Re: [PATCH v2 3/4] iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/16/2018 06:41 AM, Jonathan Cameron wrote:
On Wed, 12 Sep 2018 19:39:19 -0500
David Lechner <david@xxxxxxxxxxxxxx> wrote:

This changes how the SPI message for the triggered buffer is setup in
the TI ADS7950 A/DC driver. By using the SPI_CS_WORD flag, we can read
multiple samples in a single SPI transfer. If the SPI controller
supports DMA transfers, we can see a significant reduction in CPU usage.

For example, on an ARM9 system running at 456MHz reading just 4 channels
at 100Hz: before this change, top shows the CPU usage of the IRQ thread
of this driver to be ~7.7%. After this change, the CPU usage drops to
~3.8%.

Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>

Hi David,

I've managed to forget why we are changing any of the endian related code
at all.  The change SPI_CS_WORD result in changes between words which is
fine but it doesn't change any ordering within words?  So as such why
do we no longer need to do the big endian conversions?


The big-endian stuff was cargo culted from another driver when this driver
was originally written. It used an SPI word size of 8 bits and big-endian
byte ordering to effectively emulate 16 bit words.

Now, in order to inject a CS toggle between each word, we need to use the
correct word size, otherwise we would get a CS toggle half way through
each word 16-bit. The SPI subsystem uses CPU byte ordering for multi-byte
words. So, the data we get back from the SPI is going to be CPU endian now
no matter what. Converting that to big endian will just add overhead on
little endian systems.



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux