Hi. This patch adds the openwire detection support for the ad4111 chip. The openwire detection is done in software and relies on comparing the results of two conversions on different channels. Following the discussion in the RFC V1, I'm taking the easy route of adding a new event type called IIO_EV_TYPE_OPENWIRE to signal the condition to the userland. I have chosen this option rather than the generic TRACE_EVENT() solution exposed by Jonathan because this change is more contained and only impacts the iio subsystem. The TRACE_EVENT() option, although more generic, will require a lot of discussion between involved parties and is probably easier to tackle in person than through the mailing list? The openwire detection on ad4111 is triggered automatically when a single conversion is requested. Due to the way openwire detection works on ad4111, implementing openwire detection for continuous conversion mode is more complicated. Thx, Guillaume. Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx> --- Changes in v2: - Introduce IIO_EV_TYPE_OPENWIRE instead of misusing the IIO_EV_THRESH event. - Link to v1: https://lore.kernel.org/r/20241115-ad4111_openwire-v1-1-db97ac8bf250@xxxxxxxxxxxx --- Guillaume Ranquet (2): iio: introduce the OPENWIRE event type iio: adc: ad7173: add openwire detection support for single conversions drivers/iio/adc/ad7173.c | 164 +++++++++++++++++++++++++++++++++++++++ drivers/iio/industrialio-event.c | 1 + include/uapi/linux/iio/types.h | 1 + tools/iio/iio_event_monitor.c | 2 + 4 files changed, 168 insertions(+) --- base-commit: c849f534b9ea4688304f80f4571af75931dda7c1 change-id: 20241115-ad4111_openwire-e55deba8297f prerequisite-message-id: <20241115-ad411x_calibration-v1-1-5f820dfb5c80@xxxxxxxxxxxx> prerequisite-patch-id: 26241903b8fee8c4243e73d11fb2872cd9f52a15 Best regards, -- Guillaume Ranquet <granquet@xxxxxxxxxxxx>
