Linux IIO Development

• Thread Index

• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: iio: light: vishay,veml6075: add vishay,veml6070
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/7] iio: backend: add API for interface get
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• RE: [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• RE: [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH v6 0/5] Enable eQEP DT support for Sitara K3 platforms
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH 7/7] iio: light: veml6070: use dev_err_probe in probe function
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 6/7] iio: light: veml6070: add devicetree support
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 5/7] dt-bindings: iio: light: vishay,veml6075: add vishay,veml6070
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 4/7] iio: light: veml6070: add support for a regulator
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 3/7] iio: light: veml6070: use device managed iio_device_register
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/7] iio: light: veml6070: use guard to handle mutex
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/7] iio: light: veml6070: add action for i2c_unregister_device
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/7] iio: light: veml6070: update code to current IIO best practices
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] iio: imu: bmi270: Add spi driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 06/10] iio: light: veml6030: use read_avail() for available attributes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: pressure: bmp280: Use char instead of s32 for data buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: pressure: bmp280: Fix type for raw values
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH] iio: pressure: sdp500: Add missing select CRC8
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] iio: pressure: sdp500: Add missing select CRC8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: pressure: sdp500: Add missing select CRC8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: pressure: bmp280: Use char instead of s32 for data buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: pressure: bmp280: Fix type for raw values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5770r: Convert to get_unaligned_le16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6360-adc: Converted to use get_unaligned_be16()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bmi270: Add spi driver for bmi270 imu
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/10] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/10] iio: adc: ad7606: Add iio-backend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/10] iio: adc: ad7606: Fix typo in the driver name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/10] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/10] iio: adc: ad7606: Add PWM support for conversion trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/10] Documentation: iio: Document ad7606 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: adc: ad7606: Make corrections on spi conditions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: adc: ad7606: Set the correct polarity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 10/10] iio: backend: adi-axi-dac: add registering of child fdt node
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 09/10] iio: dac: ad3552r: add axi platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 08/10] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 06/10] iio: backend: adi-axi-dac: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/2] iio: pressure: bmp280: Use char instead of s32 for data buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 1/2] iio: pressure: bmp280: Fix type for raw values
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 0/2]: pressure: bmp280: Improve pushing of data to buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 05/10] iio: backend: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/5] Enable eQEP DT support for Sitara K3 platforms
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: iio: dac: axi-dac: add ad3552r axi variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/10] iio: backend: adi-axi-dac: fix wrong register bitfield
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 0/2] iio: core: remove iio_validate_own_trigger() function
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH RFC v1 2/2] iio: light: rpr0521: Drop unnecessary checks for timestamp value
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2] tools/counter: Close fd when exit
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v6 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] Documentation: ABI: testing: ad485x: add ABI docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: backend: add support for data size set
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/7] iio: backend: add API for interface get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: Fix typos in comments across various files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: ltrf216a: Document device name for compatible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add support of IAM-20680 HP & HT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: pac1921: add ACPI support for pac1921
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/4] iio: adc: use scoped device_for_each_childe_node()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/10] iio: light: veml6030: add support for veml6035
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/10] iio: light: veml6030: power off device in probe error paths
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/10] iio: light: veml6030: drop processed info for white channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/10] iio: light: veml6030: use read_avail() for available attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: dac: ad5770r: Convert to get_unaligned_le16
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v2 02/10] iio: light: veml6030: add set up delay after any power on sequence
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] iio: light: veml6030: fix ALS sensor resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: mt6360-adc: Converted to use get_unaligned_be16()
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: light: opt3001: add missing full-scale range value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1119: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: ltr390: Replaced mask values with GENMASK()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Threshold event and Sampling freq support for LTR390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: light: ltr390: Interrupts and threshold event support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: light: ltr390: Suspend and Resume support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1363: Convert to get_unaligned_be16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pac1921: remove unnecessary explicit casts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: Fix alignment warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: bmi323: Fix some bugs in suspend resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: adxl355: Correct the typo 'accelaration'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC v1 2/2] iio: light: rpr0521: Drop unnecessary checks for timestamp value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC v1 1/2] iio: light: rpr0521: Use generic iio_pollfunc_store_time()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: acpi-als: Use elvis operator to simplify if statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 0/2] iio: core: remove iio_validate_own_trigger() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/8] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: light: veml6030: add support for veml6035
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: light: veml6030: update sensor resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: imu: smi240: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: also allow meson8-saradc to have amlogic,hhi-sysctrl property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmi323: Drop CONFIG_PM guards around runtime functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: adi,ad56xx: Fix duplicate compatible strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] iio: imu: bmi270: Add spi driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH v2 04/10] dt-bindings: iio: light: veml6030: add vdd-supply property
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: pac1921: add ACPI support for pac1921
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH 3/4] iio: adc: sun20i-gpadc: use scoped device_for_each_child_node()
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• [PATCH 4/4] iio: adc: ad5755: use scoped device_for_each_child_node()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 3/4] iio: adc: sun20i-gpadc: use scoped device_for_each_child_node()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/4] iio: adc: qcom-spmi-vadc: use scoped device_for_each_child_node()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/4] iio: adc: qcom-pm8xxx-xoadc: use scoped device_for_each_child_node()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/4] iio: adc: use scoped device_for_each_childe_node()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• RE: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v6 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v6 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v6 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v6 0/3] add support for ad777x family
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• Re: [PATCH 1/7] iio: backend: add API for interface get
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/7] iio: backend: add support for data size set
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/7] iio: adc: adi-axi-adc: set data format
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: Fix typos in comments across various files
  • From: Yu Jiaoliang <11172850@xxxxxxxx>
• Re: [PATCH 1/7] iio: backend: add API for interface get
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: Fix typos in comments across various files
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1] iio: adc: Fix typos in comments across various files
  • From: Yu Jiaoliang <yujiaoliang@xxxxxxxx>
• [PATCH v2 2/2] iio: proximity: hx9023s: Add performance tuning function
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v2 0/2] iio: proximity: hx9023s: Add performance tuning function
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: adc: ad7606: Make corrections on spi conditions
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v1] iio: adc: pac1921: add ACPI support for pac1921
  • From: <victor.duicu@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] iio: backend: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 07/10] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: iio: adc: add ad458x
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 2/5] arm64: dts: ti: k3-am62a-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v6 5/5] arm64: dts: ti: k3-am64x-sk: Enable eQEP
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v6 1/5] arm64: dts: ti: k3-am62-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v6 3/5] arm64: dts: ti: k3-am62p-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v6 0/5] Enable eQEP DT support for Sitara K3 platforms
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v6 4/5] arm64: dts: ti: k3-am64-main: Add eQEP nodes
  • From: Judith Mendez <jm@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 07/10] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: adc: ad7606: Make corrections on spi conditions
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: adc: ad7606: Make corrections on spi conditions
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v1] HID: Fix typo in the comment
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: iio: adc: add ad458x
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v1] HID: Fix typo in the comment
  • From: Yan Zhen <yanzhen@xxxxxxxx>
• Re: [PATCH v2 04/10] dt-bindings: iio: light: veml6030: add vdd-supply property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v7 1/8] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: iio: adc: add ad458x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 0/2] Add support of IAM-20680 HP & HT
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: inv_mpu6050: add support for IAM-20680HT/HP
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• Re: [PATCH v7 1/8] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: light: ltrf216a: Document device name for compatible
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v8 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH 7/7] Documentation: ABI: testing: ad485x: add ABI docs
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: backend: add support for data size set
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH 0/7] *** Add support for AD485x DAS Family ***
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH 7/7] Documentation: ABI: testing: ad485x: add ABI docs
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 5/7] dt-bindings: iio: adc: add ad458x
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 4/7] iio: adc: adi-axi-adc: set data format
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 3/7] iio: adc: adi-axi-adc: add interface type
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 2/7] iio: backend: add support for data size set
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 1/7] iio: backend: add API for interface get
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 0/7] *** Add support for AD485x DAS Family ***
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v2 09/10] iio: adc: ad7606: Add iio-backend support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 10/10] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] iio: proximity: hx9023s: Add performance tuning function
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH 0/2] iio: proximity: hx9023s: Add performance tuning function
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v2 10/10] iio: light: veml6030: add support for veml6035
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 09/10] dt-bindings: iio: light: veml6030: add veml6035
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 08/10] iio: light: veml6030: power off device in probe error paths
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 07/10] iio: light: veml6030: drop processed info for white channel
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 06/10] iio: light: veml6030: use read_avail() for available attributes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 05/10] iio: light: veml6030: add support for a regulator
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 04/10] dt-bindings: iio: light: veml6030: add vdd-supply property
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 03/10] iio: light: veml6030: use dev_err_probe()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 02/10] iio: light: veml6030: add set up delay after any power on sequence
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 01/10] iio: light: veml6030: fix ALS sensor resolution
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 00/10] iio: light: veml6030: fix issues and add support for veml6035
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 03/10] dt-bindings: iio: dac: ad3552r: fix maximum spi speed
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: iio: dac: axi-dac: add ad3552r axi variant
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH RFC v1 2/2] iio: light: rpr0521: Drop unnecessary checks for timestamp value
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH RFC v1 1/2] iio: light: rpr0521: Use generic iio_pollfunc_store_time()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH RFC v1 0/2] iio: Simplify IRQ and trigger management in RPR0521
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 1/1] iio: acpi-als: Use elvis operator to simplify if statement
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 0/1] iio: Remove assignment to pf->timestamp by using elvis
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH 2/3] iio: accel: adxl355: Correct the typo 'accelaration'
  • From: WangYuli <wangyuli@xxxxxxxxxxxxx>
• Re: [PATCH v1 0/2] iio: core: remove iio_validate_own_trigger() function
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 0/2] iio: core: remove iio_validate_own_trigger() function
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: Drop usage of iio_validate_own_trigger()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: Drop usage of iio_validate_own_trigger()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: iio: adc: ad7606: Add iio backend bindings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: adc: ad7606: Make corrections on spi conditions
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 0/2] iio: core: remove iio_validate_own_trigger() function
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 0/2] iio: core: remove iio_validate_own_trigger() function
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v1 2/2] iio: remove iio_validate_own_trigger() completely
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 1/2] iio: Drop usage of iio_validate_own_trigger()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 0/2] iio: core: remove iio_validate_own_trigger() function
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: adc: ad7606: Set the correct polarity
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: adc: max1363: Convert to get_unaligned_be16
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v2 09/10] iio: adc: ad7606: Add iio-backend support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 10/10] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 08/10] iio: adc: ad7606: Fix typo in the driver name
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 07/10] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 06/10] iio: adc: ad7606: Add PWM support for conversion trigger
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 04/10] Documentation: iio: Document ad7606 driver
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 05/10] iio: adc: ad7606: Sort includes in alphabetical order
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 03/10] dt-bindings: iio: adc: ad7606: Add iio backend bindings
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: iio: adc: ad7606: Make corrections on spi conditions
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: iio: adc: ad7606: Set the correct polarity
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 00/10] Add iio backend compatibility for ad7606
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1119: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  • From: João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
• [PATCH] iio: adc: ti-ads1119: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] iio: imu: inv_mpu6050: add support for IAM-20680HT/HP
  • From: inv.git-commit@xxxxxxx
• [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: inv.git-commit@xxxxxxx
• [PATCH 0/2] Add support of IAM-20680 HP & HT
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• RE: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v3 06/10] iio: backend: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 05/10] iio: backend: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: iio: dac: axi-dac: add ad3552r axi variant
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 01/10] iio: backend: adi-axi-dac: fix wrong register bitfield
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] iio: imu: inv_mpu6050: add support for IAM-20680HT/HP
  • From: inv.git-commit@xxxxxxx
• [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Add iam20680ht/hp bindings to mpu6050
  • From: inv.git-commit@xxxxxxx
• [PATCH 0/2] Add support of IAM-20680 HP & HT
  • From: inv.git-commit@xxxxxxx
• [PATCH v7 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 7/8] dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 5/8] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 4/8] iio: adc: ad7606: wrap channel ranges & scales into struct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 3/8] iio: adc: ad7606: move scale_setup as function pointer on chip-info
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 2/8] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 1/8] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v7 0/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 10/10] iio: backend: adi-axi-dac: add registering of child fdt node
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 09/10] iio: dac: ad3552r: add axi platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 08/10] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 07/10] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 06/10] iio: backend: adi-axi-dac: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 05/10] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: iio: dac: ad3552r: fix maximum spi speed
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: iio: dac: axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 01/10] iio: backend: adi-axi-dac: fix wrong register bitfield
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v3 00/10] iio: add support for the ad3552r AXI DAC IP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH] staging: iio: Fix alignment warning
  • From: Steven Davis <goldside000@xxxxxxxxxxx>
• Re: iio: pressure: bmp280: Use char instead of s32 for data buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v7 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH] staging: iio: Fix alignment warning
  • From: Hridesh MG <hridesh699@xxxxxxxxx>
• RE: [PATCH v7 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: "Shen Jianping (ME-SE/EAD2)" <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v7 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH v7 2/2] iio: imu: smi240: add driver
  • From: "Shen Jianping (ME-SE/EAD2)" <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: imu: smi240: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: light: opt3001: add compatible for opt3002
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• RE: [PATCH v7 2/2] iio: imu: smi240: add driver
  • From: "Shen Jianping (ME-SE/EAD2)" <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: also allow meson8-saradc to have amlogic,hhi-sysctrl property
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: light: opt3001: add compatible for opt3002
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: adi,ad56xx: Fix duplicate compatible strings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 1/3] iio: light: opt3001: add missing full-scale range value
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v3 0/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v3 3/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: light: opt3001: add compatible for opt3002
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v2 2/2] iio: bmi323: fix reversed if statement in bmi323_core_runtime_resume()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2 1/2] iio: bmi323: fix copy and paste bugs in suspend resume
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2 0/2] iio: bmi323: Fix some bugs in suspend resume
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
• [PATCH] iio: pac1921: remove unnecessary explicit casts
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v5 0/3] iio: adc: add new ad7625 driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: kmx61: Drop most likely fake ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• Re: [PATCH v2 1/3] iio: light: opt3001: add missing full-scale range value
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: light: opt3001: add compatible for opt3002
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• Re: [PATCH v6 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 7/7] iio: light: veml6030: add support for veml6035
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: also allow meson8-saradc to have amlogic,hhi-sysctrl property
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] iio: light: veml6030: update sensor resolution
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v6 2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH] iio: light: ltr390: Replaced mask values with GENMASK()
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v3 4/4] iio: light: ltr390: Add interrupt persistance support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v3 3/4] iio: light: ltr390: Interrupts and threshold event support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v3 2/4] iio: light: ltr390: Suspend and Resume support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v3 1/4] iio: light: ltr390: Added configurable sampling frequency support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v3 0/4] Threshold event and Sampling freq support for LTR390
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v2 1/4] iio: light: ltr390: Added configurable sampling frequency support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: adc: add new ad7625 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: light: ltr390: Added configurable sampling frequency support
  • From: Abhash jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: imu: smi240: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: light: opt3001: add missing full-scale range value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: light: veml6030: add support for veml6035
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: light: veml6030: add set up delay after any power on sequence
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: light: veml6030: update sensor resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: light: veml6030: make use of regmap_set_bits()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: iio: light: veml6030: rename to add manufacturer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/7] iio: light: veml6030: fix IIO device retrieval from embedded device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RESEND] tools/iio: Add memory allocation failure check for trigger_name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: kmx61: Drop most likely fake ACPI ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: bmi323: Fix some bugs in suspend resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmi323: Fix array reference in bmi323_core_runtime_suspend()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: adi,ad56xx: Fix duplicate compatible strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: al3010: Fix an error handling path in al3010_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmi323: Fix array reference in bmi323_core_runtime_suspend()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: bma400: Fix uninitialized variable field_value in tap event handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: light: ltr390: Add interrupt persistance support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: light: ltr390: Interrupts and threshold event support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: kmx61: Drop most likely fake ACPI ID
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: light: ltr390: Suspend and Resume support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: light: ltr390: Added configurable sampling frequency support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: bmi323: fix reversed if statement in bmi323_core_runtime_resume()
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: There is a potential buffer overflow issue in bmi323
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: temperature: tmp006: support for drdy irq
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: iio: pressure: bmp280: Use char instead of s32 for data buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [Bug 216037] Second MXC6655 accelerometer is not detected on transformer Aquarius NS483 laptop
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/8] iio:adc:ad7606: Add iio-backend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: adc: ad7606: Switch to xxx_get_device_match_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: adc: ad7606: Switch to xxx_get_device_match_data
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v7 4/4] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v7 3/4] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v7 2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v7 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v7 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v6 2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v6 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v6 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: adc: pac1921: add missing error return in probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: light: opt3001: add compatible for opt3002
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: iio: light: veml6030: add veml6035
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: iio: light: veml6030: rename to add manufacturer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH v5 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• [PATCH v6 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 7/8] dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 5/8] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 4/8] iio: adc: ad7606: wrap channel ranges & scales into struct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 3/8] iio: adc: ad7606: move scale_setup as function pointer on chip-info
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 2/8] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 1/8] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 0/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 7/7] iio: light: veml6030: add support for veml6035
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 6/7] iio: light: veml6030: add set up delay after any power on sequence
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 5/7] iio: light: veml6030: update sensor resolution
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 4/7] iio: light: veml6030: make use of regmap_set_bits()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 3/7] iio: light: veml6030: fix IIO device retrieval from embedded device
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/7] dt-bindings: iio: light: veml6030: add veml6035
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/7] dt-bindings: iio: light: veml6030: rename to add manufacturer
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/7] iio: light: veml6030: fix issues and add support for veml6035
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v7 2/2] iio: imu: smi240: add driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v7 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: light: opt3001: add compatible for opt3002
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v2 3/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v2 0/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• [PATCH v2 1/3] iio: light: opt3001: add missing full-scale range value
  • From: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: kmx61: Drop most likely fake ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] iio:adc:ad7606: Add iio-backend support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• Re: [PATCH v5 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v6 4/4] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v6 3/4] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v6 2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v6 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v6 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v4 0/2] Add I2C driver for Bosch BMI270 IMU
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: mfd: mediatek,mt6357: Describe Auxiliary ADC subdev
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: kmx61: Drop most likely fake ACPI ID
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v5 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v5 0/3] add support for ad777x family
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• Re: [PATCH 8/8] iio:adc:ad7606: Add iio-backend support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH 8/8] iio:adc:ad7606: Add iio-backend support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH v4 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH v4 0/2] add AD8460 DAC driver
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: mfd: mediatek,mt6357: Describe Auxiliary ADC subdev
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [RESEND] tools/iio: Add memory allocation failure check for trigger_name
  • From: Zhu Jun <zhujun2@xxxxxxxxxxxxxxxxxxxx>
• [RESEND] tools/iio: Add memory allocation failure check for trigger_name
  • From: Zhu Jun <zhujun2@xxxxxxxxxxxxxxxxxxxx>
• [RESEND] tools/iio: Add memory allocation failure check for trigger_name
  • From: Zhu Jun <zhujun2@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: imu: kmx61: Drop most likely fake ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: light: ltr501: Drop most likely fake ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: adi,ad56xx: Fix duplicate compatible strings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: also allow meson8-saradc to have amlogic,hhi-sysctrl property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add I2C driver for Bosch BMI270 IMU
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH] iio: adc: pac1921: add missing error return in probe()
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 2/2] iio: bmi323: fix reversed if statement in bmi323_core_runtime_resume()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/2] iio: bmi323: fix copy and paste bugs in suspend resume
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 0/2] iio: bmi323: Fix some bugs in suspend resume
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: adi,ad56xx: Fix duplicate compatible strings
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] dt-bindings: iio: dac: adi,ad56xx: Fix duplicate compatible strings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add I2C driver for Bosch BMI270 IMU
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 0/7] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: iio: pressure: bmp280: Use char instead of s32 for data buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH] iio: light: al3010: Fix an error handling path in al3010_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] iio: bmi323: Drop CONFIG_PM guards around runtime functions
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v6 2/2] iio: imu: smi240: add driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v6 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH] iio: accel: bma400: Fix uninitialized variable field_value in tap event handling.
  • From: Mikhail Lobanov <m.lobanov@xxxxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 3/4] iio: light: ltr390: Interrupts and threshold event support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v2 4/4] iio: light: ltr390: Add interrupt persistance support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v2 3/4] iio: light: ltr390: Interrupts and threshold event support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v2 2/4] iio: light: ltr390: Suspend and Resume support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v2 1/4] iio: light: ltr390: Added configurable sampling frequency support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v2 0/4] Threshold event and Sampling freq support for LTR390
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• RE: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: light: ltr390: Interrupts and threshold event support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmi323: Fix array reference in bmi323_core_runtime_suspend()
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: Introduce and use aligned_s64 type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: bmi323: Fix array reference in bmi323_core_runtime_suspend()
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [Bug 218223] Ambient light sensor on Framework 13 AMD laptop stops working in Linux 6.7
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [Bug 216037] Second MXC6655 accelerometer is not detected on transformer Aquarius NS483 laptop
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [Bug 218223] Ambient light sensor on Framework 13 AMD laptop stops working in Linux 6.7
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 218223] Ambient light sensor on Framework 13 AMD laptop stops working in Linux 6.7
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v5 3/3] docs: iio: new docs for ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v5 2/3] iio: adc: ad7625: add driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v5 0/3] iio: adc: add new ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [Bug 216678] iio: light: rpr0521: build error when IIO_TRIGGERED_BUFFER is disabled
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 8/9] iio: dac: ad3552r: add axi platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: adc: ad7625: add driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 4/4] iio: light: ltr390: Add interrupt persistance support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH 3/4] iio: light: ltr390: Interrupts and threshold event support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH 2/4] iio: light: ltr390: Suspend and Resume support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH 1/4] iio: light: ltr390: Added configurable sampling frequency support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH 0/4] Threshold event and Sampling freq support for LTR390
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v4 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v4 1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v4 0/2] Continuous mode support for VL53l0x
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• RE: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH v1 0/3] iio: reduce acpi.h usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: Introduce and use aligned_s64 type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 00/22] iio: use dev_get_platdata() to access platform_data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/9] iio: dac: ad3552r: add axi platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• RE: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• Re: [PATCH v2 4/9] iio: backend adi-axi-dac: add registering of child fdt node
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 0/3] Add support for AD4113
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• 回复: 回复: 回复: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: jason liu <jasonliu10041728@xxxxxxxxx>
• Re: 回复: 回复: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/3] iio: light: opt3001: add missing full-scale range value
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• 回复: 回复: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: jason liu <jasonliu10041728@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: temperature: tmp006: document interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH v3 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v3 0/2] Add I2C driver for Bosch BMI270 IMU
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v8 2/9] mfd: core: make platform_data pointer const in struct mfd_cell
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 0/9] Drivers to support the MCU on QNAP NAS devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 3/9] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 9/9] arm64: dts: rockchip: set hdd led labels on qnap-ts433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 8/9] arm64: dts: rockchip: hook up the MCU on the QNAP TS433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 7/9] hwmon: add driver for the hwmon parts of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 6/9] Input: add driver for the input part of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 4/9] mfd: add base driver for qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v8 5/9] leds: add driver for LEDs from qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• RE: [PATCH] tools/counter: close fd when exit
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: temperature: tmp006: document interrupt
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• [PATCH v2 1/2] iio: temperature: tmp006: add triggered buffer support
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• [PATCH v2 0/2] iio: temperature: tmp006: support for drdy irq
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• Re: [PATCH v2 8/9] iio: dac: ad3552r: add axi platform driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 8/9] iio: dac: ad3552r: add axi platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/9] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 8/9] iio: dac: ad3552r: add axi platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/9] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/9] iio: backend adi-axi-dac: extend features
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: hdc3020: fix hysteresis representation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/9] iio: backend adi-axi-dac: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/9] iio: backend: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/9] iio: backend adi-axi-dac: add registering of child fdt node
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] iio: ABI: add DAC sysfs synchronous_mode parameter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: adc: ad7625: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: imu: smi240: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Constify struct iio_map
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PULL] IIO: 2nd set of new device support, features and cleanup for 6.12.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: 回复: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/9] iio: adc: ad7606: rework available attributes for SW channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Constify struct iio_map
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Add support for AD4113
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: 2nd set of new device support, features and cleanup for 6.12.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: adc: ad7625: add driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 0/9] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v5 6/9] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v5 1/9] iio: adc: ad7606: remove frstdata check for serial mode
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: light: opt3001: add missing full-scale range value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: Convert to IIO_MAP()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: Constify struct iio_map
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: inv_mpu6050: Use upper_16_bits()/lower_16_bits() helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: cm32181: Remove duplicate ACPI handle check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/7] pressure: bmp280: Minor cleanup and interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: Move setting 'wom_bits' to probe function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: Move setting 'wom_bits' to probe function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: temperature: tmp006: add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: event_monitor: Fix missing free in main
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 00/22] iio: use dev_get_platdata() to access platform_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: Introduce and use aligned_s64 type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 0/3] iio: reduce acpi.h usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: ad74xxx: Constify struct iio_chan_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 9/9] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/9] iio: adc: ad7606: rework available attributes for SW channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/9] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/9] iio: adc: ad7606: remove frstdata check for serial mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/9] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/15] IIO: use irq_get_trigger_type() instead of opencoding.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/15] iio: imu: bmi160: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/15] iio: common: st: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 7/8] dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH RFC 2/8] iio: backend: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: addac: ad74xxx: Constify struct iio_chan_spec​
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: iio: adc: ad7606: Add iio backend bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 00/15] Add Battery and USB Supply for AXP717
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] counter: ftm-quaddec: Enable module autoloading
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v5 9/9] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 8/9] dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 7/9] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 6/9] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 5/9] iio: adc: ad7606: wrap channel ranges & scales into struct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 4/9] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 3/9] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 2/9] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 1/9] iio: adc: ad7606: remove frstdata check for serial mode
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 0/9] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v2 0/2] Add I2C driver for Bosch BMI270 IMU
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: iio: dac: add ad3552r axi-dac compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: iio: dac: add ad3552r axi-dac compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: iio: dac: add ad3552r axi-dac compatible
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: iio: dac: add ad3552r axi-dac compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: iio: dac: add ad3552r axi-dac compatible
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: iio: dac: add ad3552r axi-dac compatible
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 4/9] iio: backend adi-axi-dac: add registering of child fdt node
  • From: David Lechner <dlechner@xxxxxxxxxxxx>