On Sat, 22 Sep 2018 23:28:04 +0800
Song Qiang <songqiang1304521@xxxxxxxxx> wrote:
> On Sat, Sep 22, 2018 at 03:46:58PM +0100, Jonathan Cameron wrote:
> > On Tue, 18 Sep 2018 16:24:21 +0800
> > Song Qiang <songqiang1304521@xxxxxxxxx> wrote:
> >
> > > This driver was originally written by ST in 2016 as a misc input device
> > > driver, and hasn't been maintained for a long time. I grabbed some code
> > > from it's API and reformed it into an iio proximity device driver.
> > > This version of driver uses i2c bus to talk to the sensor and
> > > polling for measuring completes, so no irq line is needed.
> > > It can be tested with reading from
> > > /sys/bus/iio/devices/iio:deviceX/in_distance_input
> > >
> > > Signed-off-by: Song Qiang <songqiang1304521@xxxxxxxxx>
> > There are a few bits and bobs in here, but as they are all minor and
> > one at least was me giving you wrong advise, I've fixed it up.
> >
> > Please check I haven't made a mess of it!
> >
> > Applied with changes to the togreg branch of iio.git and pushed out
> > as testing (where it should be visible now) for the autobuilders to
> > play with it.
> >
> > Thanks,
> >
> > Jonathan
> > > ---
>
> > > + indio_dev->name = "vl53l0x";
> > > + indio_dev->info = &vl53l0x_info;
> > > + indio_dev->channels = vl53l0x_channels;
> > > + indio_dev->num_channels = ARRAY_SIZE(vl53l0x_channels);
> > > + indio_dev->modes = INDIO_DIRECT_MODE;
> > > +
> > > + return devm_iio_device_register(&client->dev, indio_dev);
> > > +}
> > > +
> > > +static const struct of_device_id st_vl53l0x_dt_match[] = {
> > > + { .compatible = "st,vl53l0x-i2c", },
> >
> > Ah, this suffers from the same thing that was picked up in a driver
> > you sent later in the week. No need to have -i2c in the compatible
> > as this is clear from the bus type.
> >
> > (I might just fix this up).
> >
>
> Hi Jonathan,
>
> Sorry for the newbie mistakes you and Himanshu pointed out, I'm just
> writing them down on my little checklist!
> I just checked the code, found that this compatible string was not
> getting corrected in the DT binding doc file, sorry that you have
> to help correct my mistakes, thanks a lot!
Fixed up (and this was my mistake - we all make them - that's what review
is for!)
Thanks,
Jonathan
>
> yours,
> Song Qiang
>
> > > + { }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, st_vl53l0x_dt_match);
> > > +
> > > +static struct i2c_driver vl53l0x_driver = {
> > > + .driver = {
> > > + .name = "vl53l0x-i2c",
> > > + .of_match_table = st_vl53l0x_dt_match,
> > > + },
> > > + .probe_new = vl53l0x_probe,
> > > +};
> > > +module_i2c_driver(vl53l0x_driver);
> > > +
> > > +MODULE_AUTHOR("Song Qiang <songqiang1304521@xxxxxxxxx>");
> > > +MODULE_DESCRIPTION("ST vl53l0x ToF ranging sensor driver");
> > > +MODULE_LICENSE("GPL v2");
> >
