Hi Jonathan, find my answer inlined down below.
On Sat, Jan 4, 2025 at 2:09 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>
> On Sat, 28 Dec 2024 23:29:45 +0000
> Lothar Rubusch <l.rubusch@xxxxxxxxx> wrote:
>
> > The adxl345 sensor offers several features. Most of them are based on
> > using the hardware FIFO and reacting on events coming in on an interrupt
> > line. Add access to configure and read out the FIFO, handling of interrupts
> > and configuration and application of the watermark feature on that FIFO.
> >
> > Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
> Series applied but with a tweak on patch 3. Please take a look at the
> testing branch where this will sit for a few days,
>
The patches w/ adjustments are looking fine at the sensor.
[Do I need to say ACK here, or the like? I guess not.]
Thank you so much for applying. I verified several watermark settings
and could observe /proc/interrupts increasing with at a higher and
lower pace, respectively, as expected. I could turn the feature on,
off and back on. I saw the measurements on my sensor as they used to
show up before.
I'll continue with the implementation of the sensor features, and I
will have a more thorough look at it anyway. I really appreciate the
adjustments. Again cleaner!
Best,
L
> Jonathan
>
> > ---
> > v8 -> v9:
> > - move FIELD_PREP() usage to a local usage in adxl345_core.c
> > - remove ADXL345_{SD}_TAP_MSK macros
> > v7 -> v8:
> > - remove dt-binding quotation marks
> > - add DMA alignment
> > - fix indention, formatting and text alignment
> > v6 -> v7:
> > - reorder dt-binding patches
> > - extracted FIFO specific from constants list
> > - reorder constants list in header patch to the end
> > - verify watermark input is within valid range
> > v5 -> v6:
> > - dropped justify patch, since unnecessary change to format mask
> > - added separate dt-bindings patch to remove required interrupts property
> > - merged FIFO watermark patches
> > - reworked bitfield handling
> > - group irq setup in probe()
> > - several type fixes by smatch and tools
> > v4 -> v5:
> > - fix dt-binding for enum array of INT1 and INT2
> > v3 -> v4:
> > - fix dt-binding indention
> > v2 -> v3:
> > - reorganize commits, merge the watermark handling
> > - INT lines are defined by binding
> > - kfifo is prepared by devm_iio_kfifo_buffer_setup()
> > - event handler is registered w/ devm_request_threaded_irq()
> > v1 -> v2:
> > Fix comments according to Documentation/doc-guide/kernel-doc.rst
> > and missing static declaration of function.
> > ---
> > Lothar Rubusch (4):
> > iio: accel: adxl345: introduce interrupt handling
> > iio: accel: adxl345: initialize FIFO delay value for SPI
> > iio: accel: adxl345: add FIFO with watermark events
> > iio: accel: adxl345: complete the list of defines
> >
> > drivers/iio/accel/adxl345.h | 77 +++++--
> > drivers/iio/accel/adxl345_core.c | 338 ++++++++++++++++++++++++++++++-
> > drivers/iio/accel/adxl345_i2c.c | 2 +-
> > drivers/iio/accel/adxl345_spi.c | 7 +-
> > 4 files changed, 404 insertions(+), 20 deletions(-)
> >
>
