On Sat, Sep 22, 2018 at 03:46:58PM +0100, Jonathan Cameron wrote:
> On Tue, 18 Sep 2018 16:24:21 +0800
> Song Qiang <songqiang1304521@xxxxxxxxx> wrote:
>
> > This driver was originally written by ST in 2016 as a misc input device
> > driver, and hasn't been maintained for a long time. I grabbed some code
> > from it's API and reformed it into an iio proximity device driver.
> > This version of driver uses i2c bus to talk to the sensor and
> > polling for measuring completes, so no irq line is needed.
> > It can be tested with reading from
> > /sys/bus/iio/devices/iio:deviceX/in_distance_input
> >
> > Signed-off-by: Song Qiang <songqiang1304521@xxxxxxxxx>
> There are a few bits and bobs in here, but as they are all minor and
> one at least was me giving you wrong advise, I've fixed it up.
>
> Please check I haven't made a mess of it!
>
> Applied with changes to the togreg branch of iio.git and pushed out
> as testing (where it should be visible now) for the autobuilders to
> play with it.
The SPDX license identifier is inconsistent!
> +// SPDX-License-Identifier: GPL-2.0+
> +MODULE_LICENSE("GPL v2");
216 For 'GNU General Public License (GPL) version 2 only' use:
217 SPDX-License-Identifier: GPL-2.0
218 For 'GNU General Public License (GPL) version 2 or any later version' use:
219 SPDX-License-Identifier: GPL-2.0+
--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology
