When using the internal clock the device has an option in which the clock
output is available on MCLK2 pin. This patch adds a dt binding for enabling
this property.
Signed-off-by: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
---
drivers/staging/iio/adc/ad7192.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 8a4e6ede42b3..a11c8a82bb7c 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -611,6 +611,10 @@ static const struct iio_chan_spec ad7193_channels[] = {
static int ad7192_clock_select(struct spi_device *spi, struct ad7192_state *st)
{
int ret;
+ bool clock_out_en;
+
+ clock_out_en = of_property_read_bool(spi->dev.of_node,
+ "adi,int-clock-output-enable");
st->clock_sel = AD7192_CLK_EXT_MCLK2;
st->mclk = devm_clk_get(&spi->dev, "clk");
@@ -626,7 +630,10 @@ static int ad7192_clock_select(struct spi_device *spi, struct ad7192_state *st)
return PTR_ERR(st->mclk);
/* use internal clock */
- st->clock_sel = AD7192_CLK_INT;
+ if (!clock_out_en)
+ st->clock_sel = AD7192_CLK_INT;
+ else
+ st->clock_sel = AD7192_CLK_INT_CO;
st->fclk = AD7192_INT_FREQ_MHZ;
}
}
--
2.17.1
