[PATCH v2 1/4] iio: ti-ads124s08: Add DT binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding binding documentation for Texas Instruments ADS124S08
and ADS124S06 ADC.

S08 is a 12 channel ADC
S06 is a 6 channel ADC

Datesheet can be found here:
http://www.ti.com/lit/gpn/ads124s08

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---

v2 - Fixed incorrect compatible example and removed vref-supply - https://lore.kernel.org/patchwork/patch/1021047/

 .../bindings/iio/adc/ti-ads124s08.txt         | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
new file mode 100644
index 000000000000..6993e76e61c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt
@@ -0,0 +1,23 @@
+* Texas Instruments' ads124s08 and ads124s06 ADC chip
+
+Required properties:
+ - compatible: Should be "ti,ads124s08" or "ti,ads124s06"
+ - reg: spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+ - spi-cpha: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - reset-gpios: GPIO pin used to reset the device.
+
+Example:
+adc@0 {
+	compatible = "ti,ads124s08";
+	reg = <0>;
+	spi-max-frequency = <1000000>;
+	spi-cpha;
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+};
-- 
2.20.0.rc2.7.g965798d1f2




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux