if (sensor_info->axis[0].type != METERS_SEC_SQUARED && + sensor_info->axis[0].type != RADIANS_SEC) + continue; + + scmi_iio_dev = scmi_alloc_iiodev(dev, handle, sensor_info); + if (IS_ERR(scmi_iio_dev)) { + dev_err(dev, + "failed to allocate IIO device for sensor %s: %ld\n", + sensor_info->name, PTR_ERR(scmi_iio_dev)); + return PTR_ERR(scmi_iio_dev); + } + + err = scmi_iio_buffers_setup(scmi_iio_dev); + if (err < 0) { + dev_err(dev, + "IIO buffer setup error at sensor %s: %d\n", + sensor_info->name, err); + return err; + } + + err = devm_iio_device_register(dev, scmi_iio_dev); + if (err) { + dev_err(dev, + "IIO device registration failed at sensor %s: %d\n", + sensor_info->name, err); + return err; + } + } + return err; +} + +static const struct scmi_device_id scmi_id_table[] = { + { SCMI_PROTOCOL_SENSOR, "iiodev" }, + {}, +}; + +MODULE_DEVICE_TABLE(scmi, scmi_id_table); + +static struct scmi_driver scmi_iiodev_driver = { + .name = "scmi-sensor-iiodev", + .probe = scmi_iio_dev_probe, + .id_table = scmi_id_table, +}; + +module_scmi_driver(scmi_iiodev_driver); + +MODULE_AUTHOR("Jyoti Bhayana <jbhayana@xxxxxxxxxx>"); +MODULE_DESCRIPTION("SCMI IIO Driver"); +MODULE_LICENSE("GPL v2"); -- 2.30.1.766.gb4fecdf3b7-goog
