[PULL] 1st set of IIO and counter new device support and core changes for the 5.13 cycle.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The following changes since commit c972c2d821ca3eda001a20dbe2ca0b4718838caf:

  staging: unisys: visornic: Fix repeated words in comments (2021-03-10 09:25:33 +0100)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.13a

for you to fetch changes up to 1b33dfa5d5f165782a1cb18ba1350a42d5d7a579:

  Merge remote-tracking branch 'local/ib-iio-scmi-5.12-rc2-take3' into togreg (2021-03-26 10:23:46 +0000)

----------------------------------------------------------------
1st set of IIO/counter device support, features and cleanup in the 5.13 cycle

Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.

Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem.  Merge required updating to reflect
some changes in IIO.

Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.

IIO New Device Support
* adi,ad5686
  - Add info to support AD5673R and AD5677R
* bosch,bmi088
  - New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
  - New driver for this proximity sensor that exposes a 'front'
    sensor. Very simple switch like device, but driver allows it
    to share interface with more sophisticated proximity sensors.
* iio_scmi
  - New driver to support ARM SCMI protocol to expose underlying
    accelerometers and gyroscopes via this firmware interface.
* st,st_magn
  - Add ID for IISMDC magnetometer.
* ti,ads131e0
  - New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs

Counter New Device Support
* IRQ or GPIO based counter
  - New driver for a conceptually simple counter that uses interrupts
    to perform the count.

Features
* core
  - Dual buffer supprt including:
     Various helpers to centralize handling of bufferer related elements.
     Document existing and new IOCTLs
     Register the IIO chrdev only if it can actually be used for anything.
     Rework attribute group creation in the core (lots of patches)
     Merge buffer/ and scan_elements/ entries into one list + maintain
     backwards compatible set.
     Introduce the internal logic and IOCTL to allow multiple buffers
     + access to an anon FD per buffer to actually read from it.
     Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
     Update ABI docs.
     A few follow up fixes, unsuprising as this was a huge bit of rework.
  - Move common case setting of trig->parent to the core.
  - Provide an iio_read_channel_processed_scale() to avoid loss of
    precision from iio_read_channel_processed() then applying integer
    scale. Use it in ntc_thermistor driver in hwmon.
  - Allow drivers to specify labels from elsewhere than DT. Use it for
    bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
  - Document label usage for proximity and accelerometer sensors.
  - Some local variable renames for consistency
tools
  - Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
  - Add trigger support for devices that don't support notification method.
* adi,ad7124
  - Allow more than 8 channels.  This is a complex little device, but is
    capable of supporting up to 16 channels if the share certain
    configuration settings.
* hrtimer-trigger
  - Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
  - Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
  - Enable timetamps when not using DMA.
* vishay,vcnl3020
  - Sampling frequency control.

Cleanup and minor fixes:
* treewide
  - Use some getter and setter functions instead of opencoding.
  - Set of fixes for pointless casts in various drivers.
  - Avoid wrong kernel-doc marking on comment blocks.
  - Fix various other minor kernel-doc issues shown by W=1
* core
  - Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
  - Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
  - Add unit tests for iio_format_value()
* docs
  - Fix formatting/typos in iio_configfs.rst and buffers.rst
  - Add documentation of index in buffers.rst
  - Fix scan element description
  - Avoid some issues with HTML generation from ABI docs by moving
    duplicated defintions to more generic files.
  - Drop reference to long dead mailing list.
* 104-quad
  - Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
  - Fix wrong bit of docs.
* adi,ad5791
  - Typos
* adi,ad9834
   - Switch to device managed functions in probe.
* adi,adis*
  - Add and use helpers for locking to reduced duplication.
* adi,adis16480
  - Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
  - Calculate the IMU scaled internal sampling rate and runtime depending
    on sysfs based configuration rather than getting from DT. Drop now
    unnecessary property from DT bindings doc.
* cros_ec
   - Fix result of a series of recent changes that means extended buffer
     attributes turn up in the wrong place. Too complex to revert the
     various patches unfortunately so this is a bit messy.
* fsl,mma3452
  - Indentation cleanup.
* hid-sensors
  - Size of storage needs to increase for some parts when using quaternions.
  - Move the get sensistivity attribute to hid-sensors-common to reduce
    duplication.  Enable it for more device types.
  - Correctly handle relative sensitivity if reported that way including
    documenting the new ABI.
* maxim,max517
  - Use device managed functions in probe.
* mediatek,mt6360-adc
  - Use asm/unaligned.h instead of directly including
    unaligned/be_byteshift.h
* novuton,npcm-adc
  - Local lock instead of missusing mlock.
* semtech,sx9500
  - Typos
* st,sensor
  - typo fix
* st,spear-adc
  - Local lock instead of missusing mlock.
* st,stm32-adc
  - Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
  - Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
  - Local lock instead of missusing mlock.
* ti,tmp007
  - Switch to device managed functions in probe.

Other
* MAINTAINERS
  - Move Peter Meerwald-Stadler to Credits at his request

----------------------------------------------------------------
Ahmad Fatoum (2):
      iio: st_sensors: fix typo in comment
      iio: adc: stm32-adc: enable timestamping for non-DMA usage

Alexandru Ardelean (30):
      iio: kfifo: add devm_iio_kfifo_buffer_setup() helper
      iio: make use of devm_iio_kfifo_buffer_setup() helper
      iio: accel: sca3000: use devm_iio_kfifo_buffer_setup() helper
      iio: kfifo: un-export devm_iio_kfifo_allocate() function
      iio: buffer-dma,adi-axi-adc: introduce devm_iio_dmaengine_buffer_setup()
      docs: ioctl-number.rst: reserve IIO subsystem ioctl() space
      iio: core: register chardev only if needed
      iio: core-trigger: make iio_device_register_trigger_consumer() an int return
      iio: core: rework iio device group creation
      iio: buffer: group attr count and attr alloc
      iio: core: merge buffer/ & scan_elements/ attributes
      iio: add reference to iio buffer on iio_dev_attr
      iio: buffer: wrap all buffer attributes into iio_dev_attr
      iio: buffer: dmaengine: obtain buffer object from attribute
      iio: core: wrap iio device & buffer into struct for character devices
      iio: buffer: move __iio_buffer_free_sysfs_and_mask() before alloc
      iio: dummy: iio_simple_dummy_buffer: use triggered buffer core calls
      iio: buffer: introduce support for attaching more IIO buffers
      iio: buffer: add ioctl() to support opening extra buffers for IIO device
      iio: core: rename 'dev' -> 'indio_dev' in iio_device_alloc()
      tools: iio: make iioutils_get_type() private in iio_utils
      tools: iio: privatize globals and functions in iio_generic_buffer.c file
      tools: iio: convert iio_generic_buffer to use new IIO buffer API
      iio: Documentation: update definitions for bufferY and scan_elements
      iio: adc: adi-axi-adc: fix typo in doc-string
      iio: kfifo: mask flags without zero-check in devm_iio_kfifo_buffer_setup()
      iio: buffer: fix use-after-free for attached_buffers array
      iio: temperature: tmp007: use device-managed functions in probe
      staging: iio: ad9834: convert to device-managed functions in probe
      iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant

Alexandru Tachici (1):
      iio: adc: ad7124: allow more than 8 channels

Andy Shevchenko (4):
      iio: chemical: bmp680: Drop unneeded explicit castings
      iio: imu: fxos8700: Drop unneeded explicit castings
      iio: imu: st_lsm6dsx: Drop unneeded explicit castings
      iio: light: gp2ap002: Drop unneeded explicit casting

Baruch Siach (1):
      staging: iio: remove mention of defunct list

Bhaskar Chowdhury (1):
      iio: proximity: sx9500: Fix a spelling postive to positive

Fabrice Gasnier (1):
      counter: stm32-lptimer-cnt: remove iio counter abi

Guoqing Chi (1):
      iio: adc: ad7292: Modify the bool initialization assignment

Gwendal Grignou (14):
      iio: hrtimer: Allow sub Hz granularity
      iio: Remove kernel-doc keyword in file header comment
      iio: set default trig->dev.parent
      iio: fix devm_iio_trigger_alloc with parent.cocci
      iio: adis_trigger: Remove code to set trigger parent
      iio: gp2ap020a00f: Remove code to set trigger parent
      iio: lmp91000: Remove code to set trigger parent
      iio: chemical: atlas: Remove code to set trigger parent
      iio: as3935: Remove code to set trigger parent
      iio: xilinx-xadc: Remove code to set trigger parent
      iio: cros: unify hw fifo attributes without API changes
      iio: acpi_als: Add timestamp channel
      iio: acpi_als: Add local variable dev in probe
      iio: acpi_als: Add trigger support

Hans de Goede (5):
      iio: core: Allow drivers to specify a label without it coming from of
      iio: accel: bmc150: Set label based on accel-location on 2-accel yoga-style 2-in-1s
      iio: accel: kxcjk-1013: Set label based on accel-location on 2-accel yoga-style 2-in-1s
      iio: documentation: Document proximity sensor label use
      iio: documentation: Document accelerometer label use

Ivan Mikhaylov (1):
      iio: proximity: vcnl3020: add proximity rate

Jonathan Cameron (13):
      iio:adc:stm32-adc: Add HAS_IOMEM dependency
      iio:ABI docs: Combine sysfs-bus-iio-humidity-hdc2010/hdc100x into one file
      iio:ABI docs: Combine the two instances of docs for sensor_sensitivity
      iio: pressure: zpa2326: kernel-doc fixes
      iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
      iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
      iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
      iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
      iio: adc: adi-axi-adc: Drop false marking for kernel-doc
      iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
      iio: buffer: kfifo_buf: kernel-doc, typo in function name.
      iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
      Merge remote-tracking branch 'local/ib-iio-scmi-5.12-rc2-take3' into togreg

Julia Lawall (1):
      iio: use getter/setter functions

Jyoti Bhayana (1):
      iio/scmi: Adding support for IIO SCMI Based Sensors

LI Qingwu (2):
      dt-bindings: iio: st,st-sensors add IIS2MDC.
      iio:magnetometer: Add Support for ST IIS2MDC

Lars-Peter Clausen (3):
      iio: iio_format_value(): Use signed temporary for IIO_VAL_FRACTIONAL_LOG2
      iio: iio_format_value(): Fix IIO_VAL_FRACTIONAL_LOG2 values between -1.0 and 0.0
      iio: Add basic unit test for iio_format_value()

Linus Walleij (4):
      iio: adc: mt6360: Include right header
      iio: Provide iio_read_channel_processed_scale() API
      hwmon: (ntc_thermistor): try reading processed
      iio: event_monitor: Enable events before monitoring

Luca Ceresoli (5):
      docs: iio: fix example formatting
      docs: iio: fix directory naming
      docs: iio: document the 'index' attribute too
      docs: iio: fix bullet list formatting
      docs: iio: mark "repeat" sysfs attribute as optional

Mike Looijmans (2):
      dt-bindings: iio: accel: Add bmi088 accelerometer bindings
      iio: accel: Add support for the Bosch-Sensortec BMI088

Mircea Caprioru (1):
      iio: dac: ad5686: Add support for AD5673R/AD5677R

Mugilraj Dhavachelvan (2):
      iio:dac:max517.c: Use devm_iio_device_register()
      staging: iio: ad9832: kernel-doc fixes

Nuno Sa (3):
      iio: adis16480: fix pps mode sampling frequency math
      iio: adis16475: improve sync scale mode handling
      iio: adis: add helpers for locking

Nuno Sá (1):
      dt-bindings: adis16475: remove property

Oleksij Rempel (2):
      dt-bindings: counter: add interrupt-counter binding
      counter: add IRQ or GPIO based counter

Peter Meerwald-Stadler (1):
      MAINTAINERS: iio: move Peter Meerwald-Stadler to CREDITS

Sean Nyekjaer (1):
      iio: accel: mma8452: fix indentation

Seiya Wang (1):
      dt-bindings: iio: adc: Add compatible for Mediatek MT8195

Sergiu Cuciurean (3):
      iio: adc: spear_adc: Replace indio_dev->mlock with own device lock
      iio: adc: palmas_gpadc: Replace indio_dev->mlock with own device lock
      iio: adc: npcm_adc: Replace indio_dev->mlock with own device lock

Stephen Boyd (3):
      platform/chrome: cros_ec: Add SW_FRONT_PROXIMITY MKBP define
      dt-bindings: iio: Add cros ec proximity yaml doc
      iio: proximity: Add a ChromeOS EC MKBP proximity driver

Tomislav Denis (2):
      iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
      bindings: iio: adc: Add documentation for ADS131E0x ADC driver

William Breathitt Gray (1):
      counter: 104-quad-8: Remove IIO counter ABI

Ye Xiang (6):
      iio: hid-sensor-rotation: Fix quaternion data not correct
      iio: hid-sensors: Move get sensitivity attribute to hid-sensor-common
      hid-sensors: Add more data fields for sensitivity checking
      iio: Add relative sensitivity support
      iio: hid-sensor-als: Add relative hysteresis support
      iio: Add relative hysteresis in ABI documentation

zuoqilin (1):
      iio:adc:dac:ad5791 typo fix of regster

 CREDITS                                            |   8 +
 Documentation/ABI/testing/sysfs-bus-iio            | 140 +++
 .../ABI/testing/sysfs-bus-iio-counter-104-quad-8   | 133 ---
 .../ABI/testing/sysfs-bus-iio-distance-srf08       |   8 -
 ...iio-humidity-hdc2010 => sysfs-bus-iio-humidity} |   3 +-
 .../ABI/testing/sysfs-bus-iio-humidity-hdc100x     |   9 -
 .../ABI/testing/sysfs-bus-iio-lptimer-stm32        |  62 --
 Documentation/ABI/testing/sysfs-bus-iio-proximity  |  14 +
 .../ABI/testing/sysfs-bus-iio-proximity-as3935     |   9 -
 .../bindings/counter/interrupt-counter.yaml        |  62 ++
 .../bindings/iio/accel/bosch,bmi088.yaml           |  68 ++
 .../bindings/iio/adc/mediatek,mt2701-auxadc.yaml   |   1 +
 .../devicetree/bindings/iio/adc/ti,ads131e08.yaml  | 181 ++++
 .../devicetree/bindings/iio/imu/adi,adis16475.yaml |   9 -
 .../proximity/google,cros-ec-mkbp-proximity.yaml   |  37 +
 .../devicetree/bindings/iio/st,st-sensors.yaml     |   1 +
 .../devicetree/bindings/mfd/google,cros-ec.yaml    |   7 +
 Documentation/driver-api/driver-model/devres.rst   |   3 +-
 Documentation/driver-api/iio/buffers.rst           |  15 +-
 Documentation/iio/iio_configfs.rst                 |   3 +-
 Documentation/userspace-api/ioctl/ioctl-number.rst |   1 +
 MAINTAINERS                                        |  22 +-
 drivers/counter/104-quad-8.c                       | 653 ++------------
 drivers/counter/Kconfig                            |  14 +-
 drivers/counter/Makefile                           |   1 +
 drivers/counter/interrupt-cnt.c                    | 244 ++++++
 drivers/counter/stm32-lptimer-cnt.c                | 297 +------
 drivers/firmware/arm_scmi/driver.c                 |   2 +-
 drivers/hwmon/ntc_thermistor.c                     |  27 +-
 drivers/iio/Kconfig                                |   1 +
 drivers/iio/Makefile                               |   1 +
 drivers/iio/accel/Kconfig                          |  18 +
 drivers/iio/accel/Makefile                         |   2 +
 drivers/iio/accel/adxl372.c                        |   2 -
 drivers/iio/accel/bma180.c                         |   3 +-
 drivers/iio/accel/bma220_spi.c                     |   2 +-
 drivers/iio/accel/bmc150-accel-core.c              |  19 +-
 drivers/iio/accel/bmi088-accel-core.c              | 567 ++++++++++++
 drivers/iio/accel/bmi088-accel-spi.c               |  83 ++
 drivers/iio/accel/bmi088-accel.h                   |  18 +
 drivers/iio/accel/cros_ec_accel_legacy.c           |   2 +-
 drivers/iio/accel/da280.c                          |   2 +-
 drivers/iio/accel/da311.c                          |   2 +-
 drivers/iio/accel/dmard10.c                        |   2 +-
 drivers/iio/accel/hid-sensor-accel-3d.c            |  23 +-
 drivers/iio/accel/kxcjk-1013.c                     |  16 +-
 drivers/iio/accel/mc3230.c                         |   2 +-
 drivers/iio/accel/mma7660.c                        |   2 +-
 drivers/iio/accel/mma8452.c                        |  47 +-
 drivers/iio/accel/mxc4005.c                        |   1 -
 drivers/iio/accel/sca3000.c                        |  27 +-
 drivers/iio/accel/ssp_accel_sensor.c               |  14 +-
 drivers/iio/accel/stk8312.c                        |   3 +-
 drivers/iio/accel/stk8ba50.c                       |   3 +-
 drivers/iio/adc/Kconfig                            |  13 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/ad7124.c                           | 459 ++++++----
 drivers/iio/adc/ad7292.c                           |   2 +-
 drivers/iio/adc/ad7606.c                           |   1 -
 drivers/iio/adc/ad7766.c                           |   1 -
 drivers/iio/adc/ad7768-1.c                         |   1 -
 drivers/iio/adc/ad_sigma_delta.c                   |   6 +-
 drivers/iio/adc/adi-axi-adc.c                      |  14 +-
 drivers/iio/adc/at91_adc.c                         |   3 +-
 drivers/iio/adc/cpcap-adc.c                        |   2 +-
 drivers/iio/adc/ina2xx-adc.c                       |  14 +-
 drivers/iio/adc/max1027.c                          |   1 -
 drivers/iio/adc/mt6360-adc.c                       |   3 +-
 drivers/iio/adc/npcm_adc.c                         |  15 +-
 drivers/iio/adc/palmas_gpadc.c                     |  18 +-
 drivers/iio/adc/spear_adc.c                        |  20 +-
 drivers/iio/adc/stm32-adc.c                        |  39 +-
 drivers/iio/adc/ti-adc084s021.c                    |   6 +-
 drivers/iio/adc/ti-ads131e08.c                     | 948 +++++++++++++++++++++
 drivers/iio/adc/ti_am335x_adc.c                    |  18 +-
 drivers/iio/adc/xilinx-xadc-core.c                 |   1 -
 drivers/iio/buffer/industrialio-buffer-dmaengine.c |  35 +-
 drivers/iio/buffer/industrialio-triggered-buffer.c |  10 +-
 drivers/iio/buffer/kfifo_buf.c                     |  45 +-
 drivers/iio/chemical/atlas-sensor.c                |   1 -
 drivers/iio/chemical/bme680_i2c.c                  |   3 +-
 drivers/iio/chemical/bme680_spi.c                  |   3 +-
 drivers/iio/chemical/ccs811.c                      |   1 -
 drivers/iio/chemical/scd30_core.c                  |   1 -
 drivers/iio/chemical/scd30_serial.c                |   2 +-
 drivers/iio/common/Kconfig                         |   1 +
 drivers/iio/common/Makefile                        |   1 +
 .../iio/common/cros_ec_sensors/cros_ec_lid_angle.c |   3 +-
 .../iio/common/cros_ec_sensors/cros_ec_sensors.c   |   3 +-
 .../common/cros_ec_sensors/cros_ec_sensors_core.c  |  33 +-
 .../iio/common/hid-sensors/hid-sensor-attributes.c |  83 +-
 .../iio/common/hid-sensors/hid-sensor-trigger.c    |   4 +-
 drivers/iio/common/scmi_sensors/Kconfig            |  18 +
 drivers/iio/common/scmi_sensors/Makefile           |   5 +
 drivers/iio/common/scmi_sensors/scmi_iio.c         | 672 +++++++++++++++
 drivers/iio/common/st_sensors/st_sensors_buffer.c  |   2 +-
 drivers/iio/common/st_sensors/st_sensors_trigger.c |   4 +-
 drivers/iio/dac/Kconfig                            |   5 +-
 drivers/iio/dac/ad5504.c                           |   2 +-
 drivers/iio/dac/ad5686.c                           |  12 +
 drivers/iio/dac/ad5686.h                           |   2 +
 drivers/iio/dac/ad5696-i2c.c                       |   6 +-
 drivers/iio/dac/ad5770r.c                          |   2 +-
 drivers/iio/dac/ad5791.c                           |   2 +-
 drivers/iio/dac/max517.c                           |  10 +-
 drivers/iio/dummy/iio_simple_dummy_buffer.c        |  68 +-
 drivers/iio/gyro/adxrs290.c                        |   1 -
 drivers/iio/gyro/bmg160_core.c                     |   2 -
 drivers/iio/gyro/fxas21002c_core.c                 |   1 -
 drivers/iio/gyro/hid-sensor-gyro-3d.c              |  19 +-
 drivers/iio/gyro/itg3200_buffer.c                  |   3 +-
 drivers/iio/gyro/ssp_gyro_sensor.c                 |  14 +-
 drivers/iio/health/afe4403.c                       |   1 -
 drivers/iio/health/afe4404.c                       |   1 -
 drivers/iio/health/max30100.c                      |  16 +-
 drivers/iio/health/max30102.c                      |  16 +-
 drivers/iio/humidity/am2315.c                      |   2 +-
 drivers/iio/humidity/hid-sensor-humidity.c         |  16 +-
 drivers/iio/humidity/hts221_buffer.c               |   1 -
 drivers/iio/iio_core.h                             |  32 +-
 drivers/iio/iio_core_trigger.h                     |   4 +-
 drivers/iio/imu/adis16400.c                        |  22 +-
 drivers/iio/imu/adis16475.c                        | 118 ++-
 drivers/iio/imu/adis16480.c                        | 133 ++-
 drivers/iio/imu/adis_trigger.c                     |  10 +-
 drivers/iio/imu/fxos8700_i2c.c                     |   3 +-
 drivers/iio/imu/fxos8700_spi.c                     |   3 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c  |  14 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c   |  13 +-
 drivers/iio/imu/kmx61.c                            |   1 -
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c     |  15 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c        |   3 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c        |   3 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c        |   3 +-
 drivers/iio/industrialio-buffer.c                  | 496 ++++++++---
 drivers/iio/industrialio-core.c                    | 132 ++-
 drivers/iio/industrialio-event.c                   |   6 +-
 drivers/iio/industrialio-trigger.c                 |  40 +-
 drivers/iio/inkern.c                               |  16 +-
 drivers/iio/light/acpi-als.c                       | 117 ++-
 drivers/iio/light/apds9960.c                       |  16 +-
 drivers/iio/light/cros_ec_light_prox.c             |   3 +-
 drivers/iio/light/gp2ap002.c                       |   3 +-
 drivers/iio/light/gp2ap020a00f.c                   |   1 -
 drivers/iio/light/hid-sensor-als.c                 |  34 +-
 drivers/iio/light/hid-sensor-prox.c                |  27 +-
 drivers/iio/light/opt3001.c                        |   2 +-
 drivers/iio/light/rpr0521.c                        |   1 -
 drivers/iio/light/si1145.c                         |   1 -
 drivers/iio/light/st_uvis25_core.c                 |   1 -
 drivers/iio/light/stk3310.c                        |   2 +-
 drivers/iio/light/vcnl4000.c                       |   1 -
 drivers/iio/light/vcnl4035.c                       |   1 -
 drivers/iio/magnetometer/bmc150_magn.c             |   1 -
 drivers/iio/magnetometer/hid-sensor-magn-3d.c      |  32 +-
 drivers/iio/magnetometer/rm3100-core.c             |   1 -
 drivers/iio/magnetometer/st_magn.h                 |   1 +
 drivers/iio/magnetometer/st_magn_core.c            |   1 +
 drivers/iio/magnetometer/st_magn_i2c.c             |   5 +
 drivers/iio/magnetometer/st_magn_spi.c             |   5 +
 drivers/iio/orientation/hid-sensor-incl-3d.c       |  20 +-
 drivers/iio/orientation/hid-sensor-rotation.c      |  37 +-
 .../iio/position/hid-sensor-custom-intel-hinge.c   |  20 +-
 drivers/iio/potentiometer/max5481.c                |   4 +-
 drivers/iio/potentiometer/max5487.c                |   4 +-
 drivers/iio/potentiostat/lmp91000.c                |   3 +-
 drivers/iio/pressure/cros_ec_baro.c                |   3 +-
 drivers/iio/pressure/hid-sensor-press.c            |  20 +-
 drivers/iio/pressure/zpa2326.c                     |   5 +-
 drivers/iio/proximity/Kconfig                      |  11 +
 drivers/iio/proximity/Makefile                     |   1 +
 drivers/iio/proximity/as3935.c                     |   1 -
 drivers/iio/proximity/cros_ec_mkbp_proximity.c     | 271 ++++++
 drivers/iio/proximity/sx9310.c                     |   1 -
 drivers/iio/proximity/sx9500.c                     |   3 +-
 drivers/iio/proximity/vcnl3020.c                   |  97 ++-
 drivers/iio/temperature/hid-sensor-temperature.c   |  16 +-
 drivers/iio/temperature/tmp007.c                   |  36 +-
 drivers/iio/test/Kconfig                           |   9 +
 drivers/iio/test/Makefile                          |   7 +
 drivers/iio/test/iio-test-format.c                 | 198 +++++
 drivers/iio/trigger/iio-trig-hrtimer.c             |  37 +-
 drivers/iio/trigger/iio-trig-interrupt.c           |   2 +-
 drivers/iio/trigger/iio-trig-loop.c                |   2 +-
 drivers/iio/trigger/iio-trig-sysfs.c               |   3 +-
 drivers/rtc/rtc-hid-sensor-time.c                  |   4 +-
 drivers/staging/iio/TODO                           |   4 -
 drivers/staging/iio/frequency/ad9832.c             |   4 +-
 drivers/staging/iio/frequency/ad9834.c             |  67 +-
 drivers/staging/iio/impedance-analyzer/ad5933.c    |  23 +-
 include/linux/hid-sensor-hub.h                     |   9 +-
 include/linux/hid-sensor-ids.h                     |   1 +
 include/linux/iio/adc/adi-axi-adc.h                |   2 +-
 include/linux/iio/buffer-dmaengine.h               |   7 +-
 include/linux/iio/buffer.h                         |   4 +-
 include/linux/iio/buffer_impl.h                    |  21 +-
 include/linux/iio/common/cros_ec_sensors_core.h    |   3 +-
 include/linux/iio/consumer.h                       |  15 +
 include/linux/iio/iio-opaque.h                     |  14 +
 include/linux/iio/iio.h                            |   7 +-
 include/linux/iio/imu/adis.h                       |  10 +
 include/linux/iio/kfifo_buf.h                      |  11 +-
 include/linux/iio/sysfs.h                          |   3 +
 include/linux/iio/trigger.h                        |   3 +-
 include/linux/iio/types.h                          |   1 +
 include/linux/platform_data/cros_ec_commands.h     |   1 +
 include/uapi/linux/iio/buffer.h                    |  10 +
 tools/iio/Makefile                                 |   1 +
 tools/iio/iio_event_monitor.c                      |  69 +-
 tools/iio/iio_generic_buffer.c                     | 153 +++-
 tools/iio/iio_utils.c                              |  18 +-
 tools/iio/iio_utils.h                              |   9 +-
 212 files changed, 5950 insertions(+), 2272 deletions(-)
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
 rename Documentation/ABI/testing/{sysfs-bus-iio-humidity-hdc2010 => sysfs-bus-iio-humidity} (79%)
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
 create mode 100644 Documentation/devicetree/bindings/counter/interrupt-counter.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
 create mode 100644 drivers/counter/interrupt-cnt.c
 create mode 100644 drivers/iio/accel/bmi088-accel-core.c
 create mode 100644 drivers/iio/accel/bmi088-accel-spi.c
 create mode 100644 drivers/iio/accel/bmi088-accel.h
 create mode 100644 drivers/iio/adc/ti-ads131e08.c
 create mode 100644 drivers/iio/common/scmi_sensors/Kconfig
 create mode 100644 drivers/iio/common/scmi_sensors/Makefile
 create mode 100644 drivers/iio/common/scmi_sensors/scmi_iio.c
 create mode 100644 drivers/iio/proximity/cros_ec_mkbp_proximity.c
 create mode 100644 drivers/iio/test/Kconfig
 create mode 100644 drivers/iio/test/Makefile
 create mode 100644 drivers/iio/test/iio-test-format.c
 create mode 100644 include/uapi/linux/iio/buffer.h



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux