Linux IIO Development

• Thread Index

• Re: [PATCH 5/5] iio: imu: inv_mpu6050: new timestamp mechanism
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] iio: imu: inv_mpu6050: switch to use sample rate divider
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add Qualcomm SPMI PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: advertise max and min freqs
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 0/5] iio: imu: inv_mpu6050: add new timestamping mechanism
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v2] Add support for external reference voltage through the regulator framework
  • From: Silvan Murer <silvan.murer@xxxxxxxxx>
• Re: [PATCH 5/5] iio: imu: inv_mpu6050: new timestamp mechanism
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 4/5] iio: imu: inv_mpu6050: better fifo overflow handling
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 3/5] iio: imu: inv_mpu6050: fix fifo count reading
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 2/5] iio: imu: inv_mpu6050: switch to use sample rate divider
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: include stm32-dfsdm-adc.h
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] iio: dac: Add regulator framework to LTC2632 device driver
  • From: Silvan Murer <silvan.murer@xxxxxxxxx>
• [PATCH] iio: dac: fix missing of_match_table assignment in LTC2632 device
  • From: Silvan Murer <silvan.murer@xxxxxxxxx>
• [PATCH trivial] dt-bindings: iio: afe: Spelling s/mesaurement/measurement/
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 5/5] iio: imu: inv_mpu6050: new timestamp mechanism
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 4/5] iio: imu: inv_mpu6050: better fifo overflow handling
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 3/5] iio: imu: inv_mpu6050: fix fifo count reading
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 2/5] iio: imu: inv_mpu6050: switch to use sample rate divider
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 1/5] iio: imu: inv_mpu6050: replace timestamp fifo by generic timestamp
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 0/5] iio: imu: inv_mpu6050: add new timestamping mechanism
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• RFC: Drop the adis16060 gyro driver from staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: make loop a do-while
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dac: Add regulator framework to LTC2632 device driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: dac: Add regulator framework to LTC2632 device driver
  • From: Silvan Murer <silvan.murer@xxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: make loop a do-while
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v4] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: tsl2583: correct values in integration_time_available
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 4/4] staging:iio:meter: Drop ADE7759 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/4] staging:iio:meter: Drop ADE7754 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 3/4] staging:iio:meter: Drop ADE7758 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 1/4] staging:iio:meter: Drop ADE7753 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 0/4] staging:iio: Drop 4 meter drivers.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 9/9] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 9/9] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/9] staging: iio: tsl2x7x: rename driver to tsl2772
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/9] staging: iio: tsl2x7x: add range checking to tsl2x7x_write_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/9] staging: iio: tsl2x7x: correct IIO_EV_INFO_PERIOD values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/9] staging: iio: tsl2x7x: use macro to populate tsl2X7X_device_info
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/9] staging: iio: tsl2x7x: convert to use read_avail
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/9] staging: iio: tsl2x7x: turn chip off if IIO device registration fails
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/9] staging: iio: tsl2x7x: use direct returns
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/9] staging: iio: tsl2x7x: remove unnecessary whitespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads8688: add trigger and buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add Qualcomm SPMI PMIC5 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: potentiostat: lmp91000: add LMP91002 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: imu: inv_mpu6050: skip first sample when gyro is on
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: make loop a do-while
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/1] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of IIO new device support, features and cleanups for the 4.18 cycle
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/1] iio: accell: mma8452: Split long line Split Long Line
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 2/9] staging: iio: tsl2x7x: use direct returns
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 3/9] staging: iio: tsl2x7x: turn chip off if IIO device registration fails
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 4/9] staging: iio: tsl2x7x: use macro to populate tsl2X7X_device_info
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 5/9] staging: iio: tsl2x7x: convert to use read_avail
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 6/9] staging: iio: tsl2x7x: correct IIO_EV_INFO_PERIOD values
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 7/9] staging: iio: tsl2x7x: add range checking to tsl2x7x_write_raw
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 9/9] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 8/9] staging: iio: tsl2x7x: rename driver to tsl2772
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 1/9] staging: iio: tsl2x7x: remove unnecessary whitespace
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 0/9] staging: iio: tsl2x7x: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PULL] First set of IIO new device support, features and cleanups for the 4.18 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 1/9] MAINTAINERS: add generic resistive touchscreen adc
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 3/9] dt-bindings: input: touchscreen: add minimum pressure touchscreen property
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 2/9] iio: Add channel for Position Relative
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 5/9] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 7/9] dt-bindings: iio: adc: at91-sama5d2_adc: add channel specific consumer info
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 6/9] input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 8/9] ARM: dts: at91: sama5d2: add channel cells for ADC device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 9/9] ARM: dts: at91: sama5d2: Add resistive touch device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 4/9] dt-bindings: input: touchscreen: resistive-adc-touch: create bindings
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v5 0/9] Add support for SAMA5D2 touchscreen
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v3] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: adc: ti-ads8688: add trigger and buffer support
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• Re: [PULL] First set of IIO fixes for the 4.17 cycle.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 15/18] iio: iio.h: use nested struct support on kernel-doc markup
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH v3] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: Using LIBIIO sending DATA to DAC and capturing the output from DAC
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: Add IIO example to the kernelnewbies wiki
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: Using LIBIIO sending DATA to DAC and capturing the output from DAC
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: Add Qualcomm SPMI PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• Re: [PATCH 00/18] Fix some build warnings/errors with Sphinx
  • From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxxx>
• Re: [PATCH 00/18] Fix some build warnings/errors with Sphinx
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v2] iio: potentiostat: lmp91000: add LMP91002 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: imu: inv_mpu6050: skip first sample when gyro is on
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: make loop a do-while
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH v2] iio: potentiostat: lmp91000: add LMP91002 support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: input: touchscreen: add pressure threshold touchscreen property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221: Fix sensor reads after resume
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: stm32-adc: add support for STM32MP1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 15/18] iio: iio.h: use nested struct support on kernel-doc markup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO fixes for the 4.17 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 5/9] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/9] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 00/18] Fix some build warnings/errors with Sphinx
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 15/18] iio: iio.h: use nested struct support on kernel-doc markup
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v2] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v3] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/9] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v3] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH v3] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/9] Add support for SAMA5D2 touchscreen
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/11] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/11] staging: iio: tsl2x7x: rename driver to tsl2772
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/11] staging: iio: tsl2x7x: correct IIO_EV_INFO_PERIOD values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/11] staging: iio: tsl2x7x: add device ids for code readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/11] staging: iio: tsl2x7x: support 2.72 and 2.73 ALS increments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/11] staging: iio: tsl2x7x: correct integration time and lux equation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/11] staging: iio: tsl2x7x: use IIO_CONST_ATTR for calibscale_available
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/11] staging: iio: tsl2x7x: move calibscale_available attribute to IIO_INTENSITY channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/11] staging: iio: tsl2x7x: don't setup event handlers if interrupts are not configured
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/11] staging: iio: tsl2x7x: add range checking to three sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/11] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/9] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add support for STM32MP1 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: ti-dac5571: Add DT binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: add TI DAC5755 family support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/9] input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/9] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: make loop a do-while
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: inv_mpu6050: minor wording fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: imu: inv_mpu6050: fix user_ctrl register overwritten
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] iio: imu: inv_mpu6050: skip first sample when gyro is on
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: inv_mpu6050: fix possible deadlock between mutex and iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] iio: imu: inv_mpu6050: use i2c mux only for chip with i2c aux bus
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221: Fix sensor reads after resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: potentiometer: add driver for Maxim Integrated DS1807
  • From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/11] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 02/11] staging: iio: tsl2x7x: add range checking to three sysfs attributes
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 03/11] staging: iio: tsl2x7x: don't setup event handlers if interrupts are not configured
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 06/11] staging: iio: tsl2x7x: correct integration time and lux equation
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 07/11] staging: iio: tsl2x7x: support 2.72 and 2.73 ALS increments
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 09/11] staging: iio: tsl2x7x: correct IIO_EV_INFO_PERIOD values
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 08/11] staging: iio: tsl2x7x: add device ids for code readability
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 04/11] staging: iio: tsl2x7x: move calibscale_available attribute to IIO_INTENSITY channel
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 10/11] staging: iio: tsl2x7x: rename driver to tsl2772
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 11/11] staging: iio: tsl2x7x/tsl2772: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 05/11] staging: iio: tsl2x7x: use IIO_CONST_ATTR for calibscale_available
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 01/11] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 00/11] staging: iio: tsl2x7x: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/3] iio: adc: stm32-adc: add support for STM32MP1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/3] Add support for STM32MP1 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/2] iio: imu: inv_mpu6050: make loop a do-while
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH 1/2] iio: imu: inv_mpu6050: minor wording fixes
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH 0/2] inv_mpu6050 minor cleanup
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH 1/2] iio: dac: add TI DAC5755 family support
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH 2/2] iio: ti-dac5571: Add DT binding documentation
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH v4 0/9] Add support for SAMA5D2 touchscreen
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 1/9] MAINTAINERS: add generic resistive touchscreen adc
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 2/9] iio: Add channel for Position Relative
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 3/9] dt-bindings: input: touchscreen: add pressure threshold touchscreen property
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 4/9] dt-bindings: input: touchscreen: resistive-adc-touch: create bindings
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 6/9] input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 5/9] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 8/9] ARM: dts: at91: sama5d2: add channel cells for ADC device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 7/9] dt-bindings: iio: adc: at91-sama5d2_adc: add channel specific consumer info
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 9/9] ARM: dts: at91: sama5d2: Add resistive touch device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 4/4] iio: imu: inv_mpu6050: fix user_ctrl register overwritten
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 3/4] iio: imu: inv_mpu6050: skip first sample when gyro is on
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 2/4] iio: imu: inv_mpu6050: fix possible deadlock between mutex and iio
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 1/4] iio: imu: inv_mpu6050: use i2c mux only for chip with i2c aux bus
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH] iio: magnetometer: mag3110: Add ability to run in continuous mode
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH][for iio-for-4.17b] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• [PATCH] iio: accell: mma8452: Reduce sleep time when data not ready
  • From: Richard Tresidder <rtresidd@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] staging: iio: ad2s1200: Move driver out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/9] staging: iio: ad2s1200: Add scaling factor for angle channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/9] staging: iio: Documentation: Add missing sysfs docs for angle channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/9] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/9] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/9] staging: iio: ad2s1200: Replace platform data with dt bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/9] staging: iio: ad2s1200: Replace legacy gpio API with modern API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/9] staging: iio: ad2s1200: Improve readability with be16_to_cpup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/9] staging: iio: ad2s1200: Add kernel docs to driver state
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: afe: rescale: new driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: iio: afe: add binding for current-sense-amplifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: iio: afe: add binding for voltage-divider
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: iio: afe: add binding for current-sense-shunt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiostat: lmp91000: add LMP91002 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RESEND] iio: accel: bcm150: Remove handling for regmap raw_read_max
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: imu: inv_mpu6050: clean read channel data error path
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: imu: inv_mpu6050: clean read raw by factorizing out raw data
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/9] staging: iio: ad2s1200: Add documentation for device tree binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: stm32-dfsdm: add check on max filter id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: stm32-dfsdm: add check on spi-max-frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: adc: stm32-dfsdm: misc style improvements and fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/9] staging: iio: ad2s1200: Add documentation for device tree binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 5/9] staging: iio: ad2s1200: Add documentation for device tree binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: iio: afe: add binding for current-sense-amplifier
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: iio: afe: add binding for voltage-divider
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: potentiostat: lmp91000: add LMP91002 support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: potentiostat: lmp91000: add LMP91002 support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Patch process question
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: Patch process question
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Patch process question
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/2] iio: adc128s052: allow driver to be matched using ACPI
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc128s052: allow driver to be matched using ACPI
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH RESEND] iio: accel: bcm150: Remove handling for regmap raw_read_max
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [PATCH 0/3] stagging:iio:meter: Add essential IIO API structures for ADE7854
  • From: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
• Re: [PATCH v3 08/11] input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 08/11] input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 2/3] iio: adc128s052: add ACPI _HID AANT1280
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH v2 1/3] iio: adc128s052: Add pin-compatible IDs
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH v2 3/3] iio: adc128s052: reuse "compatible" for ACPI _DSD
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH v2 0/3] iio: adc128s052: add matching options
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: iio: afe: add binding for current-sense-shunt
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 3/4] dt-bindings: iio: afe: add binding for current-sense-amplifier
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 4/4] iio: afe: rescale: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: iio: afe: add binding for voltage-divider
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v4 0/4] iio: add unit-converter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v4 4/4] iio: imu: inv_mpu6050: clean read channel data error path
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v4 3/4] iio: imu: inv_mpu6050: clean read raw by factorizing out raw data
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v4 2/4] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v4 1/4] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] iio: adc: stm32-dfsdm: misc style improvements and fixes
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 9/9] staging: iio: ad2s1200: Move driver out of staging
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 8/9] staging: iio: ad2s1200: Add scaling factor for angle channel
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 7/9] staging: iio: Documentation: Add missing sysfs docs for angle channel
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 6/9] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 5/9] staging: iio: ad2s1200: Add documentation for device tree binding
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 4/9] staging: iio: ad2s1200: Replace platform data with dt bindings
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 3/9] staging: iio: ad2s1200: Replace legacy gpio API with modern API
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 2/9] staging: iio: ad2s1200: Improve readability with be16_to_cpup
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 1/9] staging: iio: ad2s1200: Add kernel docs to driver state
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v3 0/9] staging: iio: ad2s1200: Driver clean up
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel
  • From: David Julian Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH v2 10/13] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
  • From: David Julian Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH v2 08/13] staging: iio: ad2s1200: Replace legacy gpio API with modern API
  • From: David Julian Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH v2 07/13] staging: iio: ad2s1200: Improve readability with be16_to_cpup
  • From: David Julian Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH v2 06/13] staging: iio: ad2s1200: Introduce variable for repeated value
  • From: David Julian Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH v2 05/13] staging: iio: ad2s1200: Add kernel docs to driver state
  • From: David Julian Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH] iio: potentiostat: lmp91000: remove lookup table for temperature values
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc128s052: add ACPI _HID AANT1280
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc128s052: allow driver to be matched using ACPI
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [PATCH 3/3] stagging:iio:meter: Add ade7854_write_raw function
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH 3/3] stagging:iio:meter: Add ade7854_write_raw function
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH v7 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] stagging:iio:meter: Add ade7854_write_raw function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] stagging:iio:meter: Add ade7854_read_raw function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] stagging:iio:meter: Add iio_chan_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] stagging:iio:meter: Add essential IIO API structures for ADE7854
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 13/13] staging: iio: ad2s1200: Move driver out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 12/13] staging: iio: ad2s1200: Add scaling factor for angle channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/13] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/13] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v2 09/13] staging: iio: ad2s1200: Add documentation for device tree binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/13] staging: iio: ad2s1200: Replace legacy gpio API with modern API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/13] staging: iio: ad2s1200: Improve readability with be16_to_cpup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/13] staging: iio: ad2s1200: Introduce variable for repeated value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/13] staging: iio: ad2s1200: Add kernel docs to driver state
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/13] staging: iio: ad2s1200: Add blank lines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/13] staging: iio: ad2s1200: Reverse Christmas tree ordering
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/13] staging: iio: ad2s1200: Sort includes alphabetically
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/13] staging: iio: ad2s1200: Remove unneeded include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiostat: lmp91000: remove lookup table for temperature values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/13] staging: iio: tsl2x7x: use device defaults for als_time, prox_time and wait_time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/13] staging: iio: tsl2x7x: rename prox_config to als_prox_config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/13] staging: iio: tsl2x7x: various comment cleanups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/13] staging: iio: tsl2x7x: move power and diode settings into header file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/13] staging: iio: tsl2x7x: add range checking to three sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/13] staging: iio: tsl2x7x: simplify device id verification
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/13] staging: iio: tsl2x7x: simplify tsl2x7x_write_interrupt_config return
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/13] staging: iio: tsl2x7x: remove unnecessary chip status checks in suspend/resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/13] staging: iio: tsl2x7x: simplify tsl2x7x_clear_interrupts function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/13] staging: iio: tsl2x7x: don't return error in IRQ handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/13] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/13] staging: iio: tsl2x7x: move integration_time* attributes to IIO_INTENSITY channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 48/61] staging: iio: adc: simplify getting .drvdata
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 18/61] iio: common: cros_ec_sensors: simplify getting .drvdata
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 19/61] iio: common: hid-sensors: simplify getting .drvdata
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc128s052: add ACPI _HID AANT1280
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc128s052: allow driver to be matched using ACPI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: st_accel: Add support for the SMO8840 ACPI id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] iio: imu: inv_mpu6050: clean read channel data error path
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: imu: inv_mpu6050: clean read raw by factorizing out raw data
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: imu: inv_mpu6050: use set_power_itg function in i2c mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: imu: inv_mpu6050: clean set_power_itg and fix usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: mcp320x: Use vendor prefix compatible strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: select buffer for at91-sama5d2_adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/14] staging: iio: ad7746: Fix bound checkings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: afe: add current-sense-shunt and voltage-divider
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/3] stagging:iio:meter: Add ade7854_write_raw function
  • From: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
• [PATCH 2/3] stagging:iio:meter: Add ade7854_read_raw function
  • From: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
• [PATCH 1/3] stagging:iio:meter: Add iio_chan_spec
  • From: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
• [PATCH 0/3] stagging:iio:meter: Add essential IIO API structures for ADE7854
  • From: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
• [PATCH] iio: potentiostat: lmp91000: remove lookup table for temperature values
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 02/13] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 03/13] staging: iio: tsl2x7x: don't return error in IRQ handler
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 04/13] staging: iio: tsl2x7x: simplify tsl2x7x_clear_interrupts function
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 05/13] staging: iio: tsl2x7x: remove unnecessary chip status checks in suspend/resume
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 08/13] staging: iio: tsl2x7x: add range checking to three sysfs attributes
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 06/13] staging: iio: tsl2x7x: simplify tsl2x7x_write_interrupt_config return
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 07/13] staging: iio: tsl2x7x: simplify device id verification
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 09/13] staging: iio: tsl2x7x: move power and diode settings into header file
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 12/13] staging: iio: tsl2x7x: various comment cleanups
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 13/13] staging: iio: tsl2x7x: rename prox_config to als_prox_config
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 11/13] staging: iio: tsl2x7x: use device defaults for als_time, prox_time and wait_time
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 01/13] staging: iio: tsl2x7x: move integration_time* attributes to IIO_INTENSITY channel
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 00/13] iio: tsl2x7x: staging cleanups
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] iio: adc: ad799x: Fix error handling in ad799x_probe()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• [PATCH v2 13/13] staging: iio: ad2s1200: Move driver out of staging
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 12/13] staging: iio: ad2s1200: Add scaling factor for angle channel
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 10/13] staging: iio: ad2s1200: Add scaling factor for angular velocity channel
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 09/13] staging: iio: ad2s1200: Add documentation for device tree binding
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 08/13] staging: iio: ad2s1200: Replace legacy gpio API with modern API
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 07/13] staging: iio: ad2s1200: Improve readability with be16_to_cpup
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 06/13] staging: iio: ad2s1200: Introduce variable for repeated value
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 05/13] staging: iio: ad2s1200: Add kernel docs to driver state
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 04/13] staging: iio: ad2s1200: Add blank lines
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 03/13] staging: iio: ad2s1200: Reverse Christmas tree ordering
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 02/13] staging: iio: ad2s1200: Sort includes alphabetically
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 01/13] staging: iio: ad2s1200: Remove unneeded include
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• [PATCH v2 00/13] staging: iio: ad2s1200: Driver clean up
  • From: David Veenstra <davidjulianveenstra@xxxxxxxxx>
• Re: [PATCH v7 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v7 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v7 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  • From: Philipp Rossak <embed3d@xxxxxxxxx>
• Re: [PATCH v6 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v6 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v6 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  • From: Kyle Evans <kevans@xxxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  • From: Kyle Evans <kevans@xxxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [PATCH 00/61] tree-wide: simplify getting .drvdata
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 17/61] hid: simplify getting .drvdata
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 19/61] iio: common: hid-sensors: simplify getting .drvdata
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 18/61] iio: common: cros_ec_sensors: simplify getting .drvdata
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 48/61] staging: iio: adc: simplify getting .drvdata
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] ACPI match adc128s052 to ADC on UP Squared
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH 1/2] iio: adc128s052: allow driver to be matched using ACPI
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH 2/2] iio: adc128s052: add ACPI _HID AANT1280
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [PATCH v2 09/14] staging: iio: ad7746: Add remove()
  • From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
• Re: [PATCH v2 09/14] staging: iio: ad7746: Add remove()
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: stm32-adc: add support for STM32MP1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1.
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 3/3] ARM: dts: stm32: Add ADC support to stm32mp157c
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 0/3] Add support for STM32MP1 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v3 06/11] iio: inkern: add module put/get on iio dev module when requesting channels
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: accel: st_accel: Add support for the SMO8840 ACPI id
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 03/14] staging: iio: ad7746: Fix bound checkings
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 06/11] iio: inkern: add module put/get on iio dev module when requesting channels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: afe: unit-converter: new driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 03/11] iio: Add channel for Position Relative
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 18/20] spi: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 17/20] serial: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 06/11] iio: inkern: add module put/get on iio dev module when requesting channels
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v3 13/20] mmc: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 19/20] staging: vc04_services: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 12/20] media: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 05/20] firewire: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 07/20] i2c: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 14/20] mtd: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 06/20] fpga: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 16/20] remoteproc: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 02/20] ata: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 00/20] Allow compile-testing NO_DMA (drivers)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 11/20] mailbox: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v3 03/20] crypto: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 09/20] iommu: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 01/20] ASoC: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 04/20] fbdev: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 10/20] lightnvm: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 20/20] usb: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 08/20] iio: adc: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 15/20] net: Remove depends on HAS_DMA in case of platform dependency
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] iio: imu: inv_mpu6050: clean read channel data error path
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] iio: imu: inv_mpu6050: clean read raw by factorizing out raw data
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v3 06/11] iio: inkern: add module put/get on iio dev module when requesting channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] iio: Add channel for Position Relative
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v4 2/2] iio: imu: inv_mpu6050: use set_power_itg function in i2c mux
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v4 1/2] iio: imu: inv_mpu6050: clean set_power_itg and fix usage
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v3 06/11] iio: inkern: add module put/get on iio dev module when requesting channels
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: mcp320x: Use vendor prefix compatible strings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 11/14] staging: iio: ad7746: Add devicetree bindings documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: afe: add binding for adi,lt6106
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: mcp320x: Use vendor prefix compatible strings
  • From: Fabian Mewes <architekt@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/14] staging: iio: ad7746: Add devicetree bindings documentation
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/14] staging: iio: ad7746: Remove unused defines
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/14] staging: iio: ad7746: Fix bound checkings
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: afe: add current-sense-shunt and voltage-divider
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: afe: unit-converter: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] iio: adc: select buffer for at91-sama5d2_adc
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/2] iio: dac: add TI DAC5755 family support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/14] staging: iio: Remove ad7746 from staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 13/14] Move ad7746 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 07/11] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 06/11] iio: inkern: add module put/get on iio dev module when requesting channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/11] iio: Add channel for Position Relative
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/14] staging: iio: Remove ad7746 from staging
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 01/11] iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: sca3000: Handle errors returned by 'sca3000_configure_ring()' in 'sca3000_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: sca3000: Fix an error handling path in 'sca3000_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: inv_mpu6050: use set_power_itg function in i2c mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: imu: inv_mpu6050: clean set_power_itg and fix usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/7] iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v2 13/14] Move ad7746 out of staging
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 6/7] iio:dac:ad5686: Refactor the driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/7] iio:dac:ad5686: Add AD5672R/76/76R/84R/86R support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/7] iio:dac:ad5686: Add support for AD5685R
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/7] iio:dac:ad5686: Add support for various number of channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/7] iio:dac:ad5686: Change license description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/7] iio:dac:ad5686: Style fixes no functional changes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: Add mpu9255 support to mpu6050 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: imu: inv_mpu6050: clean read raw by factorizing out raw data
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio: add unit converter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: afe: unit-converter: new driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: mcp4531: switch to using .probe_new
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: potentiometer: mcp4018: switch to using .probe_new
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: do not flush fifo when iio buffer is full
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 13/14] Move ad7746 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/14] staging: iio: Remove ad7746 from staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 12/14] staging: iio: ad7746: Add ABI documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/14] staging: iio: ad7746: Add devicetree bindings documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/14] staging: iio: ad7746: Add comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/14] staging: iio: ad7746: Add remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/14] staging: iio: ad7746: Add dt-bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/14] staging: iio: ad7746: Remove unused defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/14] staging: iio: ad7746: Reorder variable declarations
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/14] staging: iio: ad7746: Reorder includes alphabetically
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/14] staging: iio: ad7746: Fix multiple line dereference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/14] staging: iio: ad7746: Fix bound checkings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/14] staging: iio: ad7746: Adjust arguments to match open parenthesis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/14] staging: iio: ad7746: Automatically swap values in readings/writings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: do not flush fifo when iio buffer is full
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH] iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: afe: add current-sense-shunt and voltage-divider
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v3 05/11] dt-bindings: input: touchscreen: resistive-adc-touch: create bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 04/11] dt-bindings: input: touchscreen: add pressure threshold touchscreen property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 00/14] Move ad7746 driver out of staging
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 01/14] staging: iio: ad7746: Automatically swap values in readings/writings
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 04/14] staging: iio: ad7746: Fix multiple line dereference
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 05/14] staging: iio: ad7746: Reorder includes alphabetically
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 06/14] staging: iio: ad7746: Reorder variable declarations
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 07/14] staging: iio: ad7746: Remove unused defines
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 10/14] staging: iio: ad7746: Add comments
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 11/14] staging: iio: ad7746: Add devicetree bindings documentation
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 12/14] staging: iio: ad7746: Add ABI documentation
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 13/14] Move ad7746 out of staging
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 14/14] staging: iio: Remove ad7746 from staging
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 09/14] staging: iio: ad7746: Add remove()
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 08/14] staging: iio: ad7746: Add dt-bindings
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 03/14] staging: iio: ad7746: Fix bound checkings
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 02/14] staging: iio: ad7746: Adjust arguments to match open parenthesis
  • From: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: do not flush fifo when iio buffer is full
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v3 0/2] iio: add unit converter
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: afe: add binding for adi,lt6106
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 0/2] iio: add unit converter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 2/2] iio: potentiometer: mcp4531: switch to using .probe_new
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 1/2] iio: potentiometer: mcp4018: switch to using .probe_new
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 1/7] iio:dac:ad5686: Style fixes no functional changes
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 3/7] iio:dac:ad5686: Add support for various number of channels
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 7/7] iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 6/7] iio:dac:ad5686: Refactor the driver
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 5/7] iio:dac:ad5686: Add AD5672R/76/76R/84R/86R support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 4/7] iio:dac:ad5686: Add support for AD5685R
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 2/7] iio:dac:ad5686: Change license description
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v2 6/6] iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 6/6] iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 5/6] iio:dac:ad5686: Refactor the driver
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 4/6] iio:dac:ad5686: Add AD5672R/76/76R/84R/86R support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 3/6] iio:dac:ad5686: Add support for AD5685R
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 2/6] iio:dac:ad5686: Add support for various number of channels
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 1/6] iio:dac:ad5686: Style fixes no functional changes
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: afe: add current-sense-shunt and voltage-divider
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 2/2] iio: afe: unit-converter: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 0/2] iio: add unit converter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: afe: add current-sense-cuicuit and voltage-divider
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Add support for SAMA5D2 touchscreen
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: afe: add current-sense-cuicuit and voltage-divider
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: add unit converter
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 02/11] MAINTAINERS: add generic resistive touchscreen adc
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 01/11] iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 03/11] iio: Add channel for Position Relative
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 04/11] dt-bindings: input: touchscreen: add pressure threshold touchscreen property
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 06/11] iio: inkern: add module put/get on iio dev module when requesting channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 05/11] dt-bindings: input: touchscreen: resistive-adc-touch: create bindings
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 08/11] input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 07/11] iio: adc: at91-sama5d2_adc: add support for position and pressure channels
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 11/11] ARM: dts: at91: sama5d2: Add resistive touch device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 10/11] ARM: dts: at91: sama5d2: add channel cells for ADC device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v3 09/11] dt-bindings: iio: adc: at91-sama5d2_adc: add channel specific consumer info
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 00/11] Add support for SAMA5D2 touchscreen
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• [RFC PATCH v2 2/2] iio: ti-dac5571: Add DT binding documentation
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [RFC PATCH v2 1/2] iio: dac: add TI DAC5755 family support
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• Re: [PATCH v2 00/10] Add support for SAMA5D2 touchscreen
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Add support of Wiegand card reader
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: dt: iio: imu: st_lsm6dsx: add ism330dlc sensor device binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v5 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v5 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v4 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v2 08/10] dt-bindings: iio: adc: at91-sama5d2_adc: add channel specific consumer info
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: input: touchscreen: touch_adc: create bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 4/4] iio: imu: inv_mpu6050: clean read channel data error path
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] iio: imu: inv_mpu6050: clean read raw by factorizing out raw data
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Add support of Wiegand card reader
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: afe: add current-sense-cuicuit and voltage-divider
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: Add mpu9255 support to mpu6050 driver
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: imu: inv_mpu6050: use set_power_itg function in i2c mux
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] iio: imu: inv_mpu6050: clean set_power_itg and fix usage
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: sca3000: Handle errors returned by 'sca3000_configure_ring()' in 'sca3000_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v2 1/2] iio: sca3000: Fix an error handling path in 'sca3000_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: afe: add current-sense-cuicuit and voltage-divider
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: afe: unit-converter: new driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: afe: add current-sense-cuicuit and voltage-divider
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: Add mpu9255 support to mpu6050 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: sca3000: Handle errors returned by 'sca3000_configure_ring()' in 'sca3000_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: sca3000: Fix an error handling path in 'sca3000_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] Documentation: dt: iio: imu: st_lsm6dsx: add ism330dlc sensor device binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ism330dlc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: rewrite and clean read raw for channel data
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: use devm_* at init and delete remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: inv_mpu6050: clean set_power_itg and fix usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: fix FIFO threshold mask for LSM6DSM/LSM6DSL
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Moving ad2s90 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v4 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v3 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH v2 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH 2/2] dt-bindings: iio:imu:mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH 1/2] iio:imu: inv_mpu6050: support more interrupt types
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio:dac:ad5686: Add AD5672R/AD5676/AD5676R/AD5684R/AD5685R/AD5686R support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3] imu: inv_mpu6050: interpolate missing timestamps
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 07/10] input: touchscreen: touch_adc: add generic resistive ADC touchscreen
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 5/8] counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 1/8] counter: Introduce the Generic Counter interface
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>