Linux IIO Development

• Thread Index

• Re: [PATCH v2 4/6] dt-bindings: document open-drain property
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: staging: iio: adc: Include SPDX Identifier
  • From: Felipe Cardoso Resende <felipecardoso.fcr@xxxxxxxxx>
• Re: [PATCH v2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• Re: [PATCH v4 3/3] Staging: iio: adt7316: Add regmap support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] Add device tree binding documentation for MAX44009
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] Add driver support for MAX44009 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: staging: iio: adc: Include SPDX Identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] iio:bmi160: use if (ret) instead of if (ret < 0)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/6] dt-bindings: document open-drain property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio:bmi160: add drdy interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: mpu6050: Add support for the ICM 20602 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/2] Add device tree binding documentation for MAX44009
  • From: Robert Eshleman <bobbyeshleman@xxxxxxxxx>
• [PATCH v2 1/2] Add driver support for MAX44009 light sensor
  • From: Robert Eshleman <bobbyeshleman@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: ti-ads7950: inconsistency with spi msg
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio:ad7152: Rename misspelled RESEVERD -> RESERVED
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: A situation
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] staging:iio:ad7152: Rename misspelled RESEVERD -> RESERVED
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: A situation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: imx25 ADC values wrong after sporadic time
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: ti-ads7950.c GPIO Pins
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] drivers: staging: iio: adc: Include SPDX Identifier
  • From: Felipe Cardoso Resende <felipecardoso.fcr@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: pressure: add LPS22HH bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 3/3] Staging: iio: adt7316: Add regmap support
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v4 2/3] Staging: iio: adt7316: Remove multi read and write functions
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v4 1/3] Staging: iio: adt7316: Remove irq from bus structure
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v4 0/3] adt7316 regmap implementation
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: add NPCM ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_accel: use ACPI orientation data
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: Add driver for TLA202x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/3] adt7316 regmap implementation
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v3 0/3] adt7316 regmap implementation
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v3 0/3] adt7316 regmap implementation
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH] staging:iio:ad7152: Rename misspelled RESEVERD -> RESERVED
  • From: Rodrigo Ribeiro <rodrigorsdc@xxxxxxxxx>
• Re: [PATCH] staging:iio:ad7152: Rename misspelled RESEVERD -> RESERVED
  • From: Rodrigo Ribeiro <rodrigorsdc@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: ti-ads7950: inconsistency with spi msg
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH v2] iio: adc: ti-ads7950: inconsistency with spi msg
  • From: justinpopo6@xxxxxxxxx
• Re: [PATCH] drivers: iio: industrialio-core: add check when kzalloc fails
  • From: Bharath Vedartham <linux.bhar@xxxxxxxxx>
• Re: [PATCH] drivers: iio: industrialio-core: add check when kzalloc fails
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH v2] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• Re: iio scale precision
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• [PATCH v2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• Re: iio scale precision
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] staging:iio:ad7152: Rename misspelled RESEVERD -> RESERVED
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7192: Add clock for external clock reference
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] drivers: iio: industrialio-core: add check when kzalloc fails
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads7950: inconsistency with spi msg
  • From: Justin Chen <justinpopo6@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads7950: inconsistency with spi msg
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] iio: adc: ti-ads7950: inconsistency with spi msg
  • From: justinpopo6@xxxxxxxxx
• Re: [PATCH 1/2] staging: iio: adc: ad7192: Add clock for external clock reference
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs
  • From: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
• [PATCH] staging:iio:ad7152: Rename misspelled RESEVERD -> RESERVED
  • From: Rodrigo Ribeiro <rodrigorsdc@xxxxxxxxx>
• A situation
  • From: Kerry Miller <n0wiq@xxxxxxxxxxx>
• [PATCH] drivers: iio: industrialio-core: add check when kzalloc fails
  • From: Bharath Vedartham <linux.bhar@xxxxxxxxx>
• imx25 ADC values wrong after sporadic time
  • From: Benjamin Beckmeyer <beckmeyer.b@xxxxxxxxx>
• Re: ti-ads7950.c GPIO Pins
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: chemical: add support for Plantower PMS7003 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• ti-ads7950.c GPIO Pins
  • From: Justin Chen <justinpopo6@xxxxxxxxx>
• iio scale precision
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: imu: mpu6050: Add support for the ICM 20602 IMU
  • From: Randolph Maaßen <gaireg@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: imu: add icm20602 bindings to mpu6050
  • From: Randolph Maaßen <gaireg@xxxxxxxxx>
• Re: Example for buffer-dmaengine?
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH 2/5] iio:bmi160: add drdy interrupt support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 6/6] iio:bmi160: use if (ret) instead of if (ret < 0)
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 5/6] iio:bmi160: use iio_pollfunc_store_time
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/6] dt-bindings: document open-drain property
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: fix incorrect bmi160 IRQ note
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/6] iio:bmi160: add drdy interrupt support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/6] iio:bmi160: add SPDX identifiers
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: light: add driver support for MAX44009
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: sebastien bourdelin <sebastien.bourdelin@xxxxxxxxx>
• Example for buffer-dmaengine?
  • From: Crash House <jcrash29.acc@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: Add AD7768-1 ADC basic support
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: Add AD7768-1 ADC basic support
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH] iio: light: add driver support for MAX44009
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: Add driver for TLA202x ADCs
  • From: Ibtsam Ul-Haq <ibtsam.haq.0x01@xxxxxxxxx>
• Re: [PATCH 1/2] iio: drop const typing from iio_mount_matrix rotation
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH] iio: light: add driver support for MAX44009
  • From: Robert Eshleman <bobbyeshleman@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v3 1/3] Staging: iio: adt7316: Remove irq from bus structure
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v3 2/3] Staging: iio: adt7316: Remove multi read and write functions
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v3 3/3] Staging: iio: adt7316: Add regmap support
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v3 0/3] adt7316 regmap implementation
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH] dt-bindings: iio: pressure: add LPS22HH bindings
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: light: add driver support for MAX44009
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v2 0/3] adt7316 regmap implementation
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v2 0/3] adt7316 regmap implementation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] Staging: iio: adt7316: Remove irq from bus structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: add driver support for MAX44009
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/3] Staging: iio: adt7316: Add regmap support
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 2/3] Staging: iio: adt7316: Remove multi read and write functions
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 1/3] Staging: iio: adt7316: Remove irq from bus structure
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v2 0/3] adt7316 regmap implementation
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: add NPCM ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: chemical: sps30: allow changing self cleaning period
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: Add AD7768-1 ADC basic support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: chemical: bme680: Add device-tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:st_pressure:initial lps22hh sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio:st_pressure:initial lps22hh sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio:bmi160:snap timestamp closer to event
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings:bmi160: add "BOTH" int pin type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio:bmi160: add drdy interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio:bmi160: add SPDX identifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add the TI ads124s08 ADC code
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_accel: use ACPI orientation data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: drop const typing from iio_mount_matrix rotation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7780: Add gain & filter gpio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7780: Add gain & filter gpio support
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH] iio: light: add driver support for MAX44009
  • From: Robert Eshleman <bobbyeshleman@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add docs for AD7768-1
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 0/2] iio: adc: npcm: add NPCM ADC driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v3 2/2] iio: adc: add NPCM ADC driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v3 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, IIO and Input due for the v5.1 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] iio: chemical: sps30: allow changing self cleaning period
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v3 1/2] iio: chemical: bme680: Add device-tree support
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v3] iio: chemical: sps30: allow changing self cleaning period
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: adc: Add docs for AD7768-1
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: Add AD7768-1 ADC basic support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_accel: use ACPI orientation data
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH 0/5] iio:bmi160: add drdy interrupt support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• RE: [PATCH] iio:st_pressure:initial lps22hh sensor support
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• RE: [PATCH 2/2] iio: st_accel: use ACPI orientation data
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH v3] iio: chemical: sps30: allow changing self cleaning period
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add the TI ads124s08 ADC code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
• [PATCH v3 1/2] iio: chemical: bme680: Add device-tree support
  • From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: sebastien bourdelin <sebastien.bourdelin@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: sebastien bourdelin <sebastien.bourdelin@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: sebastien bourdelin <sebastien.bourdelin@xxxxxxxxx>
• [PATCH] iio:st_pressure:initial lps22hh sensor support
  • From: Mario Tesi <martepisa@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 5/5] iio:bmi160:snap timestamp closer to event
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] dt-bindings:bmi160: add "BOTH" int pin type
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 3/5] dt-bindings: fix incorrect bmi160 IRQ note
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 2/5] iio:bmi160: add drdy interrupt support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 1/5] iio:bmi160: add SPDX identifiers
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 0/5] iio:bmi160: add drdy interrupt support
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: chemical: bme680: Add device-tree support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] iio: chemical: bme680: Add device-tree support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v3] iio: chemical: sps30: allow changing self cleaning period
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH V7 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH 2/2] iio: st_accel: use ACPI orientation data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7 1/2] dt-bindings: iio: accel: mma8452: add power supplies property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V9] iio: light: isl29018: add vcc regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5686: Add support for AD5674R/AD5679R
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add NPCM ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add the TI ads124s08 ADC code
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add the TI ads124s08 ADC code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: ti-ads124s08: Add DT binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: ti-ads8688: Update buffer allocation for timestamps
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: chemical: sps30: allow changing self cleaning period
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7768-1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add AD7768-1 ADC basic support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: New IIO/counter driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: chemical: add support for Plantower PMS7003 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: axp288: Fix TS-pin handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: allow changing self cleaning period
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Staging: iio: adt7316: Add regmap support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH v2] tools: iio: iio_generic_buffer: make num_loops signed
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [bug report] tools: iio: iio_generic_buffer: allow continuous looping
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [PATCH] tools: iio: iio_generic_buffer: make num_loops signed
  • From: Martin Kelly <mkelly@xxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: iio: chemical: pms7003: add device tree support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: add Plantower to the vendor prefixes
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
• [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
  • From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
• [PATCH v2] iio: chemical: sps30: allow changing self cleaning period
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v3 3/3] iio: ti-ads8688: Update buffer allocation for timestamps
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 2/3] iio: adc: Add the TI ads124s08 ADC code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 1/3] iio: ti-ads124s08: Add DT binding documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 2/2] dt-bindings: iio: chemical: Add bindings for bme680
  • From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
• [PATCH 1/2] iio: chemical: bme680: Add device-tree support
  • From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
• Re: [PATCH V7 1/2] dt-bindings: iio: accel: mma8452: add power supplies property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: add NPCM ADC driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 0/2] iio: adc: npcm: add NPCM ADC driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v6 6/8] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH v6 0/8] Adding support for STMPE811 ADC
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH v6 5/8] iio: adc: add STMPE ADC driver using IIO framework
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH] iio: dac: ad5686: Add support for AD5674R/AD5679R
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [bug report] tools: iio: iio_generic_buffer: allow continuous looping
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [bug report] tools: iio: iio_generic_buffer: allow continuous looping
  • From: Martin Kelly <mkelly@xxxxxxxx>
• [bug report] tools: iio: iio_generic_buffer: allow continuous looping
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 069/117] iio: adc: qcom-spmi-adc5: Initialize prescale properly
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: chemical: add support for Plantower PMS7003 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH V7 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V7 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: New IIO/counter driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: New IIO/counter driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• RE: [PATCH V6] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• RE: [PATCH V6 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• RE: [PATCH V8] iio: light: isl29018: add vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V7 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V7] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V7 1/2] dt-bindings: iio: accel: mma8452: add power supplies property
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V9] iio: light: isl29018: add vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V6 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: New IIO/counter driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 1/3] iio: chemical: add support for Plantower PMS7003 sensor
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: New IIO/counter driver
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7768-1
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: Add AD7768-1 ADC basic support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: iio: chemical: pms7003: add device tree support
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 1/3] iio: chemical: add support for Plantower PMS7003 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: add Plantower to the vendor prefixes
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 0/3] add support for PMS7003 PM sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: allow changing self cleaning period
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] Staging: iio: adt7316: Add regmap support
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH v2] iio: adc: axp288: Fix TS-pin handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Fix TS-pin handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] staging: iio: adt7316: fix the dac write calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] staging: iio: adt7316: fix the dac read calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] staging: iio: adt7316: fix handling of dac high resolution option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] staging: iio: adt7316: fix dac_bits assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V6] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V8] iio: light: isl29018: add vcc regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V6 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: adt7316: Add regmap support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add NPCM ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: allow changing self cleaning period
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx: check return value of xadc_write_adc_reg
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: enable the temperature sensor two more SoCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: enable the temperature sensor two more SoCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: meson-saradc: update temperature sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Fix TS-pin handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: axp288: Fix TS-pin handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: meson-saradc: update temperature sensor support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx: check return value of xadc_write_adc_reg
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: chemical: sps30: add support for self cleaning
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• Re: Loging int PlutoSDR
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 0/2] meson-saradc: temperature sensor support for Meson8b/Meson8m2
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: meson-saradc: enable the temperature sensor two more SoCs
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: meson-saradc: update temperature sensor support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH V6 1/2] dt-bindings: iio: accel: mma8452: add power supplies property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: adc: xilinx: check return value of xadc_write_adc_reg
  • From: Aditya Pakki <pakki001@xxxxxxx>
• [PATCH] iio: chemical: sps30: allow changing self cleaning period
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add NPCM ADC driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v1 2/2] iio: adc: add NPCM ADC driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 1/2] dt-binding: iio: add NPCM ADC documentation
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 0/2] iio: adc: npcm: add NPCm ADC driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH] Staging: iio: adt7316: Add regmap support
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Loging int PlutoSDR
  • From: Kerry Miller <n0wiq@xxxxxxxxxxx>
• [PATCH V6 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• RE: [PATCH V5 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V6 1/2] dt-bindings: iio: accel: mma8452: add power supplies property
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V8] iio: light: isl29018: add vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• RE: [PATCH V7] iio: light: isl29018: add vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V6] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH v2 4/4] staging: iio: adt7316: fix the dac write calculation
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH v2 3/4] staging: iio: adt7316: fix the dac read calculation
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH v2 2/4] staging: iio: adt7316: fix handling of dac high resolution option
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH v2 1/4] staging: iio: adt7316: fix dac_bits assignment
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH v2 0/4] staging: iio: adt7316: dac fixes
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH 2/2] iio: st_accel: use ACPI orientation data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/11] staging: iio: adt7316: fix dac_bits assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] staging: iio: adc: ad7606: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/6] staging: iio: adc: ad7606: Misc style fixes (no functional change)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/6] staging: iio: adc: ad7606: Add support for threaded irq
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] staging: iio: adc: ad7606: Use SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] staging: iio: adc: ad7606: Simplify the Kconfing menu
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: adis16240: fixed a SPDX identifier tag mistake
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad9523: fix a missing check of return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] Staging: iio: adis16203: fixed a SPDX identifier tag mistake
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: chemical: sps30: add support for self cleaning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V5 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7] iio: light: isl29018: add vcc regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V5 2/2] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V5 1/2] dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: adc: ad7280a: fix codestyle in ad7280_event_handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] Staging: iio: ad7192: replaced bool in struct
  • From: Amir Mahdi Ghorbanian <indigoomega021@xxxxxxxxx>
• Re: [PATCH v5 6/8] iio: adc: add STMPE ADC devicetree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 0/8] Adding support for STMPE811 ADC
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH v5 6/8] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH v5 5/8] iio: adc: add STMPE ADC driver using IIO framework
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• Re: [PATCH][V2] iio: Move attach/detach of the poll func to the core
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/2] Staging: iio: adis16203: fixed a SPDX identifier tag mistake
  • From: Amir Mahdi Ghorbanian <indigoomega021@xxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for ADC on pms405 PMIC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 10/11] staging: iio: adc: ad7606: Move out of staging
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: IIO BME680 driver
  • From: Tuukka Pasanen <pasanen.tuukka@xxxxxxxxx>
• [PATCH] iio: ad9523: fix a missing check of return value
  • From: Kangjie Lu <kjlu@xxxxxxx>
• [PATCH 2/2] iio: st_accel: use ACPI orientation data
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [PATCH 1/2] iio: drop const typing from iio_mount_matrix rotation
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [PATCH] Staging: iio: adis16240: fixed a SPDX identifier tag mistake
  • From: Amir Mahdi Ghorbanian <indigoomega021@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: ti-ads8688: Update buffer allocation for timestamps
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH][V2] iio: Move attach/detach of the poll func to the core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2] iio: chemical: sps30: add support for self cleaning
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio: chemical: sgp30: add device tree support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 6/8] iio: adc: add STMPE ADC devicetree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] staging: iio: adc: ad7280a: fix codestyle in ad7280_event_handler
  • From: Sergey Efimochkin <sergeyanton2007@xxxxxxxxx>
• Re: [PATCH V5 1/2] dt-bindings: iio: accel: mma8452: add power supplies property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/11] staging: iio: adt7316: fix dac_bits assignment
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH] iio: chemical: sps30: add support for self cleaning
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH V5 1/2] dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v2 5/6] staging: iio: adc: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 6/6] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 0/6] staging: iio: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 4/6] staging: iio: adc: ad7606: Misc style fixes (no functional change)
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 3/6] staging: iio: adc: ad7606: Add support for threaded irq
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 2/6] staging: iio: adc: ad7606: Use SPDX identifier
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 1/6] staging: iio: adc: ad7606: Simplify the Kconfing menu
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 05/11] staging: iio: adc: ad7606: Add support for threaded irq
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• [PATCH v4] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] staging:iio:adc: fix codestyle
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH V5 2/2] iio: accell: mma8452: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V5 1/2] dt-bindings: iio: accel: mma8452: add power supplies property
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V5 2/2] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V5 1/2] dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V7] iio: light: isl29018: add vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH] staging:iio:adc: fix codestyle
  • From: Sergey Efimochkin <sergeyanton2007@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: IIO BME680 driver
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: IIO BME680 driver
  • From: Tuukka Pasanen <pasanen.tuukka@xxxxxxxxx>
• Re: [PATCH -next] iio: imu: st_lsm6dsx: remove set but not used variable ''
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/11] staging: iio: adc: ad7606: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V6] iio: light: isl29018: add optional vcc regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/11] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/11] staging: iio: adc: ad7606: Misc style fixes (no functional change)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/11] staging: iio: adc: ad7606: Add OF device ID table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/11] staging: iio: adc: ad7606: Use vendor prefix for DT properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/11] staging: iio: adc: ad7606: Use find_closest() macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/11] staging: iio: adc: ad7606: Add support for threaded irq
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/11] staging: iio: adc: ad7606: Use devm functions in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/11] staging: iio: adc: ad7606: Use wait-for-completion handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: chemical: sgp30: add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: Add modifiers for ethanol and H2 gases
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: chemical: sps30: add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V6] iio: light: isl29018: add optional vcc regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7816: drop unnecessary initialization of variables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/8] iio: adc: add STMPE ADC devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/8] iio: adc: add STMPE ADC driver using IIO framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: ad5933: add binding doc for ad5933
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] staging: iio: ad5933: use clock framework for clock reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: ad5933: change regulator binging for vref
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] Staging: iio: adt7316: Add all irq related code in adt7316_irq_setup()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: drop unnecessary initialization of variables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/11] staging: iio: adt7316: correct spelling of ADT7316_DA_EN_VIA_DAC_LDCA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/11] staging: iio: adt7316: change interpretation of write to dac update mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/11] staging: iio: adt7316: remove dac vref buffer bypass from adt751x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/11] staging: iio: adt7316: allow adt751x to use internal vref for all dacs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/11] staging: iio: adt7316: use correct variable in DAC_internal_Vref read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/11] staging: iio: adt7316: fix the dac write calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/11] staging: iio: adt7316: fix the dac read calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/11] staging: iio: adt7316: fix dac_bits assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/11] staging: iio: adt7316: invert the logic of the check for an ldac pin
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/11] staging: iio: adt7316: fix register and bit definitions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: ti-ads8688: Migrate to device managed IIO calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: ti-ads8688: Update buffer allocation for timestamps
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: Add the TI ads124s08 ADC code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: ti-ads124s08: Add DT binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 1/2] dt-bindings: iio: accel: mma8452: add optional power supply property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4] iio: magnetometer: mag3110: add optional vdd/vddio regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7192: Add clock for external clock reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: IIO BME680 driver
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH -next] iio: imu: st_lsm6dsx: remove set but not used variable ''
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH -next] iio: imu: st_lsm6dsx: remove set but not used variable ''
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH 04/11] staging: iio: adt7316: fix handling of dac high resolution option
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH v4 0/3] add support for Sensirion SPS30 PM sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v4 3/3] iio: chemical: sps30: add device tree support
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v4 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v4 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH 1/2] docs: fix Co-Developed-by docs
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: Add modifiers for ethanol and H2 gases
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 04/11] staging: iio: adt7316: fix handling of dac high resolution option
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 02/11] staging: iio: adt7316: invert the logic of the check for an ldac pin
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7192: Add clock for external clock reference
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 02/11] staging: iio: adt7316: invert the logic of the check for an ldac pin
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH 04/11] staging: iio: adt7316: fix handling of dac high resolution option
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH v4] Staging: iio: adt7316: Add all irq related code in adt7316_irq_setup()
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH 01/11] staging: iio: adc: ad7606: Simplify the Kconfing menu
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v3 3/3] iio: chemical: sgp30: add device tree support
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• [PATCH v3 1/3] iio: Add modifiers for ethanol and H2 gases
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• [PATCH v3 0/3] iio: chemical: sgp30: Support Sensirion Gas Sensors
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH 05/11] staging: iio: adc: ad7606: Add support for threaded irq
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 02/11] staging: iio: adc: ad7606: Use SPDX identifier
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 02/11] staging: iio: adc: ad7606: Use SPDX identifier
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 10/11] staging: iio: adc: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 11/11] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 09/11] staging: iio: adc: ad7606: Misc style fixes (no functional change)
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 08/11] staging: iio: adc: ad7606: Add OF device ID table
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 07/11] staging: iio: adc: ad7606: Use vendor prefix for DT properties
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 06/11] staging: iio: adc: ad7606: Use find_closest() macro
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 05/11] staging: iio: adc: ad7606: Add support for threaded irq
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 04/11] staging: iio: adc: ad7606: Use devm functions in probe
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 03/11] staging: iio: adc: ad7606: Use wait-for-completion handler
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 01/11] staging: iio: adc: ad7606: Simplify the Kconfing menu
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 00/11] staging: iio: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PULL] Second set of IIO new device support, features, cleanups and minor fixes for 4.21
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH V6] iio: light: isl29018: add optional vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: qcom-spmi-adc5: Initialize prescale properly
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: qcom-spmi-adc5: Initialize prescale properly
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PULL] Second set of IIO new device support, features, cleanups and minor fixes for 4.21
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 3/3] iio: chemical: sps30: add device tree support
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v3 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v3 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v3 0/3] add support for Sensirion SPS30 PM sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Benson Leung <bleung@xxxxxxxxxx>
• [PATCH] staging: iio: ad7816: drop unnecessary initialization of variables
  • From: Hardik Singh Rathore <hardiksingh.k@xxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: Allow selection of Exynos ADC on S5PV210
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: exynos-adc: Add S5PV210 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V5 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 1/2] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH v2 0/2] staging: iio: adc: ad7280a: channel and attr init refactor
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH] staging: iio: adt7316: drop unnecessary initialization of variables
  • From: Hardik Singh Rathore <hardiksingh.k@xxxxxxxxx>
• [PATCH v4 6/8] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH v4 5/8] iio: adc: add STMPE ADC driver using IIO framework
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 10/11] staging: iio: adt7316: change interpretation of write to dac update mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for ADC on pms405 PMIC
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v1 0/2] Expose thermal information for pms405 PMIC
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH 10/11] staging: iio: adt7316: change interpretation of write to dac update mode
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 04/11] staging: iio: adt7316: fix handling of dac high resolution option
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 02/11] staging: iio: adt7316: invert the logic of the check for an ldac pin
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH v2] iio: bmi160: use all devm functions in probe
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• [PATCH 03/11] staging: iio: adt7316: fix dac_bits assignment
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 04/11] staging: iio: adt7316: fix handling of dac high resolution option
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 06/11] staging: iio: adt7316: fix the dac write calculation
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 05/11] staging: iio: adt7316: fix the dac read calculation
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 09/11] staging: iio: adt7316: remove dac vref buffer bypass from adt751x
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 07/11] staging: iio: adt7316: use correct variable in DAC_internal_Vref read
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 10/11] staging: iio: adt7316: change interpretation of write to dac update mode
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 11/11] staging: iio: adt7316: correct spelling of ADT7316_DA_EN_VIA_DAC_LDCA
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 08/11] staging: iio: adt7316: allow adt751x to use internal vref for all dacs
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 02/11] staging: iio: adt7316: invert the logic of the check for an ldac pin
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 01/11] staging: iio: adt7316: fix register and bit definitions
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• [PATCH 00/11] staging: iio: adt7316: dac fixes
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2 2/4] iio: adc: Add the TI ads124s08 ADC code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 4/4] iio: ti-ads8688: Migrate to device managed IIO calls
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 3/4] iio: ti-ads8688: Update buffer allocation for timestamps
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 1/4] iio: ti-ads124s08: Add DT binding documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] staging: iio: ad7606: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/3] Add devicetree support for ad5933
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Staging: iio: adt7316: Move interrupt related code
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH V4 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V4 1/2] dt-bindings: iio: accel: mma8452: add optional power supply property
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V4] iio: magnetometer: mag3110: add optional vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V5 2/2] iio: light: isl29018: add optional vdd regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V5 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V4 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• RE: [PATCH V4 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V4 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• RE: [PATCH V4 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V4 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH V3 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V3 1/2] dt-bindings: iio: accel: mma8452: add optional power supply property
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V3] iio: magnetometer: mag3110: add optional vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V4 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V4 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Anson Huang <anson.huang@xxxxxxx>
• RE: [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] staging: iio: ad7606: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] Add devicetree support for ad5933
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: ad5933: add binding doc for ad5933
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma9551_core: prevent using uninitialized variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: bmi160: use all devm functions in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add the TI ads124s08 ADC code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add the TI ads124s08 ADC code
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V2 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH V2 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH] iio: accel: mma9551_core: prevent using uninitialized variable
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v4 1/2] staging: iio: ad7606: Move out of staging
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH V2] iio: magnetometer: mag3110: add optional vdd/vddio regulator operation support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH V2] iio: magnetometer: mag3110: add optional vdd/vddio regulator operation support
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH V2 2/2] iio: accell: mma8452: add optional vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V2 1/2] dt-bindings: iio: accel: mma8452: add optional power supply property
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V2] iio: magnetometer: mag3110: add optional vdd/vddio regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V3 1/2] dt-bindings: iio: light: isl29018: update power supply name
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V3 2/2] iio: light: isl29018: add optional vdd/vdda regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH] iio: chemical: fix semicolon.cocci warnings
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2] iio: bmi160: use all devm functions in probe
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add devicetree support for ad5933
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH 0/3] Add devicetree support for ad5933
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 3/3] staging: iio: ad5933: add binding doc for ad5933
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 2/3] staging: iio: ad5933: use clock framework for clock reference
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 1/3] staging: iio: ad5933: change regulator binging for vref
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 0/3] Add devicetree support for ad5933
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 2/3] Staging: iio: adt7316: Move interrupt related code
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH v3 2/3] Staging: iio: adt7316: Move interrupt related code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: adc: exynos-adc: Add support for S5PV210
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5686: fix bit shift read register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:dac:ad5686: Add AD5310R support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: adc: ad7192: Add clock output option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7192: Add clock for external clock reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 1/3] Staging: iio: adt7316: Use device tree data to assign irq_type
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v3 2/3] Staging: iio: adt7316: Move interrupt related code
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v3 3/3] Staging: iio: adt7316: Add a dev_err() message
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH v3 0/3] Remove platform data and introduce DT bindings
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accell: mma8452: add optional vcc regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] iio: light: isl29018: add optional vcc regulator operation support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: qcom-spmi-adc5: Initialize prescale properly
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add the TI ads124s08 ADC code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: use a generic node name for lis302
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: check 'info' value before registering the device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: add binding doc for ad5933
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Re: Inconsistent SMO8840 accelerometer data between Windows and Linux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: add STMPE ADC devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
  • From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
• [PATCH 2/3] iio: adc: Allow selection of Exynos ADC on S5PV210
  • From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
• [PATCH 1/3] iio: adc: exynos-adc: Add S5PV210 variant
  • From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
• [PATCH 0/3] iio: adc: exynos-adc: Add support for S5PV210
  • From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
• Re: [PATCH] Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• Re: [ANNOUNCE] New IIO mailing list archive
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [ANNOUNCE] New IIO mailing list archive
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] iio: light: isl29018: add optional vcc regulator operation support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: mag3110: add optional vcc regulator operation support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accell: mma8452: add optional vcc regulator operation support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v2 3/3] iio: chemical: sps30: add device tree support
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v2 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH v2 0/3] add support for Sensirion SPS30 PM sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: add STMPE ADC devicetree bindings
  • From: Philippe Schenker <dev@xxxxxxxxxxxx>
• [PATCH] iio: dac: ad5686: fix bit shift read register
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH] iio:dac:ad5686: Add AD5310R support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH] Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/2] staging: iio: adc: ad7192: Add clock output option
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 1/2] staging: iio: adc: ad7192: Add clock for external clock reference
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 2/2] iio: accell: mma8452: add optional vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH 1/2] dt-bindings: iio: accel: mma8452: add optional vcc-supply property
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH] iio: magnetometer: mag3110: add optional vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH V2] iio: light: isl29018: add optional vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• [PATCH] iio: light: isl29018: add optional vcc regulator operation support
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH] Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH] Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  • From: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 004/123] iio:st_magn: Fix enable device after trigger
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 038/123] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 03/69] iio:st_magn: Fix enable device after trigger
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 16/69] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 02/45] iio:st_magn: Fix enable device after trigger
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH] iio: adc: qcom-spmi-adc5: Initialize prescale properly
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH] iio: adc: qcom-spmi-adc5: Initialize prescale properly
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH 1/2] iio: ti-ads124s08: Add DT binding documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 2/2] iio: adc: Add the TI ads124s08 ADC code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 1/2] iio: ti-ads124s08: Add DT binding documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 1/3] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: add binding doc for ad5933
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: chemical: sps30: add device tree support
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: replaced kfifo by triggered_buffer
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: accel: use a generic node name for lis302
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH v2 1/2] mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD and IIO due for the v4.21 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: chemical: add support for Sensirion SPS30 sensor
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 1/2] mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 0/2] tscadc: Couple of fixes
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] Re: Inconsistent SMO8840 accelerometer data between Windows and Linux
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: add binding doc for ad5933
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: Questions about the contributing process
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: Questions about the contributing process
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: add binding doc for ad5933
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH] iio: core: check 'info' value before registering the device
  • From: Andi Shyti <andi@xxxxxxxxxxx>
• Re: [PATCH 3/3] iio: chemical: sps30: add device tree support
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: replaced kfifo by triggered_buffer
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH] staging: iio: ad5933: add binding doc for ad5933
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v5 15/15] iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: adc: ad7280a: add braces to complex for loops
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] staging: iio: adc: ad7280a: fix overwrite of the returned value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Questions about the contributing process
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Inconsistent SMO8840 accelerometer data between Windows and Linux
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/3] staging: iio: adc: ad7280a: add braces to complex for loops
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 2/3] staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 1/3] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 0/3] staging: iio: adc: ad7280a: channel and attr init refactor
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• [PATCH 1/1] staging: iio: adc: ad7280a: fix overwrite of the returned value
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• Re: [PATCH 1/3] iio: add IIO_MASSCONCENTRATION channel type
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Questions about the contributing process
  • From: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
• Re: Questions about the contributing process
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] staging: iio: ad7606: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: ad7780: Add gain & filter gpio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: ad7780: Moving ad7780 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Replace license text w/ SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>