Hi Denis, On Tue, Jan 15, 2019 at 8:18 AM Denis CIOCCA <denis.ciocca@xxxxxx> wrote: > I am not familiar with ACPI and I am not sure why axis orientation is not following the standard there. > What I wonder is if this is related to SMO8840, Acer or in general to ST accelerometers integration. Your patch seems to be fine technically but are you able to confirm it will works even outside the 3 parts tested? The other accel supported by ACPI probing SMO8A90 is affected also? The _ONT data format was explained to us by a vendor support contact at ST. (however, the fact that the _ONT transformation must be applied after first applying another translation was determined experimentally by me). We have seen this _ONT data present in ACPI tables from multiple product vendors, on SMO8820, SMO8821 and SMO8840 devices, so I believe there is no doubt that it is a ST-specific thing. The specific transformation behaviour in my patch has only been tested on products with SMO8840 though, since those are the only ones we have on hand. Daniel
