Linux IIO Development

• Thread Index

• Questions about the contributing process
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH V2] staging: iio: adc: ad7280a: check for devm_kasprint() failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Inconsistent SMO8840 accelerometer data between Windows and Linux
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Inconsistent SMO8840 accelerometer data between Windows and Linux
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221: add entry in MAINTAINERS file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/7] staging:iio:ad2s90: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/7] staging:iio:ad2s90: Add comment to device state mutex
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/7] staging:iio:ad2s90: Replace license text w/ SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/7] staging:iio:ad2s90: Add max frequency check at probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/7] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/7] staging:iio:ad2s90: Remove spi setup that should be done via dt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/7] staging:iio:ad2s90: Add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: Add gain & filter gpio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: snap timestamp closer to event
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 1/2] staging: iio: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7780: Add gain & filter gpio support
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• Re: [PATCH] staging: iio: ad7780: Add gain & filter gpio support
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7780: Add gain & filter gpio support
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 2/2] staging: iio: ad7780: Moving ad7780 out of staging
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH 1/2] staging: iio: ad7780: Add gain & filter gpio support
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH 0/2] staging: iio: ad7780: move out of staging
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: add STMPE ADC driver using IIO framework
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: add STMPE ADC devicetree bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH V2] staging: iio: adc: ad7280a: check for devm_kasprint() failure
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: Add gain & filter gpio support
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: Fix the sleep time for sampling
  • From: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx>
• Inconsistent SMO8840 accelerometer data between Windows and Linux
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH v3 4/7] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: bmi160: use all devm functions in probe
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: snap timestamp closer to event
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: Add gain & filter gpio support
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: check for devm_kasprint() failure
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: check for devm_kasprint() failure
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: check for devm_kasprint() failure
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: check for devm_kasprint() failure
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: stm32-adc: move self-calibration to prepare routine
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] staging: iio: adc: ad7280a: check for devm_kasprint() failure
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• [PATCH] iio: humidity: hts221: add entry in MAINTAINERS file
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v3 7/7] staging:iio:ad2s90: Move out of staging
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: chemical: sps30: add device tree support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH] iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Add the "KXJ2109" ACPI HID
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-hub: clean up indentation, remove extraneous tab
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: snap timestamp closer to event
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: bmi160: use all devm functions in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: Fix the sleep time for sampling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: stm32-adc: switch off running adc when going to low power
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: stm32-adc: add power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: stm32-adc: move self-calibration to prepare routine
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: stm32-adc: move self-calibration to prepare routine
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add driver for TLA202x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] Staging: iio: adt7316: Use device tree data to assign irq_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] Staging: iio: adt7316: Change the name from irq_flags to irq_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] Staging: iio: adt7316: Switch irq_flags to a local variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] Staging: iio: adt7316: Use device tree data to set ldac_pin
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] Staging: iio: adt7316: Add of_device_id table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7606: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: Add gain & filter gpio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Add the "KXJ2109" ACPI HID
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: replaced kfifo by triggered_buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 1/1] iio: adc: meson-saradc: fix internal clock names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: meson-saradc: check for devm_kasprintf failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: add STMPE ADC driver using IIO framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: add STMPE ADC devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad5933: add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/7] staging:iio:ad2s90: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Add the "KXJ2109" ACPI HID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: chemical: sps30: add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] iio: chemical: sps30: add device tree support
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 0/3] add support for Sensirion SPS30 PM sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH] iio: accel: kxcjk-1013: Add the "KXJ2109" ACPI HID
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2] staging: iio: ad5933: add device tree support
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: finalized device-tree support
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: finalized device-tree support
  • From: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
• [PATCH v3 1/7] staging:iio:ad2s90: Add device tree support
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 2/7] staging:iio:ad2s90: Remove spi setup that should be done via dt
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 3/7] staging:iio:ad2s90: Add max frequency check at probe
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 4/7] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 6/7] staging:iio:ad2s90: Add comment to device state mutex
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 7/7] staging:iio:ad2s90: Move out of staging
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 5/7] staging:iio:ad2s90: Replace license text w/ SPDX identifier
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 0/7] staging:iio:ad2s90: Add dt support and move out of staging
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH] staging: iio: ad5933: finalized device-tree support
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH v3 3/4] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH v3 2/4] iio: adc: add STMPE ADC driver using IIO framework
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH 0/1] meson-saradc: fix internal clock names
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/1] iio: adc: meson-saradc: fix internal clock names
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: meson-saradc: check for devm_kasprintf failure
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH] staging: iio: ad5933: replaced kfifo by triggered_buffer
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad7780: Add gain & filter gpio support
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PULL] First round of new device support, features, cleanups etc for IIO in the 4.21 cycle.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of IIO fixes for 4.20
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adc: meson-saradc: check for devm_kasprintf failure
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• [PULL] First round of new device support, features, cleanups etc for IIO in the 4.21 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO fixes for 4.20
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] staging:iio:ad2s90: Add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging: iio: ad7780: Add gain & filter gpio support
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• Re: [PATCH v2 5/5] Staging: iio: adt7316: Use device tree data to assign irq_type
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v2 5/5] Staging: iio: adt7316: Use device tree data to assign irq_type
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: Fix the sleep time for sampling
  • From: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx>
• Re: [PATCH v2 1/7] staging:iio:ad2s90: Add device tree support
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 4/7] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v3 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• [PATCH v2 5/5] Staging: iio: adt7316: Use device tree data to assign irq_type
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 4/5] Staging: iio: adt7316: Change the name from irq_flags to irq_type
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 3/5] Staging: iio: adt7316: Switch irq_flags to a local variable
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 2/5] Staging: iio: adt7316: Use device tree data to set ldac_pin
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 1/5] Staging: iio: adt7316: Add of_device_id table
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 0/5] Remove platform data and introduce DT bindings
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 1/2] staging: iio: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v3 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• [PATCH v3 0/2] Add support for Microchip MCP41xxx/42xxx potentiometers
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• [PATCH] iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/3] iio: adc: stm32-adc: switch off running adc when going to low power
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/3] iio: adc: stm32-adc: move self-calibration to prepare routine
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/3] iio: adc: stm32-adc: add power management support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 0/3] iio: stm32-adc: add PM support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] iio: Add driver for TLA202x ADCs
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: snap timestamp closer to event
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: snap timestamp closer to event
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH] iio: Add driver for TLA202x ADCs
  • From: Ibtsam Ul-Haq <ibtsam.haq.0x01@xxxxxxxxx>
• RE: [PATCH] iio: st_sensors: Fix the sleep time for sampling
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH v2 2/4] iio: adc: add STMPE ADC driver using IIO framework
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH v2 2/4] iio: adc: add STMPE ADC driver using IIO framework
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH v2 3/4] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• Re: Buffers and sampling frequency
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 2/2] iio: bmi160: use all devm functions in probe
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 1/2] iio: bmi160: snap timestamp closer to event
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 3/7] staging:iio:ad2s90: Add max frequency check at probe
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 1/7] staging:iio:ad2s90: Add device tree support
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 0/2] tscadc: Couple of fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] iio: st_sensors: Fix the sleep time for sampling
  • From: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx>
• [PATCH 2/2] iio: bmi160: use all devm functions in probe
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] iio: bmi160: snap timestamp closer to event
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH] iio: hid-sensor-hub: clean up indentation, remove extraneous tab
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH v2 1/7] staging:iio:ad2s90: Add device tree support
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 4/7] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 5/7] staging:iio:ad2s90: Replace license text w/ SPDX identifier
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 6/7] staging:iio:ad2s90: Add comment to device state mutex
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 7/7] staging:iio:ad2s90: Move out of staging
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 3/7] staging:iio:ad2s90: Add max frequency check at probe
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 2/7] staging:iio:ad2s90: Remove spi setup that should be done via dt
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v2 0/7] staging:iio:ad2s90: Add dt support and move out of staging
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: Buffers and sampling frequency
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 7/7] Staging: iio: adt7316: Use device tree data to assign irq_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] Staging: iio: adt7316: Use device tree data to set ldac_pin
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/7] Staging: iio: adt7316: Add of_device_id table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/7] Staging: iio: adt7316: Set the data field
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Buffers and sampling frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] dt-bindings: iio: adc: Add docs for ad7124
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio: ad_sigma_delta: Allow to provide custom data register address
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• [PATCH 7/7] Staging: iio: adt7316: Use device tree data to assign irq_type
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH 6/7] Staging: iio: adt7316: Change the name from irq_flags to irq_type
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH 5/7] Staging: iio: adt7316: Switch irq_flags to a local variable
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH 4/7] Staging: iio: adt7316: Use device tree data to set ldac_pin
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH 3/7] Staging: iio: adt7316: Add of_device_id table
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v5 4/4] dt-bindings: iio: adc: Add docs for ad7124
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/7] Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH 1/7] Staging: iio: adt7316: Set the data field
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH 0/7] Remove platform data and introduce DT bindings
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: Buffers and sampling frequency
  • From: "Medenblik, H.J.W. (Henk)" <henk.medenblik@xxxxxx>
• Re: [PATCH v5 4/4] dt-bindings: iio: adc: Add docs for ad7124
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] iio: adc: Add ad7124 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] staging:iio:ad2s90: Remove spi setup that should be done via dt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: add STMPE ADC devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Adding IIO list archives to lore.kernel.org
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: vadc: Add unit address to ADC channel node in example
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: vadc: Add unit address to ADC channel node in example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Buffers and sampling frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] staging: iio: ad7816: Add device tree table.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer mcp4131: use spi_get_device_id() only when needed
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 0/2] Use OF API to get the driver data
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer mcp4131: use spi_get_device_id() only when needed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: potentiometer: mcp4131: use of_device_get_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Use OF API to get the driver data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Questions related to some drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: potentiometer mcp4131: use spi_get_device_id() only when needed
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 1/2] iio: potentiometer: mcp4131: use of_device_get_match_data()
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 0/2] Use OF API to get the driver data
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 2/6] staging:iio:ad2s90: Remove spi setup that should be done via dt
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v4 4/4] staging: iio: ad7816: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add STMPE ADC driver using IIO framework
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v4 4/4] staging: iio: ad7816: Add device tree table.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v6 0/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [PATCH v4 4/4] staging: iio: ad7816: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v4 0/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Buffers and sampling frequency
  • From: David Frey <dpfrey@xxxxxxxxx>
• Re: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v3 4/4] staging: iio: ad7816: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v3 4/4] staging: iio: ad7816: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: Questions related to some drivers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• [PATCH v2 0/2] Add support for Microchip MCP41xxx/42xxx potentiometers
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: Questions related to some drivers
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• [PATCH v5 3/4] iio: adc: Add ad7124 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v5 4/4] dt-bindings: iio: adc: Add docs for ad7124
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v5 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v5 1/4] iio: ad_sigma_delta: Allow to provide custom data register address
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v6 2/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: vadc: Add unit address to ADC channel node in example
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 0/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: Adding IIO list archives to lore.kernel.org
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v4 4/4] dt-bindings: iio: adc: Add docs for ad7124
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4 1/2] staging: iio: ad7780: update voltage on read
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v6 2/2] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v2 0/9] add i2c controller support to st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] staging: iio: adc: ad7280a: power down the device on error in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 0/9] add i2c controller support to st_lsm6dsx driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 8/9] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/9] iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio: imu: st_lsm6dsx: add i2c embedded controller support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/9] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/9] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/9] iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/9] iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/9] iio: imu: st_lsm6dsx: introduce locked read/write utility routines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Add ADC data conversion timeout
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add STMPE ADC driver using IIO framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v6 2/2] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v6 0/2] staging: iio: adc: ad7280a: use devm API when applicable
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v6 1/2] staging: iio: adc: ad7280a: power down the device on error in probe
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: add STMPE ADC devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: add STMPE ADC devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: convert to SPDX identifiers
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Work plan on ad5933
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Add ADC data conversion timeout
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/7] add i2c controller support to st_lsm6dsx driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/3] iio: magnetometer: Add DT support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: Add PNI to the vendor prefixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 8/9] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 6/9] iio: imu: st_lsm6dsx: add i2c embedded controller support
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 7/9] iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 5/9] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 4/9] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 3/9] iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 2/9] iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 1/9] iio: imu: st_lsm6dsx: introduce locked read/write utility routines
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2 0/9] add i2c controller support to st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: st-accel: add support for lis3de
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/2] iio: light: Add support for vishay vcnl4035
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rcar-gyroadc: convert to SPDX identifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max11100: convert to SPDX identifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: convert to SPDX identifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] staging: iio: ad7780: generates pattern_mask from PAT bits
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] IIO: extend dac/MCP4922 to MCP49x1 devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Add ADC data conversion timeout
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] staging: iio: ad7816: Add device tree table.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] staging: iio: ad7816: Set RD/WR pin and CONVST pin as outputs.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] staging: iio: ad7816: Do not use busy_pin in case of AD7818
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] dt-bindings: iio: adc: Add docs for ad7124
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: adc: Add ad7124 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] staging:iio:ad2s90: Add max frequency check at probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] staging:iio:ad2s90: Remove spi setup that should be done via dt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/6] staging:iio:ad2s90: Add dt support and move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] staging:iio:ad2s90: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Adding IIO list archives to lore.kernel.org
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Adding IIO list archives to lore.kernel.org
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add SPDX license identifier
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add SPDX license identifier
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add SPDX license identifier
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add SPDX license identifier
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add SPDX license identifier
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 2/2] staging: iio: ad7780: generates pattern_mask from PAT bits
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• Re: [PATCH 5/6] staging:iio:ad2s90: Add SPDX license identifier
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Questions related to some drivers
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• [PATCH 1/6] staging:iio:ad2s90: Add device tree support
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 6/6] staging:iio:ad2s90: Move out of staging
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 5/6] staging:iio:ad2s90: Add SPDX license identifier
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 4/6] dt-bindings:iio:resolver: Add docs for ad2s90
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 3/6] staging:iio:ad2s90: Add max frequency check at probe
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 2/6] staging:iio:ad2s90: Remove spi setup that should be done via dt
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH 0/6] staging:iio:ad2s90: Add dt support and move out of staging
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v4 4/4] dt-bindings: iio: adc: Add docs for ad7124
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v4 3/4] iio: adc: Add ad7124 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v4 1/4] iio: ad_sigma_delta: Allow to provide custom data register address
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH][RFC] iio: Move attach/detach of the poll func to the core
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH][RFC] iio: Move attach/detach of the poll func to the core
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH][RFC] iio: Move attach/detach of the poll func to the core
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 4/4] staging: iio: ad7816: Add device tree table.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v3 4/4] staging: iio: ad7816: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v3 3/4] staging: iio: ad7816: Set RD/WR pin and CONVST pin as outputs.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v3 2/4] staging: iio: ad7816: Do not use busy_pin in case of AD7818
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v3 0/4] staging: iio: ad7816: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH] iio: adc: sc27xx: Add ADC data conversion timeout
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH] IIO: extend dac/MCP4922 to MCP49x1 devices
  • From: Matt Walker <mattofak@xxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: Questions related to some drivers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: Questions related to some drivers
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v2 2/2] staging: iio: ad7780: generates pattern_mask from PAT bits
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2 2/2] staging: iio: ad7780: generates pattern_mask from PAT bits
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH v2 1/2] staging: iio: ad7780: check if ad778x before gain update
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH v2 0/2] pattern generation and gain update
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH v6 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v6 2/3] iio: magnetometer: Add DT support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: Add PNI to the vendor prefixes
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v6 0/3] Add support for PNI RM3100 magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: ad7780: generates pattern_mask from PAT bits
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/3] staging: iio: ad7780: check if ad778x before gain update
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: ad7780: Add is_ad778x flag chip info
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: Question about max frequency in ad2s90
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: max9611: convert to SPDX identifiers
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH] iio: adc: max11100: convert to SPDX identifiers
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH] iio: adc: rcar-gyroadc: convert to SPDX identifiers
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v2] staging: iio: adc: ad7280a: do not pass the copy of struct element
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v7 1/2] iio: light: Add support for vishay vcnl4035
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Questions related to some drivers
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH 3/3] staging: iio: ad7780: generates pattern_mask from PAT bits
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH 2/3] staging: iio: ad7780: check if ad778x before gain update
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH 1/3] staging: iio: ad7780: Add is_ad778x flag chip info
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• [PATCH 0/3] staging: iio: ad7780: pattern generation and gain update
  • From: Giuliano Belinassi <giuliano.belinassi@xxxxxxxxx>
• Re: Question about max frequency in ad2s90
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• [PATCH v7 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v7 1/2] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH] iio: st-accel: add support for lis3de
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: Work plan on ad5933
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: adc: ad7280a: do not pass the copy of struct element
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: Question about max frequency in ad2s90
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] staging: iio: adc: ad7280a: do not pass the copy of struct element
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] staging: iio: adc: ad7280a: do not pass the copy of struct element
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 1/3] iio: adc: add STMPE ADC driver using IIO framework
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: Add stmpe-adc driver to relevant devicetrees
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: Question about max frequency in ad2s90
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: Questions related to some drivers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: Question about max frequency in ad2s90
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx
  • From: Chris Coffey <cmc@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4 1/2] staging: iio: ad7780: update voltage on read
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Question about max frequency in ad2s90
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: meson-saradc: add temperature sensor support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: Add PNI to the vendor prefixes.
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 2/2] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v4 1/2] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v4 0/2] staging: iio: ad7780: correct driver read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Work plan on ad5933
  • From: Lucas Santos <ilucas.ms@xxxxxxxxx>
• Re: Questions related to some drivers
  • From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@xxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] add i2c controller support to st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 0/7] add i2c controller support to st_lsm6dsx driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: imu: st_lsm6dsx: add i2c embedded controller support
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 0/7] add i2c controller support to st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: Work plan on ad2s90
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] iio: imu: st_lsm6dsx: add i2c embedded controller support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 0/7] add i2c controller support to st_lsm6dsx driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: imu: st_lsm6dsx: add i2c embedded controller support
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: imu: st_lsm6dsx: add i2c embedded controller support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: imu: st_lsm6dsx: reboot memory content after reset
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: imu: st_lsm6dsx: reboot memory content after reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/7] iio: imu: st_lsm6dsx: introduce locked read/write utility routines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: meson-saradc: add temperature sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/6] staging:iio:ad2s90: Check channel type at read_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/6] staging:iio:ad2s90: Move device registration to the end of probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] staging:iio:ad2s90: Remove always overwritten assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Work plan on ad2s90
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH 6/7] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH 7/7] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH 5/7] iio: imu: st_lsm6dsx: add i2c embedded controller support
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH 4/7] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH 3/7] iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH 2/7] iio: imu: st_lsm6dsx: reboot memory content after reset
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH 1/7] iio: imu: st_lsm6dsx: introduce locked read/write utility routines
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH 0/7] add i2c controller support to st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: meson-saradc: add temperature sensor support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] meson-saradc: add chip temperature support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v3 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 3/6] staging:iio:ad2s90: Remove always overwritten assignment
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 6/6] staging:iio:ad2s90: Check channel type at read_raw
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 4/6] staging:iio:ad2s90: Move device registration to the end of probe
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• [PATCH v3 0/6] staging:iio:ad2s90: Add scale info and improve error handling
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH][RFC] iio: Move attach/detach of the poll func to the core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] staging: iio: ad7780: fix offset read value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sx932x: Add driver for Semtech sx932x proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v2 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v3 1/3] staging: iio: ad7780: fix offset read value
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] staging: iio: ad7780: fix offset read value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] staging: iio: ad2s1210: Add device tree table.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] staging: iio: ad2s1210: Drop the gpioin flag.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] staging: iio: ad2s1210: Add device tree table.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add Xilinx AMS driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable device after trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Matheus Tavares <matheus.bernardino@xxxxxx>
• Re: [PATCH v2 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 3/3] iio: magnetometer: Add driver support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 2/3] iio: magnetometer: Add DT support for PNI RM3100
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: Add PNI to the vendor prefixes.
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH v5 0/3] Add support for PNI RM3100 magnetometer
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH] iio: sx932x: Add driver for Semtech sx932x proximity sensor
  • From: Enrico Granata <egranata@xxxxxxxxxx>
• Re: [PATCH v7 3/3] staging: iio: ad2s1210: Add device tree table.
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v3 3/3] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 2/3] staging: iio: ad7780: update voltage on read
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 1/3] staging: iio: ad7780: fix offset read value
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v3 3/3] staging: iio: ad7780: remove unnecessary stashed voltage value
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v3 2/3] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v3 1/3] staging: iio: ad7780: fix offset read value
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v3 0/3] staging: iio: ad7780: correct driver read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH] media: uvcvideo: Add boottime clock support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v7 3/3] staging: iio: ad2s1210: Add device tree table.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v7 2/3] staging: iio: ad2s1210: Drop the gpioin flag.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v7 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v7 0/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 08/11] arm64: dts: allwinner: a64: pinebook: enable power supplies
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 07/11] arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 06/11] arm64: dts: allwinner: axp803: add AC and battery power supplies
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 03/11] dt-bindings: gpio: gpio-axp209: add AXP803 GPIO bindings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 09/11] power: supply: add AC power supply driver for AXP813
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 02/11] dt-bindings: power: supply: axp20x: add AXP803 power bindings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 00/11] AXP8x3 AC and battery power supply support
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc128s052: Add pin-compatible IDs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: dac: Add ti,dac7311 device tree bindings in documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC][PATCH v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] staging:iio:ad2s90: Add scale info and improve error handling
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: vadc: Update example to include unit address for node 'usb-id-nopull'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC][PATCH v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC][PATCH v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: Add ad7124 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [no subject]
  • From: <stefan.popa@xxxxxxxxxx>
• [PATCH v3 1/3] iio: ad_sigma_delta: Allow to provide custom data register address
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: Add Xilinx AMS driver
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v3 3/3] arm64: zynqmp: DT: Add Xilinx AMS node
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v3 0/3] Add Xilinx AMS Driver
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH] iio:st_magn: enable device after trigger
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• RE: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH v6 3/3] staging: iio: ad2s1210: Add device tree support.
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• [PATCH v2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v6 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] staging: iio: adc: ad7280a: don't cast type inside switch expression
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: magn: add LSM9DS1 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio:magnetometer: st_magn: add BDU settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio:magnetometer: st_magn: add LSM9DS1 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: magnetometer: add clarifying comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: magnetometer: add clarifying comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: update voltage on read
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v2 0/6] staging:iio:ad2s90: Add scale info and improve error handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] staging:iio:ad2s90: Make probe handle spi_setup failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: dac: Add ti,dac7311 device tree bindings in documentation
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• [PATCH v4 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH] iio:st_magn: enable trigger before enabling sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/2] iio:adc:ad7949: Add AD7949 ADC driver family
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio:temperature:max31856:Add device tree bind info
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] staging: iio: ad7780: fix offset read value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7780: update voltage on read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: potentiometer: tpl0102: switch to using pointer to chip config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc128s052: Add pin-compatible IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] doc:devicetree: Add AD7949 device tree bindings in documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] iio:adc:ad7949: Add AD7949 ADC driver family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad5933: Remove unnecessary blank line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad5933: Remove unnecessary space on casting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] staging: iio: ad2s1210: Add device tree support.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] staging: iio: ad2s1210: Add device tree support.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Work plan on ad2s90
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 6/7] ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 5/7] ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 4/7] ARM: dts: meson8b: add the temperature calibration data for the SAR ADC
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: dts: meson8: add the temperature calibration data for the SAR ADC
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: iio: adc: meson-saradc: add temperature sensor support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/7] meson-saradc: add chip temperature support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>