In the future we may support two different channel sets: - one which includes the voltage pads and the temperature sensor output (for Meson8, Meson8b and Meson8m2) - one which only includes the voltage pads (GXBB, GXL, GXM and AXG) Channel 7 has a special function on all of these platforms. However, since we will have different channel array definitions we want our code to always use whatever channels struct iio_dev uses. No functional changes for now. This is the preparation for adding temperature sensor support to this driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- drivers/iio/adc/meson_saradc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 1c4ba83c0725..809d1230be34 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -854,7 +854,7 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev) meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_DIV4); usleep_range(10, 20); ret = meson_sar_adc_get_sample(indio_dev, - &meson_sar_adc_iio_channels[7], + &indio_dev->channels[7], MEAN_AVERAGING, EIGHT_SAMPLES, &value0); if (ret < 0) goto out; @@ -862,7 +862,7 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev) meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_MUL3_DIV4); usleep_range(10, 20); ret = meson_sar_adc_get_sample(indio_dev, - &meson_sar_adc_iio_channels[7], + &indio_dev->channels[7], MEAN_AVERAGING, EIGHT_SAMPLES, &value1); if (ret < 0) goto out; -- 2.19.0
