On Wed, 22 Jan 2025 11:29:19 +0100
Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> Hi Claudiu,
>
> CC iio
>
> On Fri, Jan 3, 2025 at 5:38 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >
> > The Renesas RZ/G3S SoC features a Thermal Sensor Unit (TSU) that reports
> > the junction temperature. The temperature is reported through a dedicated
> > ADC channel. Add a driver for the Renesas RZ/G3S TSU.
> >
> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- /dev/null
> > +++ b/drivers/thermal/renesas/rzg3s_thermal.c
>
> > +static int rzg3s_thermal_probe(struct platform_device *pdev)
> > +{
> > + struct rzg3s_thermal_priv *priv;
> > + struct device *dev = &pdev->dev;
> > + int ret;
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(priv->base))
> > + return PTR_ERR(priv->base);
> > +
> > + priv->channel = devm_iio_channel_get(dev, "tsu");
>
> Given there's only a single IIO channel, you could pass NULL instead
> of the name, and drop "io-channel-names" from the DT bindings.
> I don't know what's the IIO policy w.r.t. unnamed channels, though.
It's supported, so fine as long as no future additional names show up.
Will just fallback to index 0 I think.
Jonathan
>
> > + if (IS_ERR(priv->channel))
> > + return dev_err_probe(dev, PTR_ERR(priv->channel), "Failed to get IIO channel!\n");
> > +
> > + priv->rstc = devm_reset_control_get_exclusive_deasserted(dev, NULL);
> > + if (IS_ERR(priv->rstc))
> > + return dev_err_probe(dev, PTR_ERR(priv->rstc), "Failed to get reset!\n");
> > +
> > + priv->dev = dev;
> > + priv->mode = THERMAL_DEVICE_DISABLED;
> > + platform_set_drvdata(pdev, priv);
> > +
> > + pm_runtime_set_autosuspend_delay(dev, 300);
> > + pm_runtime_use_autosuspend(dev);
> > + pm_runtime_enable(dev);
> > +
> > + ret = rzg3s_thermal_read_calib(priv);
> > + if (ret) {
> > + dev_err_probe(dev, ret, "Failed to read calibration data!\n");
> > + goto rpm_disable;
> > + }
> > +
> > + priv->tz = thermal_of_zone_register(dev->of_node, 0, priv, &rzg3s_tz_of_ops);
> > + if (IS_ERR(priv->tz)) {
> > + dev_err_probe(dev, PTR_ERR(priv->tz), "Failed to register thermal zone!\n");
> > + goto rpm_disable;
> > + }
> > +
> > + ret = thermal_add_hwmon_sysfs(priv->tz);
> > + if (ret) {
> > + dev_err_probe(dev, ret, "Failed to add hwmon sysfs!\n");
> > + goto tz_unregister;
> > + }
> > +
> > + return 0;
> > +
> > +tz_unregister:
> > + thermal_of_zone_unregister(priv->tz);
> > +rpm_disable:
> > + pm_runtime_disable(dev);
> > + pm_runtime_dont_use_autosuspend(dev);
> > + return ret;
> > +}
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
