On 1/8/25 11:29 AM, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
>
> Change suggested from the AXI HDL team, modify the function
> axi_dac_data_stream_enable() to check for interface busy, to avoid
> possible issues when starting the stream.
>
> Fixes: e61d7178429a ("iio: dac: adi-axi-dac: extend features")
> Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> ---
> drivers/iio/dac/adi-axi-dac.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/iio/dac/adi-axi-dac.c b/drivers/iio/dac/adi-axi-dac.c
> index b143f7ed6847..d02eb535b648 100644
> --- a/drivers/iio/dac/adi-axi-dac.c
> +++ b/drivers/iio/dac/adi-axi-dac.c
> @@ -585,6 +585,17 @@ static int axi_dac_ddr_disable(struct iio_backend *back)
> static int axi_dac_data_stream_enable(struct iio_backend *back)
> {
> struct axi_dac_state *st = iio_backend_get_priv(back);
> + int ret, val;
> +
> + ret = regmap_read_poll_timeout(st->regmap,
> + AXI_DAC_UI_STATUS_REG, val,
> + FIELD_GET(AXI_DAC_UI_STATUS_IF_BUSY, val) == 0,
> + 10, 100 * KILO);
> + if (ret) {
> + if (ret == -ETIMEDOUT)
> + dev_err(st->dev, "AXI read timeout\n");
Do we really need the `dev_err()`? I think the ETIMEDOUT will bubble up to
userspace anyway via buffer_postenable.
If we keep it though, it could use a better message. The important part is that
the AXI IP block never became ready, not that reading the register timed out.
> + return ret;
> + }
>
> return regmap_set_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
> AXI_DAC_CUSTOM_CTRL_STREAM_ENABLE);
>
