Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 25 Nov 2018 16:44:23 +0100
Tomasz Duszynski <tduszyns@xxxxxxxxx> wrote:

> On Sun, Nov 25, 2018 at 06:14:44AM -0800, Matt Ranostay wrote:
> > On Sun, Nov 25, 2018 at 6:03 AM Jonathan Cameron
> > <jic23@xxxxxxxxxxxxxxxxxxxxx> wrote:  
> > >
> > > On Sun, 25 Nov 2018 05:51:32 -0800
> > > Matt Ranostay <matt.ranostay@xxxxxxxxxxxx> wrote:
> > >  
> > > > On Sat, Nov 24, 2018 at 2:14 PM Tomasz Duszynski <tduszyns@xxxxxxxxx> wrote:  
> > > > >
> > > > > Measuring particulate matter in ug / m3 (micro-grams per cubic meter)
> > > > > is de facto standard. Existing air quality sensors usually follow
> > > > > this convention and are capable of returning measurements using
> > > > > this unit.
> > > > >
> > > > > IIO currently does not offer suitable channel type for this
> > > > > type of measurements hence this patch adds this.
> > > > >
> > > > > In addition, two modifiers are introduced used for distinguishing
> > > > > between coarse (PM10) and fine particles (PM2p5) measurements, i.e
> > > > > IIO_MOD_PM10 and IIO_MOD_PM2p5.
> > > > >
> > > > > Signed-off-by: Tomasz Duszynski <tduszyns@xxxxxxxxx>
> > > > > ---
> > > > >  Documentation/ABI/testing/sysfs-bus-iio | 11 ++++++++++-
> > > > >  drivers/iio/industrialio-core.c         |  3 +++
> > > > >  include/uapi/linux/iio/types.h          |  3 +++
> > > > >  tools/iio/iio_event_monitor.c           |  6 ++++++
> > > > >  4 files changed, 22 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> > > > > index 8127a08e366d..ce0ed140660d 100644
> > > > > --- a/Documentation/ABI/testing/sysfs-bus-iio
> > > > > +++ b/Documentation/ABI/testing/sysfs-bus-iio
> > > > > @@ -1684,4 +1684,13 @@ KernelVersion:   4.18
> > > > >  Contact:       linux-iio@xxxxxxxxxxxxxxx
> > > > >  Description:
> > > > >                 Raw (unscaled) phase difference reading from channel Y
> > > > > -               that can be processed to radians.
> > > > > \ No newline at end of file
> > > > > +               that can be processed to radians.
> > > > > +
> > > > > +What:          /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input
> > > > > +What:          /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input
> > > > > +What:          /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input
> > > > > +What:          /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input
> > > > > +KernelVersion: 4.21
> > > > > +Contact:       linux-iio@xxxxxxxxxxxxxxx
> > > > > +Description:
> > > > > +               Mass concentration reading of particulate matter in ug / m3.
> > > > > diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> > > > > index a062cfddc5af..2a9ef600c1fb 100644
> > > > > --- a/drivers/iio/industrialio-core.c
> > > > > +++ b/drivers/iio/industrialio-core.c
> > > > > @@ -87,6 +87,7 @@ static const char * const iio_chan_type_name_spec[] = {
> > > > >         [IIO_GRAVITY]  = "gravity",
> > > > >         [IIO_POSITIONRELATIVE]  = "positionrelative",
> > > > >         [IIO_PHASE] = "phase",
> > > > > +       [IIO_MASSCONCENTRATION] = "massconcentration",
> > > > >  };
> > > > >
> > > > >  static const char * const iio_modifier_names[] = {
> > > > > @@ -127,6 +128,8 @@ static const char * const iio_modifier_names[] = {
> > > > >         [IIO_MOD_Q] = "q",
> > > > >         [IIO_MOD_CO2] = "co2",
> > > > >         [IIO_MOD_VOC] = "voc",
> > > > > +       [IIO_MOD_PM2p5] = "pm2p5",
> > > > > +       [IIO_MOD_PM10] = "pm10",
> > > > >  };
> > > > >
> > > > >  /* relies on pairs of these shared then separate */
> > > > > diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h
> > > > > index 92baabc103ac..465044b42af5 100644
> > > > > --- a/include/uapi/linux/iio/types.h
> > > > > +++ b/include/uapi/linux/iio/types.h
> > > > > @@ -46,6 +46,7 @@ enum iio_chan_type {
> > > > >         IIO_GRAVITY,
> > > > >         IIO_POSITIONRELATIVE,
> > > > >         IIO_PHASE,
> > > > > +       IIO_MASSCONCENTRATION,  
> > > >
> > > > So I'm guessing IIO_CONCENTRATION can't be scaled to the micro-grams
> > > > per cubic meter?  
> > >
> > > Currently concentration is defined as a percentage reading of a substance
> > > (which does make me wonder if it is meant to be percentage of the volume or
> > > percentage of the mass?)  Either way, if can't convert to a density measurement
> > > as it's a unit free ratio (I think).  
> >
> > Seems like it can be both..  guessing all the atmosphere ( CO2, VOC,
> > etc) ones are mass/density because on how they work.  
> 
> Hmm, but still percentage was picked up for IIO_CONCENTRATION which does
> really match PM expectations. Perhaps if units were sticked to modifiers
> it whould be easier to reuse that.

It gets very messy if we start doing that modifiers, I'd rather stick to
different channel types.  We already do this with other channel types
position / positionrelative for example.

It isn't as though it's actually possible to convert between the two without
knowing what the particles actually are...

Jonathan
> 
> > But the electro-conductivity sensor that is using IIO_CONCENTRATION
> > channels is likely from percentage of volume.
> >
> > - Matt
> >  
> > >  
> > > >  
> > > > >  };
> > > > >
> > > > >  enum iio_modifier {
> > > > > @@ -87,6 +88,8 @@ enum iio_modifier {
> > > > >         IIO_MOD_VOC,
> > > > >         IIO_MOD_LIGHT_UV,
> > > > >         IIO_MOD_LIGHT_DUV,
> > > > > +       IIO_MOD_PM2p5,  
> > > >
> > > > I know this is unit of measure but the lowercase p in IIO_MOD_PM2p5 is
> > > > a bit non-standard for iio defines/enum.  
> > > It is a bit odd and will get us scripted reports so maybe best to
> > > just go upper case and not worry about it.
> > >
> > > Jonathan  
> > > >
> > > > - Matt
> > > >  
> > > > > +       IIO_MOD_PM10,
> > > > >  };
> > > > >
> > > > >  enum iio_event_type {
> > > > > diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c
> > > > > index ac2de6b7e89f..f0fcfeddba2b 100644
> > > > > --- a/tools/iio/iio_event_monitor.c
> > > > > +++ b/tools/iio/iio_event_monitor.c
> > > > > @@ -60,6 +60,7 @@ static const char * const iio_chan_type_name_spec[] = {
> > > > >         [IIO_GRAVITY] = "gravity",
> > > > >         [IIO_POSITIONRELATIVE] = "positionrelative",
> > > > >         [IIO_PHASE] = "phase",
> > > > > +       [IIO_MASSCONCENTRATION] = "massconcentration",
> > > > >  };
> > > > >
> > > > >  static const char * const iio_ev_type_text[] = {
> > > > > @@ -115,6 +116,8 @@ static const char * const iio_modifier_names[] = {
> > > > >         [IIO_MOD_Q] = "q",
> > > > >         [IIO_MOD_CO2] = "co2",
> > > > >         [IIO_MOD_VOC] = "voc",
> > > > > +       [IIO_MOD_PM2p5] = "pm2p5",
> > > > > +       [IIO_MOD_PM10] = "pm10",
> > > > >  };
> > > > >
> > > > >  static bool event_is_known(struct iio_event_data *event)
> > > > > @@ -156,6 +159,7 @@ static bool event_is_known(struct iio_event_data *event)
> > > > >         case IIO_GRAVITY:
> > > > >         case IIO_POSITIONRELATIVE:
> > > > >         case IIO_PHASE:
> > > > > +       case IIO_MASSCONCENTRATION:
> > > > >                 break;
> > > > >         default:
> > > > >                 return false;
> > > > > @@ -200,6 +204,8 @@ static bool event_is_known(struct iio_event_data *event)
> > > > >         case IIO_MOD_Q:
> > > > >         case IIO_MOD_CO2:
> > > > >         case IIO_MOD_VOC:
> > > > > +       case IIO_MOD_PM2p5:
> > > > > +       case IIO_MOD_PM10:
> > > > >                 break;
> > > > >         default:
> > > > >                 return false;
> > > > > --
> > > > > 2.19.2
> > > > >  
> > >  




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux