Set a single voltage regulator for all voltage references.
Remove voltage reference value from default platafrom data struct.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
Signed-off-by: Gabriel Capella <gabriel@xxxxxxxxxxx>
Co-Developed-by: Gabriel Capella <gabriel@xxxxxxxxxxx>
---
drivers/staging/iio/impedance-analyzer/ad5933.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index 9e52384f5370..730bc397a26b 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -91,7 +91,6 @@
struct ad5933_platform_data {
unsigned long ext_clk_hz;
- unsigned short vref_mv;
};
struct ad5933_state {
@@ -113,7 +112,6 @@ struct ad5933_state {
};
static struct ad5933_platform_data ad5933_default_pdata = {
- .vref_mv = 3300,
};
#define AD5933_CHANNEL(_type, _extend_name, _info_mask_separate, _address, \
@@ -691,7 +689,7 @@ static void ad5933_work(struct work_struct *work)
static int ad5933_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- int ret, voltage_uv = 0;
+ int ret;
struct ad5933_platform_data *pdata = dev_get_platdata(&client->dev);
struct ad5933_state *st;
struct iio_dev *indio_dev;
@@ -718,12 +716,12 @@ static int ad5933_probe(struct i2c_client *client,
dev_err(&client->dev, "Failed to enable specified VDD supply\n");
return ret;
}
- voltage_uv = regulator_get_voltage(st->reg);
+ ret = regulator_get_voltage(st->reg);
+
+ if (ret < 0)
+ goto error_disable_reg;
- if (voltage_uv)
- st->vref_mv = voltage_uv / 1000;
- else
- st->vref_mv = pdata->vref_mv;
+ st->vref_mv = ret / 1000;
if (pdata->ext_clk_hz) {
st->mclk_hz = pdata->ext_clk_hz;
--
2.17.1
