Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- [PATCH v4 3/8] iio: adc: mp2629: restrict input voltage mask for mp2629, (continued)
- [PATCH v6] iio: temperature: Add driver support for Maxim MAX30208,
Rajat Khandelwal
- [PULL] First set of Counter fixes for 6.1 cycle,
William Breathitt Gray
- [PATCH v5 0/3] iio: Support ROHM/Kionix kx022a,
Matti Vaittinen
- [PATCH] dt-bindings: iio: adc: renesas,rcar-gyroadc: Miscellaneous improvements,
Geert Uytterhoeven
- [PATCH -next] iio: trigger: sysfs: rename error label in iio_sysfs_trigger_probe(),
Yang Yingliang
- [PATCH v3] iio: temperature: mlx90632 Style alignment for the driver,
Crt Mori
- [PATCH v2] iio: temperature: mlx90632 Style alignment for the driver, Crt Mori
- [PATCH] iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger(),
Yang Yingliang
- [PATCH] iio: temperature: mlx90632 Style alignment for the driver,
Crt Mori
- [PATCH v3] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value,
Rajat Khandelwal
- [PATCH v5] iio: temperature: Add driver support for Maxim MAX30208,
Rajat Khandelwal
- [PATCH 00/23] iio: accel: Convert to i2c's .probe_new,
Uwe Kleine-König
- [PATCH 07/23] iio: accel: dmard06: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 22/23] iio: accel: st_magn: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 06/23] iio: accel: da311: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 09/23] iio: accel: dmard10: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 19/23] iio: accel: mxc6255: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 05/23] iio: accel: da280: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 15/23] iio: accel: mma8452: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 08/23] iio: accel: dmard09: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 18/23] iio: accel: mxc4005: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 23/23] iio: accel: vl6180: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 02/23] iio: accel: adxl372: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 20/23] iio: accel: stk8312: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 11/23] iio: accel: kxsd9: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 03/23] iio: accel: bma400: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 13/23] iio: accel: mma7455: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 04/23] iio: accel: bmc150: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 12/23] iio: accel: mc3230: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 01/23] iio: accel: adxl367: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 14/23] iio: accel: mma7660: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 21/23] iio: accel: stk8ba50: Convert to i2c's .probe_new(), Uwe Kleine-König
- [PATCH 16/23] iio: accel: mma9551: Convert to i2c's .probe_new, Uwe Kleine-König
- [PATCH 17/23] iio: accel: mma9553: Convert to i2c's .probe_new, Uwe Kleine-König
- [PULL] 1st set of IIO fixes for 6.1,
Jonathan Cameron
- [PATCH] iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init(),
Yang Yingliang
- [PATCH 00/21] ARM: s3c: clean out obsolete platforms,
Arnd Bergmann
- [PATCH v2 0/3] ms5611 sensor value bug fix; dt-binding fix,
Mitja Spes
- [PATCH v4 0/3] iio: Support ROHM/Kionix kx022a,
Matti Vaittinen
- [PATCH v10 0/2] AD4130,
Cosmin Tanislav
- [PATCH] counter: 104-quad-8: Fix race getting function mode and direction,
William Breathitt Gray
- [PATCH v2 0/2] iio: adc: sun4i-gpadc-iio: Fix error handle in sun4i_gpadc_probe(),
Zhang Qilong
- Re: [PATCH v3 0/3] iio: Support ROHM/Kionix kx022a,
Matti Vaittinen
- [PATCH v3 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer,
Matti Vaittinen
- [PATCH v3 3/3] MAINTAINERS: Add KX022A maintainer entry, Matti Vaittinen
- [PATCH v3 1/3] dt-bindings: iio: Add KX022A accelerometer,
Matti Vaittinen
- [PATCH] iio: adc: at91-sama5d2_adc: get rid of 5 degrees Celsius adjustment,
Claudiu Beznea
- [PATCH v2 0/5] Support more parts in LTC2983,
Cosmin Tanislav
- [PATCH v4] iio: temperature: Add driver support for Maxim MAX30208,
Rajat Khandelwal
- [PATCH v3] iio: temperature: Add driver support for Maxim MAX30208, Rajat Khandelwal
- [PATCH 1/2] iio: adc: mt6577_auxadc: add optional 32k clock,
Daniel Golle
- [PATCH 1/3] iio: pressure: ms5611: fixed value compensation bug,
Mitja Spes
- [PATCH] staging: iio: Use div64_ul instead of do_div,
Kang Minchul
- [PATCH v2] counter: microchip-tcb-capture: Handle Signal1 read and Synapse,
William Breathitt Gray
- [PATCH v2] iio: temperature: Add driver support for Maxim MAX30208,
Rajat Khandelwal
- [PATCH] counter: microchip-tcb-capture: Handle Signal1 read and Synapse,
William Breathitt Gray
- [PATCH 00/10] spi: Add support for stacked/parallel memories,
Amit Kumar Mahapatra
- [PATCH 01/10] spi: Add stacked memories support in SPI core, Amit Kumar Mahapatra
- [PATCH 02/10] spi: Replace all spi->chip_select & spi->cs_gpiod references with array, Amit Kumar Mahapatra
- [PATCH 03/10] net: Replace spi->chip_select references to spi->chip_select[0], Amit Kumar Mahapatra
- [PATCH 04/10] mtd: devices: Replace spi->chip_select references to spi->chip_select[0], Amit Kumar Mahapatra
- [PATCH 05/10] iio: imu: Replace spi->chip_select references to spi->chip_select[0], Amit Kumar Mahapatra
- [PATCH 06/10] mtd: spi-nor: Add stacked memories support in spi-nor, Amit Kumar Mahapatra
- [PATCH 07/10] spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver, Amit Kumar Mahapatra
- [PATCH 08/10] spi: Add parallel memories support in SPI core, Amit Kumar Mahapatra
- [PATCH 09/10] mtd: spi-nor: Add parallel memories support in spi-nor, Amit Kumar Mahapatra
- [PATCH 10/10] spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver, Amit Kumar Mahapatra
- [PATCH] staging: iio: frequency: ad9834: merge unnecessary split lines,
Deepak R Varma
- [PATCH v6 00/13] Add support for AXP192 PMIC,
Aidan MacDonald
- [PATCH v6 01/13] dt-bindings: mfd: add bindings for AXP192 MFD device, Aidan MacDonald
- [PATCH v6 02/13] dt-bindings: iio: adc: axp209: Add AXP192 compatible, Aidan MacDonald
- [PATCH v6 05/13] mfd: axp20x: Add support for AXP192, Aidan MacDonald
- [PATCH v6 03/13] dt-bindings: power: supply: axp20x: Add AXP192 compatible, Aidan MacDonald
- [PATCH v6 04/13] dt-bindings: power: axp20x-battery: Add AXP192 compatible, Aidan MacDonald
- [PATCH v6 06/13] regulator: axp20x: Add support for AXP192, Aidan MacDonald
- [PATCH v6 07/13] iio: adc: axp20x_adc: Minor code cleanups, Aidan MacDonald
- [PATCH v6 08/13] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field, Aidan MacDonald
- [PATCH v6 10/13] power: supply: axp20x_usb_power: Add support for AXP192, Aidan MacDonald
- [PATCH v6 09/13] iio: adc: axp20x_adc: Add support for AXP192, Aidan MacDonald
- [PATCH v6 11/13] power: axp20x_battery: Add constant charge current table, Aidan MacDonald
- [PATCH v6 12/13] power: axp20x_battery: Support battery status without fuel gauge, Aidan MacDonald
- [PATCH v6 13/13] power: axp20x_battery: Add support for AXP192, Aidan MacDonald
- Re: [PATCH v6 00/13] Add support for AXP192 PMIC, Aidan MacDonald
- Re: [PATCH v6 00/13] Add support for AXP192 PMIC, Jonathan Cameron
- Re: [PATCH v6 0/13] Add support for AXP192 PMIC, Alex Bee
- [PATCH 0/5] iio: adc: cc10001: Devm conversion,
Jonathan Cameron
- [PATCH 00/14] IIO: More devm_regulator[_bulk]_get_enable() users,
Jonathan Cameron
- [PATCH 01/14] iio: accel: adxl367: Use devm_regulator_bulk_get_enable(), Jonathan Cameron
- [PATCH 02/14] iio: accel: bma400: Use devm_regulator_bulk_get_enable(), Jonathan Cameron
- [PATCH 03/14] iio: accel: fxls8962af: Use devm_regulator_get_enable(), Jonathan Cameron
- [PATCH 04/14] iio: accel: kxcjk-1013: Use devm_regulator_bulk_get_enable(), Jonathan Cameron
- [PATCH 05/14] iio: accel: msa311: Use devm_regulator_get_enable(), Jonathan Cameron
- [PATCH 06/14] iio: cdc: ad7150: Use devm_regulator_get_enable(), Jonathan Cameron
- [PATCH 07/14] iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable(), Jonathan Cameron
- [PATCH 08/14] iio: frequency: ad9523: Use devm_regulator_get_enable(), Jonathan Cameron
- [PATCH 09/14] iio: humidity: hts211: Use devm_regulator_get_enable(), Jonathan Cameron
- [PATCH 10/14] iio: light: ltr501: Use devm_regulator_bulk_get_enable(), Jonathan Cameron
- [PATCH 11/14] iio: light: noa1305: Use devm_regulator_get_enable(), Jonathan Cameron
- [PATCH 12/14] iio: proximity: sx_common: Use devm_regulator_bulk_get_enable(), Jonathan Cameron
- [PATCH 13/14] iio: pressure: ms5611: Use devm_regulator_get_enable(), Jonathan Cameron
- [PATCH 14/14] iio: pressure: ms5611: Switch to fully devm_ managed registration., Jonathan Cameron
- RE: [PATCH 00/14] IIO: More devm_regulator[_bulk]_get_enable() users, Sa, Nuno
- Removing the last of IIO_COUNT (stm32-timer-trigger),
William Breathitt Gray
- Handling Signal1 in microchip-tcb-capture,
William Breathitt Gray
- [PATCH] dt-bindings: Remove "status" from schema examples, again,
Rob Herring
- Re: [PATCH] dt-bindings: Remove "status" from schema examples, again, Krzysztof Kozlowski
- Re: [PATCH] dt-bindings: Remove "status" from schema examples, again, Jonathan Cameron
- Re: [PATCH] dt-bindings: Remove "status" from schema examples, again, Vinod Koul
- Re: [PATCH] dt-bindings: Remove "status" from schema examples, again, Nicolas Ferre
- Re: [PATCH] dt-bindings: Remove "status" from schema examples, again, Thierry Reding
- Re: [PATCH] dt-bindings: Remove "status" from schema examples, again, Rob Herring
- [PATCH 0/3] Support more parts in LTC2983,
Cosmin Tanislav
- [PATCH] iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler(),
Dan Carpenter
- [PATCH] §tools: iio: iio_generic_buffer: Fix read size,
Matti Vaittinen
- [PATCH] tools: iio: iio_utils: fix digit calculation,
Matti Vaittinen
- [PATCH v3 0/4] Make 'mlock' really private,
Nuno Sá
- [PATCH] iio: temperature: Add driver support for Maxim MAX30208,
Rajat Khandelwal
- [PATCH] counter: ti-ecap-capture: fix IS_ERR() vs NULL check,
Dan Carpenter
- [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13,
Olivier Moysan
- [PATCH v4 2/8] dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles, Olivier Moysan
- [PATCH v4 1/8] iio: adc: stm32-adc: fix channel sampling time init, Olivier Moysan
- [PATCH v4 3/8] iio: adc: stm32-adc: add stm32mp13 support, Olivier Moysan
- [PATCH v4 8/8] ARM: dts: stm32: add adc support on stm32mp135f-dk, Olivier Moysan
- [PATCH v4 5/8] ARM: dts: stm32: add adc support to stm32mp13, Olivier Moysan
- [PATCH v4 4/8] iio: adc: stm32: manage min sampling time on all internal channels, Olivier Moysan
- [PATCH v4 7/8] ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk, Olivier Moysan
- [PATCH v4 6/8] ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk, Olivier Moysan
- Re: [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13, Andy Shevchenko
- Re: [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13, Fabrice Gasnier
- Re: [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13, Alexandre TORGUE
- [PATCH] iio: adc: mcp3911: Fix out of bounds access of array mcp3911_osr_table,
Colin Ian King
- [linux-next:master] BUILD REGRESSION b9f85101cad3397ef1e509909602a90e257ab9d8, kernel test robot
- [PATCH v2] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value,
Rajat Khandelwal
- [PATCH v14 0/3] Add MediaTek MT6370 PMIC support,
ChiaEn Wu
- [PATCH] iio: adc: mcp3911: mask out device ID in debug prints,
Marcus Folkesson
- [PATCH] iio: adc: mcp3911: use correct id bits,
Marcus Folkesson
- [PATCH] Change the I2C slave address for ds4422/4424 to its correct value,
Rajat Khandelwal
- [linux-next:master] BUILD REGRESSION cd9fd78f5c11b5e165d9317ef11e613f4aef4dd1, kernel test robot
- [PATCH v4 3/4] mfd: Add RZ/G2L MTU3 counter driver,
Biju Das
- [PATCH] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_device_set_enable routine,
Lorenzo Bianconi
- [PATCH v5] iio: pressure: mpl115: Implementing low power mode by shutdown gpio,
Rajat Khandelwal
- [linux-next:master] BUILD REGRESSION 082fce125e57cff60687181c97f3a8ee620c38f5, kernel test robot
- [RFC PATCH v2 0/5] iio: Support ROHM/Kionix kx022a,
Matti Vaittinen
- [PATCH v9 0/2] AD4130,
Cosmin Tanislav
- [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver,
Biju Das
- [PATCH v3 0/8] iio: stm32-adc: add support of adc for stm32mp13,
Olivier Moysan
- [PATCH v2 0/8] iio: stm32-adc: add support of adc for stm32mp13,
Olivier Moysan
- [PATCH v13 0/5] Add MediaTek MT6370 PMIC support,
ChiaEn Wu
- [PATCH 1/2] dt-bindings: iio: dac: change ad5766 maintainer,
Nuno Sá
- [PATCH v2 00/16] Make 'mlock' really private,
Nuno Sá
- [PATCH v2 09/16] iio: adc: vf610_adc: add helper function to read samples, Nuno Sá
- [PATCH v2 08/16] iio: adc: sc27xx_adc: do not use internal iio_dev lock, Nuno Sá
- [PATCH v2 10/16] iio: adc: vf610_adc: vf610_adc: do not use internal iio_dev lock, Nuno Sá
- [PATCH v2 11/16] iio: common: scmi_iio: do not use internal iio_dev lock, Nuno Sá
- [PATCH v2 12/16] iio: gyro: itg3200_core: do not use internal iio_dev lock, Nuno Sá
- [PATCH v2 15/16] iio: health: max30102: do not use internal iio_dev lock, Nuno Sá
- [PATCH v2 14/16] iio: health: max30100: do not use internal iio_dev lock, Nuno Sá
- [PATCH v2 13/16] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs, Nuno Sá
- [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque', Nuno Sá
[PATCH v1 1/2] dt-bindings:iio:adc: add documentation for TI LMP92064 controller,
Leonard Göhrs
[PATCH 1/8] dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml,
Krzysztof Kozlowski
- [PATCH 2/8] dt-bindings: iio: addac: adi,ad74413r: improve example, Krzysztof Kozlowski
- [PATCH 3/8] dt-bindings: iio: frequency: use spi-peripheral-props.yaml, Krzysztof Kozlowski
- [PATCH 4/8] dt-bindings: iio: gyroscope: use spi-peripheral-props.yaml, Krzysztof Kozlowski
- [PATCH 5/8] dt-bindings: iio: imu: adi,adis16475: use spi-peripheral-props.yaml, Krzysztof Kozlowski
- [PATCH 6/8] dt-bindings: iio: pressure: use spi-peripheral-props.yaml, Krzysztof Kozlowski
- [PATCH 7/8] dt-bindings: iio: proximity: ams,as3935: use spi-peripheral-props.yaml, Krzysztof Kozlowski
- [PATCH 8/8] dt-bindings: iio: resolver: adi,ad2s90: use spi-peripheral-props.yaml, Krzysztof Kozlowski
- Re: [PATCH 1/8] dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml, Rob Herring
[PATCH 0/2] Add support for the AD5754 DAC,
Ciprian Regus
[PATCH v8 0/3] iio: adc: add max11410 adc driver,
Ibrahim Tilki
[PATCH 2/2] iio: addac: add AD74115 driver,
Cosmin Tanislav
[PATCH 1/2] dt-bindings: iio: addac: add AD74115,
Cosmin Tanislav
[PATCH v7 0/3] iio: adc: add max11410 adc driver,
Ibrahim Tilki
[PATCH v3 00/10] iio: Fix unsafe buffer attributes,
Matti Vaittinen
- [PATCH v3 01/10] iio: adxl367: Fix unsafe buffer attributes, Matti Vaittinen
- [PATCH v3 02/10] iio: adxl372: Fix unsafe buffer attributes, Matti Vaittinen
- [PATCH v3 03/10] iio: bmc150-accel-core: Fix unsafe buffer attributes, Matti Vaittinen
- [PATCH v3 04/10] iio: at91-sama5d2_adc: Fix unsafe buffer attributes, Matti Vaittinen
- [PATCH v3 05/10] iio: Add IIO_STATIC_CONST_DEVICE_ATTR, Matti Vaittinen
- [PATCH v3 06/10] iio: adxl367: Use IIO_STATIC_CONST_DEVICE_ATTR(), Matti Vaittinen
- [PATCH v3 07/10] iio: adxl372: Use IIO_STATIC_CONST_DEVICE_ATTR(), Matti Vaittinen
- [PATCH v3 08/10] iio: bmc150-accel-core: Use IIO_STATIC_CONST_DEVICE_ATTR(), Matti Vaittinen
- [PATCH v3 09/10] iio: at91-sama5d2_adc: Use IIO_STATIC_CONST_DEVICE_ATTR(), Matti Vaittinen
- [RFT PATCH v3 10/10] iio: Don't silently expect attribute types, Matti Vaittinen
[PATCH v4] iio: pressure: mpl115: Implementing low power mode by shutdown gpio,
Rajat Khandelwal
[PATCH v3] iio: pressure: mpl115: Implementing low power mode by shutdown gpio, Rajat Khandelwal
[PATCH] iio: imu: bno055: Fix some uninitialized variable usage, Jonathan Cameron
[PATCH] iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.,
Jonathan Cameron
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]