On Tue, 2 Oct 2018 15:34:46 +0300 Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote: > From: Paul Cercueil <paul.cercueil@xxxxxxxxxx> > > This change adds support for the ADA4961 BiCMOS RF Digital Gain Amplifier, > (DGA), which is optimized for driving heavy loads out 2.0 GHz and beyond. > The device typically achieves -90 dBc IMD3 performance at 500 MHz and > -85 dBc at 1.5 GHz. > > Datasheet link: > http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4961.pdf > > This change re-uses the existing ad8366 driver, as most logic is similar. > > Signed-off-by: Paul Cercueil <paul.cercueil@xxxxxxxxxx> > Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> One naming related comment inline. Otherwise this looks good. Thanks, Jonathan > --- > drivers/iio/amplifiers/Kconfig | 9 ++- > drivers/iio/amplifiers/ad8366.c | 100 +++++++++++++++++++++++++------- > 2 files changed, 84 insertions(+), 25 deletions(-) > > diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig > index e9c5f2cd9257..db7ebf3effc8 100644 > --- a/drivers/iio/amplifiers/Kconfig > +++ b/drivers/iio/amplifiers/Kconfig > @@ -6,12 +6,15 @@ > menu "Amplifiers" > > config AD8366 > - tristate "Analog Devices AD8366 VGA" > + tristate "Analog Devices AD8366 and similar SPI Gain Amplifiers" > depends on SPI > select BITREVERSE > help > - Say yes here to build support for Analog Devices AD8366 > - SPI Dual-Digital Variable Gain Amplifier (VGA). > + Say yes here to build support for Analog Devices AD8366 and similar > + gain amplifiers. This driver supports the following gain amplifiers > + from Analog Devices: > + AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA) > + ADA4961 SPI BiCMOS RF Digital Gain Amplifier (DGA) > > To compile this driver as a module, choose M here: the > module will be called ad8366. > diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c > index 4b76b61ba4be..04396c23e067 100644 > --- a/drivers/iio/amplifiers/ad8366.c > +++ b/drivers/iio/amplifiers/ad8366.c > @@ -1,7 +1,10 @@ > /* > - * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA) > + * AD8366 and similar SPI Gain Amplifiers > + * This driver supports the following gain amplifiers: > + * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA) > + * ADA4961 SPI BiCMOS RF Digital Gain Amplifier (DGA) > * > - * Copyright 2012 Analog Devices Inc. > + * Copyright 2012-2018 Analog Devices Inc. > * > * Licensed under the GPL-2. > */ > @@ -19,10 +22,17 @@ > #include <linux/iio/iio.h> > #include <linux/iio/sysfs.h> > > +enum ad8366_type { > + ID_AD8366, > + ID_ADA4961, > +}; > + > struct ad8366_state { > struct spi_device *spi; > struct regulator *reg; > unsigned char ch[2]; > + enum ad8366_type type; > + > /* > * DMA (thus cache coherency maintenance) requires the > * transfer buffers to live in their own cache lines. > @@ -36,13 +46,20 @@ static int ad8366_write(struct iio_dev *indio_dev, > struct ad8366_state *st = iio_priv(indio_dev); > int ret; > > - ch_a = bitrev8(ch_a & 0x3F); > - ch_b = bitrev8(ch_b & 0x3F); > + switch (st->type) { > + case ID_AD8366: > + ch_a = bitrev8(ch_a & 0x3F); > + ch_b = bitrev8(ch_b & 0x3F); > > - st->data[0] = ch_b >> 4; > - st->data[1] = (ch_b << 4) | (ch_a >> 2); > + st->data[0] = ch_b >> 4; > + st->data[1] = (ch_b << 4) | (ch_a >> 2); > + break; > + case ID_ADA4961: > + st->data[0] = ch_a & 0x1F; > + break; > + } > > - ret = spi_write(st->spi, st->data, ARRAY_SIZE(st->data)); > + ret = spi_write(st->spi, st->data, indio_dev->num_channels); > if (ret < 0) > dev_err(&indio_dev->dev, "write failed (%d)", ret); > > @@ -57,15 +74,23 @@ static int ad8366_read_raw(struct iio_dev *indio_dev, > { > struct ad8366_state *st = iio_priv(indio_dev); > int ret; > - unsigned code; > + int code; > > mutex_lock(&indio_dev->mlock); > switch (m) { > case IIO_CHAN_INFO_HARDWAREGAIN: > code = st->ch[chan->channel]; > > + switch (st->type) { > + case ID_AD8366: > + code = code * 253 + 4500; > + break; > + case ID_ADA4961: > + code = 15000 - code * 1000; > + break; > + } > + > /* Values in dB */ > - code = code * 253 + 4500; > *val = code / 1000; > *val2 = (code % 1000) * 1000; > > @@ -86,19 +111,24 @@ static int ad8366_write_raw(struct iio_dev *indio_dev, > long mask) > { > struct ad8366_state *st = iio_priv(indio_dev); > - unsigned code; > + int code; > int ret; > > - if (val < 0 || val2 < 0) > - return -EINVAL; > - > /* Values in dB */ > - code = (((u8)val * 1000) + ((u32)val2 / 1000)); > + code = (((s8)val * 1000) + ((s32)val2 / 1000)); > > - if (code > 20500 || code < 4500) > - return -EINVAL; > - > - code = (code - 4500) / 253; > + switch (st->type) { > + case ID_AD8366: > + if (code > 20500 || code < 4500) > + return -EINVAL; > + code = (code - 4500) / 253; > + break; > + case ID_ADA4961: > + if (code > 15000 || code < -6000) > + return -EINVAL; > + code = (15000 - code) / 1000; > + break; > + } > > mutex_lock(&indio_dev->mlock); > switch (mask) { > @@ -132,6 +162,10 @@ static const struct iio_chan_spec ad8366_channels[] = { > AD8366_CHAN(1), > }; > > +static const struct iio_chan_spec ada4961_channels[] = { > + AD8366_CHAN(0), > +}; > + > static int ad8366_probe(struct spi_device *spi) > { > struct iio_dev *indio_dev; > @@ -155,11 +189,32 @@ static int ad8366_probe(struct spi_device *spi) > st->spi = spi; > > indio_dev->dev.parent = &spi->dev; > - indio_dev->name = spi_get_device_id(spi)->name; > + > + /* try to get a unique name */ This isn't actually meant to be a unique name as such. It's meant to reflect the device part number. There are other ways to get uniqueness such as using the parent device to identify it. Note we didn't always get this right so unfortunately there are some drivers not following this convention, that we can't now fix as it would be a userspace ABI breaking change... > + if (spi->dev.platform_data) > + indio_dev->name = spi->dev.platform_data; > + else if (spi->dev.of_node) > + indio_dev->name = spi->dev.of_node->name; > + else > + indio_dev->name = spi_get_device_id(spi)->name; > + > + st->type = spi_get_device_id(spi)->driver_data; > + switch (st->type) { > + case ID_AD8366: > + indio_dev->channels = ad8366_channels; > + indio_dev->num_channels = ARRAY_SIZE(ad8366_channels); > + break; > + case ID_ADA4961: > + indio_dev->channels = ada4961_channels; > + indio_dev->num_channels = ARRAY_SIZE(ada4961_channels); > + break; > + default: > + dev_err(&spi->dev, "Invalid device ID\n"); > + return -EINVAL; > + } > + > indio_dev->info = &ad8366_info; > indio_dev->modes = INDIO_DIRECT_MODE; > - indio_dev->channels = ad8366_channels; > - indio_dev->num_channels = ARRAY_SIZE(ad8366_channels); > > ret = ad8366_write(indio_dev, 0 , 0); > if (ret < 0) > @@ -193,7 +248,8 @@ static int ad8366_remove(struct spi_device *spi) > } > > static const struct spi_device_id ad8366_id[] = { > - {"ad8366", 0}, > + {"ad8366", ID_AD8366}, > + {"ada4961", ID_ADA4961}, > {} > }; > MODULE_DEVICE_TABLE(spi, ad8366_id);
