Re: [PATCH 3/7] iio:adc:nau7802: Use IRQF_NO_AUTOEN instead of request then disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2 Apr 2021 20:12:13 +0000
"Song Bao Hua (Barry Song)" <song.bao.hua@xxxxxxxxxxxxx> wrote:

> > -----Original Message-----
> > From: Jonathan Cameron [mailto:jic23@xxxxxxxxxx]
> > Sent: Saturday, April 3, 2021 7:46 AM
> > To: linux-iio@xxxxxxxxxxxxxxx
> > Cc: Song Bao Hua (Barry Song) <song.bao.hua@xxxxxxxxxxxxx>; Jonathan Cameron
> > <jonathan.cameron@xxxxxxxxxx>; Alexandre Belloni
> > <alexandre.belloni@xxxxxxxxxxx>
> > Subject: [PATCH 3/7] iio:adc:nau7802: Use IRQF_NO_AUTOEN instead of request
> > then disable
> > 
> > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > 
> > Whilst a race during interrupt enabling is probably not a problem,
> > it is better to not enable the interrupt at all.  The new
> > IRQF_NO_AUTOEN flag allows us to do that.
> > 
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> > ---  
> 
> Reviewed-by: Barry Song <song.bao.hua@xxxxxxxxxxxxx>
Applied and pushed out as testing to let the autobuilders test it a bit.
Still time for others to respond though as I can rebase for at least the
next few days as I expect I'll do a pull request mid week.

Thanks,

Jonathan

> 
> >  drivers/iio/adc/nau7802.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c
> > index 07c85434b568..bb70b51d25b1 100644
> > --- a/drivers/iio/adc/nau7802.c
> > +++ b/drivers/iio/adc/nau7802.c
> > @@ -498,7 +498,8 @@ static int nau7802_probe(struct i2c_client *client,
> >  		ret = request_threaded_irq(client->irq,
> >  				NULL,
> >  				nau7802_eoc_trigger,
> > -				IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> > +				IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
> > +				IRQF_NO_AUTOEN,
> >  				client->dev.driver->name,
> >  				indio_dev);
> >  		if (ret) {
> > @@ -513,8 +514,7 @@ static int nau7802_probe(struct i2c_client *client,
> >  			dev_info(&client->dev,
> >  				"Failed to allocate IRQ, using polling mode\n");
> >  			client->irq = 0;
> > -		} else
> > -			disable_irq(client->irq);
> > +		}
> >  	}
> > 
> >  	if (!client->irq) {
> > --
> > 2.31.1  
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux