On 1/12/19 1:28 PM, Jonathan Cameron wrote:
On Fri, 11 Jan 2019 15:53:59 -0500
Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx> wrote:
BME680 is a pressure/temperature/humidity/voc sensor.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
Hmm. We could add the VDD and VDIO regulators perhaps.
Driver assumes they are on currently but we'll get a board where control
is needed sooner or later. I'm not that fussed about this though.
If that's fine with you, i prefer to leave it as it is right now as i
don't feel
confident enough to correctly explain it in the Documentation.
But if you have more input, you are more then welcome!
Jonathan
---
.../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
new file mode 100644
index 000000000000..885a1b918340
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
@@ -0,0 +1,11 @@
+Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
+
+Required properties:
+- compatible: must be "bosch,bme680"
+
+Example:
+
+bme680@77 {
+ compatible = "bosch,bme680";
+ reg = <0x77>;
+};
