Re: [PATCH] iio: adc: qcom-spmi-adc5: Initialize prescale properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 8 Dec 2018 12:05:15 +0000
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:

> On Tue, 4 Dec 2018 11:57:32 -0800
> Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> 
> > On Tue, Dec 04, 2018 at 11:14:19AM -0800, Evan Green wrote:  
> > > adc5_get_dt_data uses a local, prop, feeds it to adc5_get_dt_channel_data,
> > > and then puts the result into adc->chan_props. The problem is
> > > adc5_get_dt_channel_data may not initialize that structure fully, so a
> > > garbage value is used for prescale if the optional "qcom,pre-scaling" is
> > > not defined in DT. adc5_read_raw then uses this as an array index,
> > > generating a crash that looks like this:
> > > 
> > > [    6.683186] Unable to handle kernel paging request at virtual address ffffff90e78c7964
> > > Call trace:
> > > qcom_vadc_scale_code_voltage_factor+0x74/0x104
> > > qcom_vadc_scale_hw_calib_die_temp+0x20/0x60
> > > qcom_adc5_hw_scale+0x78/0xa4
> > > adc5_read_raw+0x3d0/0x65c
> > > iio_channel_read+0x240/0x30c
> > > iio_read_channel_processed+0x10c/0x150
> > > qpnp_tm_get_temp+0xc0/0x40c
> > > of_thermal_get_temp+0x7c/0x98
> > > thermal_zone_get_temp+0xac/0xd8
> > > thermal_zone_device_update+0xc0/0x38c
> > > qpnp_tm_probe+0x624/0x81c
> > > platform_drv_probe+0xe4/0x11c
> > > really_probe+0x188/0x3fc
> > > driver_probe_device+0xb8/0x188
> > > __device_attach_driver+0x114/0x180
> > > bus_for_each_drv+0xd8/0x118
> > > __device_attach+0x180/0x27c
> > > device_initial_probe+0x20/0x2c
> > > bus_probe_device+0x78/0x124
> > > deferred_probe_work_func+0xfc/0x138
> > > process_one_work+0x3d8/0x8b0
> > > process_scheduled_works+0x48/0x6c
> > > worker_thread+0x488/0x7cc
> > > kthread+0x24c/0x264
> > > ret_from_fork+0x10/0x18
> > > 
> > > Unfortunately, when I went to add the initializer for this and tried to
> > > boot it, my machine shut down immediately, complaining that it was
> > > hotter than the sun. It appears that adc5_chans_pmic and adc5_chans_rev2
> > > were initializing prescale_index as if it were directly a divisor,
> > > rather than the index into adc5_prescale_ratios that it is.
> > > 
> > > Fix the uninitialized value, and change the static initialization to use
> > > indices into adc5_prescale_ratios.
> > > 
> > > Signed-off-by: Evan Green <evgreen@xxxxxxxxxxxx>
> > > ---
> > > 
> > >  drivers/iio/adc/qcom-spmi-adc5.c | 58 +++++++++++++++++---------------
> > >  1 file changed, 31 insertions(+), 27 deletions(-)
> > > 
> > > diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> > > index f9af6b082916b..6a866cc187f7d 100644
> > > --- a/drivers/iio/adc/qcom-spmi-adc5.c
> > > +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> > > @@ -423,6 +423,7 @@ struct adc5_channels {
> > >  	enum vadc_scale_fn_type scale_fn_type;
> > >  };
> > >  
> > > +/* In these definitions, _pre refers to an index into adc5_prescale_ratios. */
> > >  #define ADC5_CHAN(_dname, _type, _mask, _pre, _scale)			\
> > >  	{								\
> > >  		.datasheet_name = _dname,				\
> > > @@ -443,63 +444,63 @@ struct adc5_channels {
> > >  		  _pre, _scale)						\
> > >  
> > >  static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
> > > -	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 1,
> > > +	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 0,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 1,
> > > +	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 3,
> > > +	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 3,
> > > +	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 1,
> > > +	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
> > >  					SCALE_HW_CALIB_PMIC_THERM)
> > > -	[ADC5_USB_IN_I]		= ADC5_CHAN_VOLT("usb_in_i_uv", 1,
> > > +	[ADC5_USB_IN_I]		= ADC5_CHAN_VOLT("usb_in_i_uv", 0,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_USB_IN_V_16]	= ADC5_CHAN_VOLT("usb_in_v_div_16", 16,
> > > +	[ADC5_USB_IN_V_16]	= ADC5_CHAN_VOLT("usb_in_v_div_16", 8,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_CHG_TEMP]		= ADC5_CHAN_TEMP("chg_temp", 1,
> > > +	[ADC5_CHG_TEMP]		= ADC5_CHAN_TEMP("chg_temp", 0,
> > >  					SCALE_HW_CALIB_PM5_CHG_TEMP)
> > >  	/* Charger prescales SBUx and MID_CHG to fit within 1.8V upper unit */
> > > -	[ADC5_SBUx]		= ADC5_CHAN_VOLT("chg_sbux", 3,
> > > +	[ADC5_SBUx]		= ADC5_CHAN_VOLT("chg_sbux", 1,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_MID_CHG_DIV6]	= ADC5_CHAN_VOLT("chg_mid_chg", 6,
> > > +	[ADC5_MID_CHG_DIV6]	= ADC5_CHAN_VOLT("chg_mid_chg", 3,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 1,
> > > +	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 0,
> > >  					SCALE_HW_CALIB_XOTHERM)
> > > -	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
> > > +	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
> > > +	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
> > > +	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_AMUX_THM2]	= ADC5_CHAN_TEMP("amux_thm2", 1,
> > > +	[ADC5_AMUX_THM2]	= ADC5_CHAN_TEMP("amux_thm2", 0,
> > >  					SCALE_HW_CALIB_PM5_SMB_TEMP)
> > >  };
> > >  
> > >  static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
> > > -	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 1,
> > > +	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 0,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 1,
> > > +	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 3,
> > > +	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 3,
> > > +	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_VCOIN]		= ADC5_CHAN_VOLT("vcoin", 3,
> > > +	[ADC5_VCOIN]		= ADC5_CHAN_VOLT("vcoin", 1,
> > >  					SCALE_HW_CALIB_DEFAULT)
> > > -	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 1,
> > > +	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
> > >  					SCALE_HW_CALIB_PMIC_THERM)
> > > -	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
> > > +	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
> > > +	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
> > > +	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 1,
> > > +	[ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 1,
> > > +	[ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > > -	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm_100k_pu", 1,
> > > +	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm_100k_pu", 0,
> > >  					SCALE_HW_CALIB_THERM_100K_PULLUP)
> > >  };
> > >  
> > > @@ -558,6 +559,9 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
> > >  			return ret;
> > >  		}
> > >  		prop->prescale = ret;
> > > +	} else {
> > > +		prop->prescale =
> > > +			adc->data->adc_chans[prop->channel].prescale_index;
> > >  	}
> > >  
> > >  	ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);    
> > 
> > Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > 
> > Good as an immediate fix.
> > 
> > In the long term I wonder if it would be better to pass a ratio to
> > ADC5_CHAN_XYZ and store it in struct adc5_channel_prop, instead of
> > specifying the index, which is more error prone and errors are harder
> > to spot. With this adc5_prescale_ratios would still exist, but only be
> > used for the sanity check of prescaling values from the DT.  
> 
> I am going to let this sit for a little longer to let Siddartha have
> a chance to comment as well.  We are getting late this cycle
> so this may end up going upstream at the start of the next one
> (as it'll be marked for stable that shouldn't matter much).
> 
> Poke me if I seem to have forgotten it in a week or so.
I've applied this to the togreg branch of iio.git so it'll go in
during the next merge window (hopefully).  Marked for stable.

Thanks,

Jonathan

> 
> Thanks,
> 
> Jonathan
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux