On Mon, 15 Oct 2018 20:27:09 -0700
Martin Kelly <martin@xxxxxxxxxxxxxxxx> wrote:
> From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
>
> Miscellaneous cleanup to fix minor consistency, grammar, and spelling
> issues.
>
> Signed-off-by: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> v2:
> - Explicit return, eliminating goto st_sensors_match_odr_error.
>
> drivers/iio/common/st_sensors/st_sensors_core.c | 3 +--
> drivers/iio/common/st_sensors/st_sensors_trigger.c | 4 ++--
> drivers/iio/magnetometer/st_magn_core.c | 6 +++---
> 3 files changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> index 26fbd1bd9413..e50c975250e9 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -133,7 +133,7 @@ static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
>
> for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
> if (sensor_settings->fs.fs_avl[i].num == 0)
> - goto st_sensors_match_odr_error;
> + return ret;
>
> if (sensor_settings->fs.fs_avl[i].num == fs) {
> *index_fs_avl = i;
> @@ -142,7 +142,6 @@ static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
> }
> }
>
> -st_sensors_match_odr_error:
> return ret;
> }
>
> diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
> index fdcc5a891958..224596b0e189 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
> @@ -104,7 +104,7 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p)
> return IRQ_HANDLED;
>
> /*
> - * If we are using egde IRQs, new samples arrived while processing
> + * If we are using edge IRQs, new samples arrived while processing
> * the IRQ and those may be missed unless we pick them here, so poll
> * again. If the sensor delivery frequency is very high, this thread
> * turns into a polled loop handler.
> @@ -148,7 +148,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
> if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
> dev_err(&indio_dev->dev,
> "falling/low specified for IRQ "
> - "but hardware only support rising/high: "
> + "but hardware supports only rising/high: "
> "will request rising/high\n");
> if (irq_trig == IRQF_TRIGGER_FALLING)
> irq_trig = IRQF_TRIGGER_RISING;
> diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
> index 72f6d1335a04..880c11c7f1cb 100644
> --- a/drivers/iio/magnetometer/st_magn_core.c
> +++ b/drivers/iio/magnetometer/st_magn_core.c
> @@ -29,9 +29,9 @@
> #define ST_MAGN_NUMBER_DATA_CHANNELS 3
>
> /* DEFAULT VALUE FOR SENSORS */
> -#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0X03
> -#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0X07
> -#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0X05
> +#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0x03
> +#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0x07
> +#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0x05
>
> /* FULLSCALE */
> #define ST_MAGN_FS_AVL_1300MG 1300
> --
> 2.11.0
>
