Linux IIO Development

• Thread Index

• LINUS TORVALDS IS A DICK
  • From: Russian Troll Factory No2333113724691862412370505314550.301522361658681972819097215937998212703204793632409614950580.711014116901113627315250812066331608136907483394686821870024.03945103220676365158666227821@, 023194241294853174252633236415477431128953129634621983145628183164041341426725317303911042211867172392509323321422424082610610727276851001532673 <vladimirputin693389@xxxxxxxxx>
• LINUS TORVALDS IS A DICK
  • From: Russian Troll Factory No15872808016711155501295394132314014329123383180896101673526784107152032490028137321872772627535220808528284975537183562225013000 <vladimirputin693389@xxxxxxxxx>
• Re: linux-next: manual merge of the char-misc tree with the iio-fixes tree
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 0/2] MAINTAINERS: Remove few Chinese Entries
  • From: NotYourFox <contact@notyourfox.coffee>
• Re: [PATCH v2] iio: dac: Kconfig: Fix build error for ltc2664
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH] iio: light: veml6030: fix microlux value calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: linux-next: manual merge of the char-misc tree with the iio-fixes tree
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Ivan Epifanov <isage.dna@xxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Nopempele N <nopempele@xxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: ad7124: Disable all channels at probe time
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH 0/3] iio: adc: ad7124: Make it work on de10-nano
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Ivan Epifanov <isage.dna@xxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Ivan Epifanov <isage.dna@xxxxxxxxx>
• Re: [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: kxcjk-1013: Add support for KX022-1020
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] iio: adc: ad7380: use if_not_cond_guard for claim direct
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1 5/9] watchdog: Add Nuvoton NCT6694 WDT support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/9] mfd: Add core driver for Nuvoton NCT6694
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 5/9] watchdog: Add Nuvoton NCT6694 WDT support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 4/9] can: Add Nuvoton NCT6694 CAN support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/9] mfd: Add core driver for Nuvoton NCT6694
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v7 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1 6/9] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH RFC v4 03/15] spi: offload: add support for hardware triggers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1 6/9] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC v4 02/15] spi: add basic support for SPI offloading
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: kxcjk-1013: Add support for KX022-1020
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 4/9] can: Add Nuvoton NCT6694 CAN support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/9] can: Add Nuvoton NCT6694 CAN support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/2] MAINTAINERS: Remove few Chinese Entries
  • From: Vladimir Vladimirovich Putin <vladimir_putin_rus@xxxxxxxxxx>
• Re: [PATCH RFC v4 00/15] spi: axi-spi-engine: add offload support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: Remove Loongson due to compilance requirements.
  • From: Vladimir Vladimirovich Putin <vladimir_putin_rus@xxxxxxxxxx>
• [PATCH 1/2] MAINTAINERS: Remove Huawei due to compilance requirements.
  • From: Vladimir Vladimirovich Putin <vladimir_putin_rus@xxxxxxxxxx>
• Re: [PATCH RFC v4 03/15] spi: offload: add support for hardware triggers
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 3/3] iio: hid-sensor-prox: Add support for more channels
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH 2/3] iio: hid-sensors-prox: Factor-in hid_sensor_push_data
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH 1/3] iio: hid-sensors: Add proximity and attention IDs
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH 0/3] iio: hid-sensors-prox: Add support for more channels
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: [PATCH RFC v4 02/15] spi: add basic support for SPI offloading
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 02/13] iio: adc: pac1934: Replace strange way of checking type of enumeration
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/13] iio: Clean up acpi_match_device() use cases
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2 11/13] iio: light: ltr501: Drop most likely fake ACPI IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 12/13] iio: light: ltr501: Add LTER0303 to the supported devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 07/13] iio: accel: mma9553: Replace custom implementation of iio_get_acpi_device_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 08/13] iio: gyro: bmg160: Replace custom implementation of iio_get_acpi_device_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 05/13] iio: acpi: Add iio_get_acpi_device_name_and_data() helper function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 04/13] iio: acpi: Improve iio_read_acpi_mount_matrix()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 03/13] iio: imu: inv_mpu6050: Replace strange way of checking type of enumeration
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 01/13] iio: magnetometer: bmc150: Drop dead code from the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 00/13] iio: Clean up acpi_match_device() use cases
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 09/13] iio: light: isl29018: Replace a variant of iio_get_acpi_device_name_and_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 10/13] iio: light: isl29018: drop ACPI_PTR() and CONFIG_ACPI guards
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 13/13] iio: light: ltr501: Replace a variant of iio_get_acpi_device_name_and_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/13] iio: accel: mma9551: Replace custom implementation of iio_get_acpi_device_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 02/13] iio: adc: pac1934: Replace strange way of checking type of enumeration
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: 陈寒彤 <cxwdyx620@xxxxxxxxx>
• Re: [PATCH v1 03/13] iio: imu: inv_mpu6050: Replace strange way of checking type of enumeration
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 5/7] iio: imu: inv_mpu6050: simplify code in write_event_config callback
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v1 4/9] can: Add Nuvoton NCT6694 CAN support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 0/9] Add Nuvoton NCT6694 MFD devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: Jensen Huang <jensenhuangnvdia@xxxxxxxxx>
• Re: what about CoC? (was: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements.")
  • From: Wanglei <wanglei@xxxxxxxxxxx>
• Re: what about CoC? (was: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements.")
  • From: Wanglei <wanglei@xxxxxxxxxxx>
• Re: [PATCH v1 3/9] i2c: Add Nuvoton NCT6694 I2C support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6] iio: adc: pac1921: Add ACPI support to Microchip pac1921
  • From: <victor.duicu@xxxxxxxxxxxxx>
• what about CoC? (was: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements.")
  • From: Michael Shigorin <mike@xxxxxxxxxxx>
• Re: [PATCH v1 1/9] mfd: Add core driver for Nuvoton NCT6694
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Ivan Epifanov <isage.dna@xxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: B4D_US3R <producerkgb@xxxxxxxxx>
• Re: [PATCH v1 2/9] gpio: Add Nuvoton NCT6694 GPIO support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v1 6/9] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@xxxxxxxxxxxx>
• [PATCH 7/7] iio: fix write_event_config signature
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 6/7] iio: light: stk3310: simplify code in write_event_config callback
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 5/7] iio: imu: inv_mpu6050: simplify code in write_event_config callback
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 4/7] iio: light: veml6030: simplify code in write_event_config callback
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 3/7] iio: light: ltr501: simplify code in write_event_config callback
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 2/7] iio: light: ltr390: simplify code in write_event_config callback
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 1/7] iio: light: bh1745: simplify code in write_event_config callback
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 0/7] iio: fix write_event_config signature
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v1 1/9] mfd: Add core driver for Nuvoton NCT6694
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v1 9/9] rtc: Add Nuvoton NCT6694 RTC support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 8/9] pwm: Add Nuvoton NCT6694 PWM support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 7/9] iio: adc: Add Nuvoton NCT6694 IIO support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 6/9] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 5/9] watchdog: Add Nuvoton NCT6694 WDT support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 4/9] can: Add Nuvoton NCT6694 CAN support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 3/9] i2c: Add Nuvoton NCT6694 I2C support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 2/9] gpio: Add Nuvoton NCT6694 GPIO support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 1/9] mfd: Add core driver for Nuvoton NCT6694
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v1 0/9] Add Nuvoton NCT6694 MFD devices
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 3/4] iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 4/4] docs: iio: ad7380: add adaq4370-4 and adaq4380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 2/4] iio: adc: ad7380: fix oversampling formula
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 0/4] ad7380: add adaq4370-4 and adaq4380-4 support
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v1 00/13] iio: Clean up acpi_match_device() use cases
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 00/13] iio: Clean up acpi_match_device() use cases
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Integral <integral@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Philip Müller <philm@xxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Ar Worf <fricks6@xxxxxxxxx>
• [PATCH v2] iio: dac: Kconfig: Fix build error for ltc2664
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• [PATCH 11/11] iio: dac: ad5770r: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 10/11] iio: dac: ad5761: drop driver remove callback
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 09/11] iio: dac: ad5761: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 08/11] iio: dac: ad5624r: drop driver remove callback
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 07/11] iio: dac: ad5624r: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 06/11] iio: dac: ad5504: drop driver remove callback
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 05/11] iio: dac: ad5504: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 04/11] iio: dac: ad5446: drop driver remove callbacks
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 03/11] iio: dac: ad5446: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 02/11] iio: dac: ad5380: drop driver remove callbacks
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 01/11] iio: dac: ad5380: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 00/11] iio: use devm_regulator_get_enable_read_voltage round 5
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: NotYourFox <contact@notyourfox.coffee>
• [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 14/15] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 13/15] iio: adc: ad7944: add support for SPI offload
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 12/15] iio: adc: ad7944: don't use storagebits for sizing
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 11/15] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 10/15] iio: buffer-dmaengine: document iio_dmaengine_buffer_setup_ext
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 09/15] spi: axi-spi-engine: implement offload support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 08/15] spi: dt-bindings: axi-spi-engine: add SPI offload properties
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 07/15] spi: add offload TX/RX streaming APIs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 06/15] spi: offload-trigger: add PWM trigger driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 05/15] spi: dt-bindings: add PWM SPI offload trigger
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 04/15] spi: dt-bindings: add trigger-source.yaml
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 03/15] spi: offload: add support for hardware triggers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 02/15] spi: add basic support for SPI offloading
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 01/15] pwm: core: export pwm_get_state_hw()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH RFC v4 00/15] spi: axi-spi-engine: add offload support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Tor Vic <torvic9@xxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Peter Cai <peter@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Peter Cai <peter@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Phillip Susi <phill@xxxxxxxxxxxx>
• [PATCH v3 2/2] iio: light: add support for veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: veml6030: add veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 0/2] iio: light: add support for veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Tor Vic <torvic9@xxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Yao Zi <ziyao@xxxxxxxxxxx>
• Re: [PATCH v1 00/13] iio: Clean up acpi_match_device() use cases
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v1 13/13] iio: light: ltr501: Replace a variant of iio_get_acpi_device_name_and_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 12/13] iio: light: ltr501: Add LTER0303 to the supported devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/13] iio: accel: mma9551: Replace custom implementation of iio_get_acpi_device_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/13] iio: light: isl29018: Replace a variant of iio_get_acpi_device_name_and_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/13] iio: accel: mma9553: Replace custom implementation of iio_get_acpi_device_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 04/13] iio: acpi: Improve iio_read_acpi_mount_matrix()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/13] iio: imu: inv_mpu6050: Replace strange way of checking type of enumeration
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 00/13] iio: Clean up acpi_match_device() use cases
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 02/13] iio: adc: pac1934: Replace strange way of checking type of enumeration
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/13] iio: magnetometer: bmc150: Drop dead code from the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 11/13] iio: light: ltr501: Drop most likely fake ACPI IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/13] iio: light: isl29018: drop ACPI_PTR() and CONFIG_ACPI guards
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/13] iio: acpi: Add iio_get_acpi_device_name_and_data() helper function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 08/13] iio: gyro: bmg160: Replace custom implementation of iio_get_acpi_device_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Yangyu Chen <cyy@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
• Re: [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Lance Yang <ioworker0@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH] iio: gyro: bmg160_core: remove trailing tab
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: accel: replace s64 __aligned(8) with aligned_s64
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] cleanup: add conditional guard helper
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements
  • From: jisralbasha <jisralbasha@xxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• Re: [PATCH] iio: Fix build error for ltc2664
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: Mingcong Bai <jeffbai@xxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: Anna Antonenko <portasynthinca3@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: WangYuli <wangyuli@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Tonghao Zhang <xiangxia.m.yue@xxxxxxxxx>
• [PATCH v2 3/4] iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 4/4] docs: iio: ad7380: add adaq4370-4 and adaq4380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 2/4] iio: adc: ad7380: fix oversampling formula
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 0/4] ad7380: add adaq4370-4 and adaq4380-4 support
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Mingcong Bai <jeffbai@xxxxxxx>
• Re: [PATCH] iio: Fix build error for ltc2664
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: WangYuli <wangyuli@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: Mingcong Bai <jeffbai@xxxxxxx>
• [PATCH] iio: Fix build error for ltc2664
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• [PATCH] Revert "MAINTAINERS: Remove some entries due to various compliance requirements."
  • From: Kexy Biscuit <kexybiscuit@xxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: Mingcong Bai <jeffbai@xxxxxxx>
• Re: [PATCH v3 0/5] iio: adc: ad7380: fix several supplies issues
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH] MAINTAINERS: Remove some entries due to various compliance requirements.
  • From: WangYuli <wangyuli@xxxxxxxxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: ad4851: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 3/6] iio: adc: adi-axi-adc: add interface type
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] iio: backend: add API for interface get
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] drivers/iio/adc/ad7124.c: fix division by zero in ad7124_set_channel_odr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers/staging/iio/frequency/ad9832.c: fix division by zero in ad9832_calc_freqreg()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: adc: ad7380: fix several supplies issues
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: imu: bmi270: Provide chip info as configuration structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: imu: bmi270: Remove unused FREQUENCY / SCALE attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: Remove "default n" entries
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: Remove "default n" entries
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: add support for veml3235
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/13] dt-bindings: iio: add binding for BME680 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: iio: imu: bmi270: Add Bosch BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: light: Remove "default n" entries
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: adc: Remove "default n" entries
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers/staging/iio/frequency/ad9832.c: fix division by zero in ad9832_calc_freqreg()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] drivers/staging/iio/frequency/ad9832.c: fix division by zero in ad9832_calc_freqreg()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] drivers/iio/adc/ad7124.c: fix division by zero in ad7124_set_channel_odr()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] drivers/staging/iio/frequency/ad9832.c: fix division by zero in ad9832_calc_freqreg()
  • From: Zicheng Qu <quzicheng@xxxxxxxxxx>
• [PATCH] drivers/iio/adc/ad7124.c: fix division by zero in ad7124_set_channel_odr()
  • From: Zicheng Qu <quzicheng@xxxxxxxxxx>
• [PATCH] staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
  • From: Zicheng Qu <quzicheng@xxxxxxxxxx>
• Re: [PATCH v2 11/13] dt-bindings: iio: add binding for BME680 driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 5/5] docs: iio: ad7380: fix supply for ad7380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 4/5] iio: adc: ad7380: fix supplies for ad7380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 3/5] iio: adc: ad7380: add missing supplies
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 2/5] iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 1/5] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 0/5] iio: adc: ad7380: fix several supplies issues
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [Bug 219418] BOSC0200 Accelerometer Invalid chip 12 initialization error
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219418] BOSC0200 Accelerometer Invalid chip 12 initialization error
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219418] New: BOSC0200 Accelerometer Invalid chip 12 initialization error
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v7 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v7 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5] iio: adc: pac1921: Add ACPI support to Microchip pac1921
  • From: <Victor.Duicu@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad7606: rework scale-available to be static
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7606: fix issue/quirk with find_closest() for oversampling
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad7606: rework scale-available to be static
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7606: fix issue/quirk with find_closest() for oversampling
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 3/6] iio: adc: ad7606: use realbits for sign-extending in scan_direct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: (subset) [PATCH v5 0/3] Add SARADC support on Sophgo CV18XX series
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• Re: [PATCH v5 3/3] riscv: dts: sophgo: Add SARADC description for Sophgo CV1800B
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• Re: [PATCH v2 11/13] dt-bindings: iio: add binding for BME680 driver
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/5] iio: adc: ad7380: fix several supplies issues
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: add support for veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 01/13] iio: chemical: bme680: Fix missing header
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: Add Null pointer check
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 13/13] iio: chemical: bme680: add power management
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 12/13] iio: chemical: bme680: add regulators
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 11/13] dt-bindings: iio: add binding for BME680 driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 10/13] iio: chemical: bme680: Add support for preheat current
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 09/13] iio: chemical: bme680: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 08/13] iio: chemical: bme680: Add SCALE and RAW channels
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 07/13] iio: chemical: bme680: generalize read_*() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 06/13] iio: chemical: bme680: Fix indentation and unnecessary spaces
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 05/13] iio: chemical: bme680: move to fsleep()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 04/13] iio: chemical: bme680: refactorize set_mode() mode
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 03/13] iio: chemical: bme680: avoid using camel case
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 02/13] iio: chemical: bme680: optimize startup time
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 01/13] iio: chemical: bme680: Fix missing header
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 00/13]: chemical: bme680: 2nd set of cleanup
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7606: fix issue/quirk with find_closest() for oversampling
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad7606: fix issue/quirk with find_closest() for oversampling
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: add support for veml3235
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: replace s64 __aligned(8) with aligned_s64
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: gyro: bmg160: Drop most likely fake ACPI IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad7606: rework scale-available to be static
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 3/6] iio: adc: ad7606: use realbits for sign-extending in scan_direct
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: iio: adc: adi,ad7606: document AD760{7,8,9} parts
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 4/6] iio: adc: ad7606: rework scale-available to be static
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 6/6] iio: adc: ad7606: add support for AD760{7,8,9} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v5 0/8] Add iio backend compatibility for ad7606
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 2/6] iio: adc: ad7606: fix issue/quirk with find_closest() for oversampling
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 5/6] dt-bindings: iio: adc: adi,ad7606: document AD760{7,8,9} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 3/6] iio: adc: ad7606: use realbits for sign-extending in scan_direct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 1/6] iio: adc: ad7606: fix/persist oversampling_ratio setting
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 0/6] iio: adc: ad7606: add support for AD760{7,8,9} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v5 5/5] iio: as73211: copy/release available integration times to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v5 4/5] iio: ad7192: copy/release available filter frequencies to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v5 3/5] iio: pac1921: use read_avail+release APIs instead of custom ext_info
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v5 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v5 1/5] iio: core: add read_avail_release_resource callback to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v5 0/5] iio: fix possible race condition during access of available info lists
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: adc: ad7380: fix supplies for ad7380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 3/8] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 1/8] dt-bindings: iio: dac: ad3552r: add iio backend support
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v7 0/8] iio: add support for the ad3552r AXI DAC IP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v2 3/3] iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add Allegro MicroSystems, Inc
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/3] iio: magnetometer: add support for the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: adc: ad7380: fix supplies for ad7380-4
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 3/5] iio: adc: ad7380: add missing supplies
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2 5/5] docs: iio: ad7380: fix supply for ad7380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 4/5] iio: adc: ad7380: fix supplies for ad7380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 3/5] iio: adc: ad7380: add missing supplies
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 2/5] iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2 0/5] iio: adc: ad7380: fix several supplies issues
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v2] iio: invensense: fix multiple odr switch when FIFO is off
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• Re: [PATCH] iio: accel: replace s64 __aligned(8) with aligned_s64
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: accel: replace s64 __aligned(8) with aligned_s64
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: accel: replace s64 __aligned(8) with aligned_s64
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: iio: imu: bmi270: Add Bosch BMI260
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: veml6030: add veml3235
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] iio: accel: replace s64 __aligned(8) with aligned_s64
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: gyro: bmg160: Drop most likely fake ACPI IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 6/6] iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v3 5/6] iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v3 3/6] dt-bindings: iio: imu: bmi270: Add Bosch BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v3 2/6] iio: imu: bmi270: Provide chip info as configuration structure
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v3 1/6] iio: imu: bmi270: Remove unused FREQUENCY / SCALE attributes
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v3 0/6] Add i2c driver for Bosch BMI260 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: light: add support for veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: light: veml6030: add veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 0/2] iio: light: add support for veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] iio: invensense: fix multiple odr switch when FIFO is off
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: accel: replace s64 __aligned(8) with aligned_s64
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 3/4] iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: proximity: hx9023s: Add performance tuning function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: iio: imu: Add Bosch BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: imu: bmi270: Provide chip info as configuration structure
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] iio: imu: bmi270: Use INFO_SAMP_FREQ instead of INFO_FREQUENCY
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v7 5/8] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/8] iio: dac: adi-axi-dac: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/8] Add iio backend compatibility for ad7606
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/8] iio: adc: ad7606: Add PWM support for conversion trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: addac: ad74413r: minor improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: invensense: fix multiple odr switch when FIFO is off
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: veml6030: fix microlux value calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: add support for veml3235
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: light: veml6070: add support for integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: light: veml6070: use field to set integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: light: veml6070: use unsigned int instead of unsigned
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: light: veml6075: document rset-kohms
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: list adis16137 in Kconfig description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7192: properly check spi_get_device_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: ad4851: add ad485x driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/6] dt-bindings: iio: adc: add ad4851
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: Add Null pointer check
  • From: Karan Sanghavi <karansanghvi98@xxxxxxxxx>
• Re: [PATCH] iio: accel: adxl355: Fix typo "accelaration"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/5] iio: fix possible race condition during access of available info lists
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: iio: imu: Add Bosch BMI260
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: imu: bmi270: Provide chip info as configuration structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] iio: imu: bmi270: Use INFO_SAMP_FREQ instead of INFO_FREQUENCY
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad8460: add SPI device match table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: Add Null pointer check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad8460: fix DT compatible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: magnetometer; bmc150_magn: Drop most likely fake ACPI IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: gyro: bmg160: Drop most likely fake ACPI IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: gyro: bmg160: Drop most likely fake ACPI IDs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: magnetometer; bmc150_magn: Drop most likely fake ACPI IDs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PULL V2] IIO: New device support, features and cleanup for 6.13
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] iio: as73211: copy/release available integration times to fix race
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] iio: gyro: list adis16137 in Kconfig description
  • From: "Yo-Jung (Leo) Lin" <0xff07@xxxxxxxxx>
• Re: [PATCH v5 7/8] iio: adc: ad7606: Add iio-backend support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 4/6] iio: imu: bmi270: Add support for BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v2 5/6] iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v2 6/6] iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v2 1/6] iio: imu: bmi270: Use INFO_SAMP_FREQ instead of INFO_FREQUENCY
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: iio: imu: Add Bosch BMI260
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v2 0/6] Add i2c driver for Bosch BMI260 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH v2 2/6] iio: imu: bmi270: Provide chip info as configuration structure
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH] iio: dac: ad8460: add SPI device match table
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: dac: ad8460: fix DT compatible
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: gyro: bmg160: Drop most likely fake ACPI IDs
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] cleanup: add conditional guard helper
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH] iio: chemical: sps30: Add Null pointer check
  • From: Karan Sanghavi <karansanghvi98@xxxxxxxxx>
• Re: [PATCH] iio: imu: inv_icm42600: Enable Pedometer Functionality
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 0/4] ad7380: add adaq4370-4 and adaq4380-4 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: Add scale and sampling frequency to BMI270 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: gyro: bmg160: Drop most likely fake ACPI IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• [PULL V2] IIO: New device support, features and cleanup for 6.13
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] cleanup: add conditional guard helper
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5] iio: adc: pac1921: Add ACPI support to Microchip pac1921
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v1 1/1] iio: magnetometer; bmc150_magn: Drop most likely fake ACPI IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: gyro: bmg160: Drop most likely fake ACPI IDs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] iio: adc: ad7606: Add iio-backend support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: light: veml6070: add support for integration time
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v9 2/2] iio: imu: smi240: add driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v9 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v9 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: light: veml6075: document rset-kohms
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] cleanup: add conditional guard helper
  • From: Przemek Kitszel <przemyslaw.kitszel@xxxxxxxxx>
• Re: [PATCH] iio: imu: inv_icm42600: Enable Pedometer Functionality
  • From: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
• [PATCH v5] iio: adc: pac1921: Add ACPI support to Microchip pac1921
  • From: <victor.duicu@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] cleanup: add conditional guard helper
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v4 6/6] iio: adc: ad4851: add ad485x driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 5/6] dt-bindings: iio: adc: add ad4851
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 4/6] iio: adc: adi-axi-adc: set data format
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 2/6] iio: backend: add support for data size set
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 3/6] iio: adc: adi-axi-adc: add interface type
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 1/6] iio: backend: add API for interface get
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 5/5] iio: as73211: copy/release available integration times to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v4 4/5] iio: ad7192: copy/release available filter frequencies to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v4 3/5] iio: pac1921: use read_avail+release APIs instead of custom ext_info
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v4 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v4 1/5] iio: core: add read_avail_release_resource callback to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v4 0/5] iio: fix possible race condition during access of available info lists
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v4] iio: adc: pac1921: Add ACPI support to Microchip pac1921
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v9 4/4] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v9 3/4] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v9 2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v9 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v9 0/4] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH 4/4] iio: light: veml6070: add support for integration time
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 3/4] dt-bindings: iio: light: veml6075: document rset-kohms
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/4] iio: light: veml6070: use field to set integration time
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/4] iio: light: veml6070: use unsigned int instead of unsigned
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/4] iio: light: veml6070: add integration time and minor cleanups.
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PULL] IIO: New device support, features and cleanup for 6.13
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: imu: bmi270: Remove duplicated include in bmi270_i2c.c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 5/8] iio: adc: ad7606: rework available attributes for SW channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: ad7606: Drop spurious empty file.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] IIO: New device support, features and cleanup for 6.13
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: New device support, features and cleanup for 6.13
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: invensense: fix multiple odr switch when FIFO is off
  • From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@xxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v3 2/2] iio: proximity: hx9023s: Add performance tuning function
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: tyhx,hx9023s: Add performance tuning configuration
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v3 0/2] iio: proximity: hx9023s: Add performance tuning function
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH] iio: accel: adxl355: Fix typo "accelaration"
  • From: WangYuli <wangyuli@xxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_icm42600: Enable Pedometer Functionality
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: veml6030: add veml3235
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• RE: [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: "Shen Jianping (ME-SE/EAD2)" <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] iio: light: add support for veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: veml6030: add veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/2] iio: light: add support for veml3235
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v4 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v4 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH v3 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [PATCH] iio: light: veml6030: fix microlux value calculation
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/3] iio: addac: ad74413r: use devm_regulator_get_enable_read_voltage()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 1/3] iio: addac: ad74413r: drop reset_gpio from struct ad74413r_state
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 3/3] iio: addac: ad74413r: simplify with cleanup.h
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 0/3] iio: addac: ad74413r: minor improvements
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v5 3/3] docs: iio: new docs for ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: imu: inv_icm42600: Enable Pedometer Functionality
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH RFC 0/4] ad7380: add adaq4370-4 and adaq4380-4 support
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH -next] iio: imu: bmi270: Remove duplicated include in bmi270_i2c.c
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v2] iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: Add scale and sampling frequency to BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• [PATCH -next] iio: imu: bmi270: Remove duplicated include in bmi270_i2c.c
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v5 3/3] docs: iio: new docs for ad7625 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 0/4] ad7380: add adaq4370-4 and adaq4380-4 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v3 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v5 5/8] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 8/8] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 7/8] iio: adc: ad7606: Add iio-backend support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 6/8] iio: adc: ad7606: Introduce num_adc_channels
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 4/8] iio: adc: ad7606: Add PWM support for conversion trigger
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 3/8] Documentation: iio: Document ad7606 driver
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 2/8] dt-bindings: iio: adc: ad7606: Add iio backend bindings
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 0/8] Add iio backend compatibility for ad7606
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 1/8] dt-bindings: iio: adc: ad7606: Remove spi-cpha from required
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v4] iio: adc: pac1921: Add ACPI support to Microchip pac1921
  • From: <victor.duicu@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v6 4/8] iio: dac: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH v3 5/5] iio: as73211: copy/release available integration times to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v3 4/5] iio: ad7192: copy/release available filter frequencies to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v3 3/5] iio: pac1921: use read_avail+release APIs instead of custom ext_info
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v3 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v3 1/5] iio: core: add read_avail_release_resource callback to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v3 0/5] iio: fix possible race condition during access of available info lists
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v6 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH] iio: imu: inv_icm42600: Enable Pedometer Functionality
  • From: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH] iio: gts-helper: Fix memory leaks for i = 1 error path
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• [PATCH RFC 4/4] docs: iio: ad7380: add adaq4370-4 and adaq4380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC 3/4] iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC 2/4] iio: adc: ad7380: fix oversampling formula
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC 1/4] dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC 0/4] ad7380: add adaq4370-4 and adaq4380-4 support
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH] iio: gts-helper: Fix memory leaks for i = 1 error path
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 4/8] iio: dac: adi-axi-dac: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: pac1921: add ACPI support to Microchip pac1921.
  • From: <Victor.Duicu@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 4/8] iio: dac: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 4/8] iio: dac: adi-axi-dac: extend features
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v8 3/4] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v8 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: Add scale and sampling frequency to BMI270 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: Add triggered buffer for Bosch BMI270 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: Add i2c driver for bmi260 imu
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: pac1921: add ACPI support to Microchip pac1921.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: adc: ad7625: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: pac1921: add ACPI support to Microchip pac1921.
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH] iio: adc: ad7192: properly check spi_get_device_match_data()
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v7 3/3] drivers: iio: adc: add support for ad777x family
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v7 0/3] Add support for AD777x family
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: adc: adi-axi-adc: set data format
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: adc: adi-axi-adc: add interface type
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v6 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 7/8] iio: dac: ad3552r: add high-speed platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 4/8] iio: dac: adi-axi-dac: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 3/8] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 1/8] dt-bindings: iio: dac: ad3552r: add iio backend support
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v6 0/8] iio: add support for the ad3552r AXI DAC IP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: pac1921: add ACPI support to Microchip pac1921.
  • From: <Victor.Duicu@xxxxxxxxxxxxx>
• [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 4/6] iio: adc: adi-axi-adc: set data format
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 5/6] dt-bindings: iio: adc: add ad4851
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 3/6] iio: adc: adi-axi-adc: add interface type
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 2/6] iio: backend: add support for data size set
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 1/6] iio: backend: add API for interface get
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: inkern: copy/release available info from producer
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• [PATCH] iio: gts-helper: Fix memory leaks for i = 1 error path
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: Add scale and sampling frequency to BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: Add triggered buffer for Bosch BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: Add i2c driver for bmi260 imu
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: Add scale and sampling frequency to BMI270 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] IIO: 1st set of fixes for the 6.12 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: Add triggered buffer for Bosch BMI270 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: Add i2c driver for bmi260 imu
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: Add scale and sampling frequency to BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: Add triggered buffer for Bosch BMI270 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: Add i2c driver for bmi260 imu
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add i2c driver for Bosch BMI260 IMU
  • From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: inkern: copy/release available info from producer
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v1 13/13] iio: chemical: bme680: Add support for preheat current
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 08/13] iio: chemical: bme680: add power management
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 03/13] iio: chemical: bme680: fix startup time
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 02/13] iio: chemical: bme680: avoid using camel case
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC v1 1/2] iio: light: rpr0521: Use generic iio_pollfunc_store_time()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/4] iio: pressure: bmp280: Add data ready trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: inkern: copy/release available info from producer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Interrupt and Continuous mode support for VL6180
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: 1st set of fixes for the 6.12 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add entry for VEML6030 ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: light: veml6030: add support for veml7700
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 09/10] iio: dac: ad3552r: add high-speed platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/10] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 01/10] iio: dac: adi-axi-dac: fix wrong register bitfield
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/10] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: adc: add new ad7625 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 13/13] iio: chemical: bme680: Add support for preheat current
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>