Re: [PATCH v2 1/2] dt-bindings: iio: temperature: Add DT bindings for TMP117

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 01 Apr 2021 14:46:47 +0530, Puranjay Mohan wrote:
> Add devicetree binding document for TMP117, a digital temperature sensor.
> 
> Signed-off-by: Puranjay Mohan <puranjay12@xxxxxxxxx>
> ---
>  .../bindings/iio/temperature/ti,tmp117.yaml   | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/temperature/ti,tmp117.example.dts:21.13-26: Warning (reg_format): /example-0/tmp117@48:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/iio/temperature/ti,tmp117.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/temperature/ti,tmp117.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/temperature/ti,tmp117.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/temperature/ti,tmp117.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/temperature/ti,tmp117.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.example.dt.yaml: example-0: tmp117@48:reg:0: [72] is too short
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

See https://patchwork.ozlabs.org/patch/1460920

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux